Impossible to travel from the LAN computers through a router from cisco 887vdsl
Hi I installed a router CISCO v887 to the Amsterdam Office
I set up a VPN between AMS and Edinburg Office tunnel.
1. the VPN is running
2. I am unable to see anything of the LAN computers at the office in Amsterdam.
3 from computers LAN I can traceroute to yahoo.com but the browser I impossible to navigate on yahoo.com and web page hanged in this situation (Web site waiting for response). But nothing comes and LAN users are unable to use internet.
Help, please
My configurations are
IP source-route
!
!
!
!
IP cef
IP domain name xxxxxx.com
8.8.8.8 IP name-server
No ipv6 cef
!
username xxxxxxxxxxxxxxxxx
username xxxxxxxxxxxxxxxxxxx
!
!
VDSL controller 0
!
property intellectual ssh version 1
property intellectual ssh pubkey-string
username xxxxxxx
ssh - rsa xxxxxxxxxxxxxxxxxxx key hash
quit smoking
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP crypto key xxxxxxxxxx address 94.xx.xx.xx
!
!
Crypto ipsec transform-set esp - esp-sha-hmac AMS - SET
!
map AMS - R 10 ipsec-isakmp crypto
the value of 94.xx.xx.xx peer
AMS - Set transform-set
match address 102
!
!
!
!
!
interface Ethernet0
no ip address
PPPoE-client dial-pool-number 10
!
!
interface Ethernet0.6
encapsulation dot1Q 6
PPPoE-client dial-pool-number 10
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
!
interface FastEthernet0
load-interval 30
Speed 100
PPPoE-client dial-pool-number 10
!
!
interface FastEthernet1
!
!
interface FastEthernet2
!
!
interface FastEthernet3
!
!
interface Vlan1
10.0.12.1 IP address 255.255.255.0
IP nat inside
activate nat IP
IP virtual-reassembly
!
!
interface Dialer0
no ip address
Shutdown
!
!
interface Dialer10
the negotiated IP address
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 10
Dialer-group 10
PPP authentication pap callin
PPP chap hostname xxx@xxx-ZDSL
PPP chap password 0 xxx
PPP pap sent-username@xxx-ZDSL password 0 xxx xxxx
No cdp enable
AMS - R-crypto card
!
!
IP forward-Protocol ND
IP http server
no ip http secure server
!
!
IP nat inside source overload map route sheep interface Dialer10
IP route 0.0.0.0 0.0.0.0 Dialer10
!
access-list 102 permit ip 10.0.12.0 0.0.0.255 10.0.0.0 0.0.3.255
access-list 102 permit ip 10.0.12.0 0.0.0.255 172.16.0.0 0.0.255.255
access-list 102 permit ip 10.0.12.0 0.0.0.255 172.17.0.0 0.0.255.255
access-list 102 deny ip any one
access-list 175 deny ip 10.0.12.0 0.0.0.255 10.0.0.0 0.0.3.255
access-list 175 deny ip 10.0.12.0 0.0.0.255 172.16.0.0 0.0.255.255
access-list 175 deny ip 10.0.12.0 0.0.0.255 172.17.0.0 0.0.255.255
access-list 175 allow ip 10.0.12.0 0.0.0.255 any
Dialer-list 10 ip protocol allow
Dialer-list 1 ip protocol allow
!
!
!
sheep allowed 10 route map
corresponds to the IP 175
!
!
control plan
!
!
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
access-class 1
exec-timeout 30 0
privilege level 15
password xxxxxx
local connection
preferred transport ssh
entry ssh transport
!
max-task-time 5000 Planner
end
Hi Marc,
Please add these lines highlighted below on both interfaces.
interface Vlan1
IP tcp adjust-mss 1412
interface Dialer10
IP mtu 1452
Please update.
Thank you
Tags: Cisco Security
Similar Questions
-
Impossible to replace and update a file in the client computers through Group Policy preferences
Hello
I am unable to replace and update a file in the client computers through Group Policy preferences.
For example,.
I am trying to replace and update a custom calendar file (c:\Program Files\Microsoft Office\Office12\1033\outlook.hol)to client computers through Group Policy ptreferences (political group: computer configuration\group policy setting \file preference\windows).) But it is not updated and replaced in client computers.
Could you please help me on this?
THnaks
Srinivasan
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
http://social.technet.Microsoft.com/forums/en/winserverGP/threads
-
Windows updates are getting impossible to install on the XP computers
Hello
Windows updates are getting impossible to install on the XP machines.
I completed all the steps listed in http://www.pbcomp.com.au/windows-xp-updates-fail.html this link.I tried running the FixIT http://support.microsoft.com/kb/971058#LetMeFixItMyselfAlways but an unexpected error has occurred,
Please suggest.
Thank you
AartiQ: is - what these WinXP computers belong to you or...?
R: No.It is a forum for specific consumers. Try to post here instead,-online http://social.technet.microsoft.com/Forums/en/itproxpsp/threads
Good luck.
