Impossible to reduce more than half my drive?

Similar Questions

• On the start with progress bar page, after that it becomes a little more than half, the computer turns off.

  MY MacBook Pro is frozen and I had to turn off get out of the frozen page and when I pressed the button to turn it on it makes the departure noise and then the progress bar lights. When it becomes a little to Midway, the screen goes black and the computer turns off.

  The progress bar that starts from the left end appears when your startup disk is too damaged to mount. The illustrious progress is the functioning of the equivalent of disk utility (ERD). He is never more than half before taking a decision.

  If your drive CAN be mounted, start-up continues normally.

  If your drive cannot be mounted, your Mac stops, because there is nothing productive that it can do.

  If your Mac is trying to start and crashes, which can produce always different results, but that doesn't seem to be the case here.

  I recommend that you start in recovery and run utility disk (ERD) until it comes clean or is hopelessly.

• My thunderbird has not IE half on it less. where the deletion was there is just a list of emails seems I've lost more than half

  Thunderbird, the screen has been more or less separated half - half superior containing e-mail messages that have been received and any new ones coming in

  more than half used to hold on the right hand side Rrply before Archive Junk remove with e-mail selected under this

  This lower part of it does not appear that this is just a continuation of the e mails already received

  How can I fix this?

  Thank you

  You mean that the message pane is missing? The F8 key is supposed to that switch. If this is not the case, open the view menu for the page layout and check the message pane element.

• more than half of the bookmarks have dissappeared. NO backup

  more than half of the bookmarks are dissaperaed. I have no backup

  See this article.
  
  https://support.Mozilla.com/en-us/KB/lost+bookmarks

• More than half of the albums on my new e260 are not displayed

  Hi - I just bought a v2 e260.   I have an e250 v1 that I had planned to give to my sister once I transferred all my music and podcasts.

  I transferred a bunch of albums by 8 artists, as well as podcasts, the e250, and only 3 artists (most all the podcasts) appear on the e260.  Missing music does in Albums, Genres or songs either.

  I know they're there, because I can see all the files when I look at the Sansa e260\Music folder in Windows Explorer.

  Everything has good ID tags - e250 I see all my music - artists, Albums, Genres and songs.

  I deleted everything, updated the firmware and copied all the files on the e260, but exactly the same thing happened.

  I hope someone can help because it's very annoying.

  Thank you.

  OK - I have solved my problem.

  After looking around these forums, and the other thing that the iPod one, I thought it might have something to do with USB mode.   By default, it had been at PSG, but the e250 was in MSC.

  So I deleted all of the e260, put it in MSC mode and copied all songs/podcasts vice versa.

  When I turned it back on, everything appear.

  Very happy now.

  However, I still can't understand why - in MTP mode - songs showed, but more than half did not.   I can't see the logic, and it's frustrating.

• the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

  topic says it all...

  the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

  Hello

  ' HP ' how-to ' article should be useful.

  My e9280t has the same firm and the drive cage holds two drives.

• Can I use more than one flash drive to ready boost on Satellite L650/0ed

  Hello

  I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.

  In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".

  Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.

  Thank you
  -Brent907

  Hi mate

  Please check this Microsoft page that describes the ReadyBosst
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  There, you can find this statement:
  + ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +

  I hope this can be useful!

• Configuration of nodes: impossible to declare more than 1 node for each type

  Hello

  MAWI 2.20

  I'm starting a new project for the 11.5.8 to 11.5.10.2 update. I'm configuration mawi for the project (defe nodes) but I have some problems to do.

  My environment is 11.5.8 with 1 db node and 4 application (not in appl_top shared) server: 1 Admin/CM nodes, node 1 of discoverer and 2 forms/web /.

  I tried all my knots said but it seems I can't declare more than 1 node 1 type (web and forms). So when I try to declare my second/forms web server it replace the previous, I said, and it is not added to the existing nodes.

  How can I do to cedlare all my knots for my environment?

  Thanks in advance

  Christophe Ortiz

  
  

  No need to answer. I'ev found my answer in the FAQ on the MAWI.

• Just reinstalled Windows 8, which wiped the drive hard, but now it says my hard drive is using more than half of its capacity, although it should be nearly empty.

  The title says it all.

  I reinstalled windows 8 which apparently erased from my hard drive. After starting my computer upward even once, I noticed that I had free 826GBs of 1.81 on my hard drive (Local disk (c)), even if it should be almost empty. When I pointed out all the contents of my hard drive and go to properties of what he says his only help 114GBs of space, unlike what 'My Computer' told me.

  I noticed that a folder in the drive Local (c) entitled "Windows.old" which has my old program files that would make account 96GBs of used space. I tried to remove that but he told me that I needed permission from the "SYSTEM".

  I need help with this problem, I still have to put my old files on my computer, which I'm sure that will exceed the alleged free space I have. If anyone can help me, I'd appreciate a step by step explanation. I can handle a correct amount of talk about the computer, but a lot of it goes over my head.

  Thanks :)

  FORGIVE ME IF I PUT THIS UNDER THE WRONG TOPIC!

  Try this:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-remove-the-Windows-old-folder

• My computer eating more than half of RAM while doing nothing

  I don't know what is happening, but my ram keep going crazy today than before. at the time my computer to eat than 700 to 1200 MB same I use so much application it does only 1 700 MB, but today, I'm not doing anything he can hit 1 700 MB and when I opened my Chrome he hit from 2100 to 2700 MB, and if I open Skype it struck 3700 MB.

  Now when I post this question while opening windows media player, it remained between 1700 to 2000 MB

  can someone help me please:'O
  I use win7 ultimate 64-bit
  My specs:
  Gigabyte
  i5-2400 @3. 10 GHz (4 CPUs), ~3.3GHz
  4096 MB RAM (DDR3)
  NVIDIA GeForce GT 220 (2762 mb)
  And also I have installed Java on my computer, is Java really eat so much RAM? because it's in my computer

  Check the Task Manager > processes to see exactly what is running. Look for first two process
  use relatively large amounts of RAM, for example 50 000 k or more.
  If you see a program using a lot of RAM and you do not need this program that runs in the background all the time then you can stop it to load with Windows through the Configuration of the system
  (Type msconfig in the command run or start search for the menu bar to open Sys Config).
  Go to the Startup tab and uncheck the box next to any program that you know you don't need
  having loading when you start in Windows.

  If you can't find anything using a lot of memory when you view the Task Manager, you run
  a time to start full scan with your antivirus.

  64-bit Win7 use more RAM than a 32 bit OS. Mine is never less than approximately 1.35 GB at idle.
  It should be a fairly intensive system to use the 2 GB remaining, so it is
  no need to worry too much how much RAM is used at the time.

  Java is necessary and do not use a lot of RAM by itself. Java is not yet listed in the process
  on my machine at the moment.

  .

• Impossible to get more than 1 channel to read with DAQmx cDAQ-9172 under Windows 7

  I have the cell load, voltage, and input thermocouple connected to a cDAQ-9172. My sensors entries have been scaled and verified in MAX, and all of them work.  DASYLab 13, the driver is "dcDASY.dll" and the hardware configuration is "NI MAX.

  When I add a task NEITHER-DAQmx Analog Input (that is, a set of scales) it appears correctly. If I add a second channel of the task and select it, I get this message:
  'Channel of task name saved with the module is not available. DASYLab resets the module parameters for usable first channel name task. »
  The name of the task remains the same for each new channel I have Add. If I change the name of the task by using the tab to the drop down menu, it says:
  "You have configured several ways out for the module. If you modify the task, you lose the settings. You want to change the task? »
  Both display the same data channels, and I can't work simultaneously several channels. It seems I missed something obvious, but I can't.