-
LAN problem: Vista PC does not connect to the XP PC through a router
My setup: laptop XP SP3, laptop Vista Home premium SP1, Fritz! Box 7270 as ADSL Modem, router and gateway.
Since the Installation of the SP3 on XP laptop PC Vista can no longer access the XP PC. Vista indicates the XP Machine occasionally, but cannot connect. Error 0 x 80070035. Ping from Vista to XP translates to time limit.
XP PC can connect to the Vista PC and use all the services available.
I am a user experienced with the good network of expertise. I checked the configuration settings and tested alternative parameters. I installed KB 922120V6-x86D DTBT Protocol on the XP PC. No change in the behavior of the network.
Internet connection through the gateway works fine on both machines.
Useful tips are very much appreciated
Karl
You have probably two firewalls running on XP is the first place to check. If you have a software firewall or antivirus/security of the third party with its own firewall component, the built-in Windows Firewall should not be running and it probably is. Or are looking for a firewall neglected in the VPN software if you use it. MS - MVP - Elephant Boy computers - don't panic!
-
E1505 with Vista operating system repeatedly lose the connection network through a router WRT54G
Model: Dell E1505
OS: Vista Edition Home Premium
Processor: Intel Core 2 Duo CPU T5300, 1.73 GHz
Device of wireless network: Dell Wireless 1390 WLAN Mini Card
Wireless router: Linksys WRT54G
My E1505 has a problem with the Wi - Fi being dropped at least twice a day / every day with an average of seven hours of use per day. Almost identical to several offers from others, as I'm surfing the web and try to access another site, the connection just drops and I get the white screen indicating a network connection cannot be made. Meanwhile, my utility for wireless LAN card reflects that I have a connection 'very strong' or even 'excellent '. The only way to connect is to restart the computer. I did a lot of research on the Internet and tried all the suggested actions to solve the problem (changing the settings of the power of the highest performance, by changing the channel of the router, updated drivers, etc.), but none of them have cured the problem. I also spent more than 12 hours to talk or have a Dell technician remotely access my laptop to try and fix the problem, but nothing helped. In the end, the so-called expert technician said they did everything possible and suggested I reload Vista on my computer again, or wait for the Vista Service Pack comes out with the hope that the problem is solved.
Can someone please! It seems that I left without other alternatives, but to spend the next eight hours, reload all my programs that are inexcusable.
Thanks in advance for your help.
Here are the results of the IPCONFIG/ALL command:
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\damoke>ipconfig/all
Windows IP configuration
Name of the host...:-command post
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
... DNS suffix search list: dc.dc.cox.net
Ethernet connection to the Local network: State media: Media disconnected
The connection-specific DNS suffix. : dc.dc.cox.net
... Description: Broadcom 440 x 10/100 Integrated Controller
Physical address.... : 00-19-B9-70-FF-E2
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Wireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. : dc.dc.cox.net
... Description: Dell Wireless 1390 WLAN Mini Card
Physical address.... : 00-1B-FC-44-A3-D5
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::ac77:a83:c3bf:c801 %9 (Preferred)
IPv4 address: 192.168.1.100 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Saturday, April 12, 2008 20:22:10
End of the lease...: Sunday, April 13, 2008 20:22:09
... Default gateway. : 192.168.1.1.
DHCP server...: 192.168.1.1.
DHCPv6 IOOKING...: 167779324
DNS servers...: 68.105.28.12
68.105.29.12
68.105.28.11
NetBIOS over TCP/IP...: enabled
Card tunnel Local Area Connection * 6:
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 02-00-54-55-4E-01
DHCP active...: No.
Autoconfiguration enabled...: Yes
IPv6 address: 2001:0:4137:9e50:203 b: 1 ca 1: 3f57:fe9b (Preferred)
Address IPv6 local link...: fe80::203b:1 ca 1: 3f57:fe9b %8 (Preferred)
... Default gateway. : ::
NetBIOS over TCP/IP...: disabled
Card tunnel Local Area Connection * 7:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Card 6TO4
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Card tunnel Local Area Connection * 10:
The connection-specific DNS suffix. : dc.dc.cox.net
Description...: isatap.dc.dc.cox.net
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::5efe:192.168.1.100%11(Preferred)
... Default gateway. :
DNS servers...: 68.105.28.12
68.105.29.12
68.105.28.11
NetBIOS over TCP/IP...: disabled
C:\Users\damoke
Message edited by MOKE DA 12/04/2008 21:24Message edited by MOKE DA 12/04/2008 21:25
-
Hello
I am planning to move to our new home in the country next year where I won't have highspeed internet (15 MB / Sec) and the threshold of large data capacity (250 GB) (Comcast).
Currently we will be able to get the wild blue Satellite service (1.5 MB / Sec) with a 7-12 GB monthly Cap
I am currnelty use 75 GB per month to update the 5 computers and stream netflix movies and download all my podcasts.
May - some please point me in the direction where Microsoft provides the service / ability to download and manage these patches via a MS unique source and then I could build rivierra deposit on my LAN?
I know that it is available for business facilities it would be nice to be able to install this feature for the professional user home / small.