  The parameters are:

  Measurement and Automation Explorer 4.6.1
  NOR-DAQmx 9.0

  Material:-cDAQ-9172
  Slot 1 - NOR 9215 (0-10 Vdc analog voltage)
  Slot 2 - NEITHER 9211 (thermocouple)
  slot 3 - NI 9481 (relay)
  slot 4 - NI 9237 (entry deck w / excitement)
  housing 5 - OR 9402 (DIO)
  slot 6 - NI 9263 (0-10 Vdc output analog)

  Thank you

  You can't perform different tasks (continuous) HERE on a single chassis. The first tasks that starts will be 'the resource booking '.

  Combine the AIs of the various modules in a single task (see photo): start by creating the task of thermocouple. Then add AIs 9237 (e.g. Kraft) and 9215 (volts) using the button with the blue, symbol. Set the mode of synchronization of the task of "continue". Save the task, start DASYLab (second photo).

  Change a task (adding channels, etc.) to the MAX while DASYLab works always, will result in unexpected behavior. To synchronize the configuration of MAX with DASYLab, you will need to close/restart DASYLab or use the 'sync' of the function (see photo 3 "syncmax.jpg"). You can set this function as a shortcut by right-clicking on one of the eight green or grey circle things.

  You should think about an update of the MAX/DAqmx drivers. 9.x is a little outdated.

  Updated at least DAQmx 9.9, better 14.x or 15. 0 (stay far 15 1.x).

• How to retrieve files I made on my gmail folders. More than half of the records have disappeared.

  I created a large number of different files, so I can save some important emails and now half the files are missing and I can't seem to get back them

  Hello

  Gmail and Forum Help Center, see:

  Gmail - Help
  http://support.Google.com/mail/?hl=en

  Gmail - Forum
  http://productforums.Google.com/Forum/#! Forum/gmail

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• SSL VPN 25 user license - impossible to get more than 2 SSL VPN connections

  Hello

  I just installed a user license user Premium 25 for SSL VPN on my Cisco ASA5505.  Even though it states that the license is installed I get still only two client Anyconnect SSL VPN connections and the third fails systematically.  What Miss me?

  Thanks for posting to the forum and that the problem has been resolved, and what caused the problem and what has been done to solve the problem. It's the most useful forum when people can read on a problem and can also read what the problem turned out to be and what was done to solve the problem, I think that it is also a good example to remind us that sometimes, the problem is not in our configuration, or even in the area that we administer. So sometimes we have to look beyond our normal home to find the source of the problem.

  The question mark it resolved makes it even more obvious to readers that they will find a solution to the problem. So thank you to mark the issue as resolved.

  HTH

  Rick

• Comment can't see more than a floppy drive

  Yes, it sounds ridiculous, but my XP guest will never see the first floppy drive. I set both of them in the settings, but I can still access the first.

  You must go into the BIOS of the virtual machine and explicitly activate the second floppy drive.

  To access the BIOS, restart your VM and quickly press F2 (or Fn + F2 on your laptop) in the start screen to access the BIOS. You can also press ESC to access the boot selection screen and choose "Enter Setup" to do the same. If the start screen flashes by too quickly, you can slow down it as described in the User Guide has VMware Fusion power.

• More than half of my screen went dark on my old monitor?

  Original title; Display problem

  The monitor CRT Samsung regarded 56v, old enough, but up to 2 days back worked perfect. Now, the screen is dark on one side (right side and Center too) while most left is normal, the dark side covers almost 70% of the screen. That's the problem with the monitor, or anything else on the CPU Cabinet? Please let me know how to solve this problem.

  The position of the screen has been changed or whatever it is was recently been placed near him, say a speaker?

  Try another monitor and try the monitor on another computer. This will restrict the cause of a failure of the computer video or monitor. The symptom points quite strongly to the fault of the monitor. If so, the only remedy will be repair or replacement.

  Tom Ferguson