Kind regards
Dennis
Security updates are available on ISO-9660 DVD5 from the Microsoft Download Center image files
http://support.Microsoft.com/kb/913086More options on the page of my colleague TaurArian: http://taurarian.mvps.org/
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Small inter-office network with 7 machines, no server. Two other XP, WIN7 machines. All have already appeared on my workstation running WIN7-65. Today, I noticed that only the share on my workstation presents in the
in Windows Explorer. Printers, scanner, fax, always there. I can connect through ftp, http and e-mail address of the computer that holds these programs and can ping all the machines successfully. But mounted network drives does not connect and, as I said, none of the other computers show in Explorer.
I had problems with Windows Virtual PC - would install not the integration features. So I deleted and reinstalled. Then it loads the integration... features for a few days... now won't again. I also installed VMware with XP virtual PC. I disabled virtual machine network maps to see if there was any change. No change.
I don't know when the computers on the LAN disappeared, because I had no reason to seek. I discovered that they were gone when a backup program could not set up a share on one of them.
Anyone has any ideas, what can happen?
Hello
I suggest that you enable network discovery. Click on start-> Control Panel-> network and sharing Center, click on change settings for sharing advanced. Activate the option.
If the problem persists, try to access another computer by entering \\computername in the box to start the search. Let us know if it works properly
See you soon,.
-
The computers on the LAN cannot print on old HP Officejet j5780 printer.
HP Pavilion hpe h8 - 1360t 64 - bit, OS Windows 7 Home Premium. Old LAN had computer of Windows Vista 32 - bit OS and computer from Windows Vista 32 - bit OS with the USB printer connected to it. I was able to print on both computers. I bought the computer HP has declared earlier and installed in place of the original. The drivers for the USB Officejet j5780 printer have been updated to 64-bit and works very well with the new computer. The old 32-bit computer connected to the LAN does not print. Both computers recognize the LAN and connected devices. When printing is attempted on the old computer, the print job is sent without error, but does not appear on the computer, this printer is connected to. I created the LAN with Windows network and sharing.
Thanks for the reply. I discovered in a document of Windoows is you have this problem with computers with different operating systems on the same LAN-in my case vista and windows 7 - change users under the same name on all computers. I did it and my two computers can share files and folders and print.
-
Only 1 of the 2 computers in my LAN recognizes my static IP address assigned by my ISP - HELP!
I have an IP address from my ISP, but only one of the two computers in my LAN presents this static IP address in the "ipconfig" and it connects to the internet, the other computer Watch has "169.254.XXX.XXX' IP address and does not connect to the internet. How can I fix it? I don't know much about the TCP/IP settings. OS is XP Pro SP3. I have a DSL router from single port connected to a simple switch 5 ports, then two CAT5 cables will switch on both computers.
Thanks for your help!
derisk
Hello
Two computers cannot connect to the same connection using the same IP address. Each computer on the network must have its own unique IP address.
You need to get a cable/DSL router. Configure the WAN port (Internet) side with your static IP address and connect all the computers the and other equipment network on the side of the router LAN.
Generally, it looks like this, http://www.ezlan.net/network/router.jpg
P.S. You don't need to use the wireless if you do not, it is very difficult to find a new wireless router.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Portege R500 hangs / pauses during the connection through the LAN
My Portege R500 is like that: when all using WIFI or 3G works fine but I would use LAN for best performance when he's at the office. As soon as the LAN cable is connected the machine starts making strange breaks for 1 to 2 seconds and I want to say break total, even the mouse pointer freezes on the screen. This happens every 5 to 10 seconds and stops immediately when you unplug the LAN.
Someone at - it solution or an explanation for that? Hardware error? I have all the latest drivers from Toshiba, even the latest firmware for both the computer and the built-in 3G modem. No strange software or bad - one abnormal behavior is used, antivirus is Trend OfficeScan and standard Windows Firewall is used.
Thanks in advance.
/ Magnus
You can test at home or elsewhere? It will be interesting if the same thing will happen if you connect your laptop to the router at home.
Have you talked about this with your local administrator?
What you can try is to update BIOS to see if this will change anything. -
Satellite A100-455: Impossible to install the LAN driver
Hello
I have recently re installed my dual boot Linux/Windows. Linux works fine, but under windows, it refuses to install the LAN Driver (Ethernet controller).
I installed before the chipset and it still does not work. All the drivers have been downloaded from the Web from Toshiba website.
Any idea on what could be the problem?
Thank you
Hello
I know that this question;
I think you just tried to install a LAN driver is not compatible.The A100-455 seems to belong to the PSAA9E series.
If you choose this series then you will find two different Lan drivers;
Intel v9.2.24 is a driver Pro1000 and Intel v8.0.43.0 is a driver of Pro100.Check both!
-
Configure the connection without my Windows XP CD?
I'm trying to connect 2 through a router (network) computers. The Network Setup Wizard tells me to insert my Windows XP CD, but I can't. Is there something that I can get online? What should I do?
Hi Humphrey2,
I suggest you arrange for an installation CD of Windows XP which may be necessary to copy the files to configure the network connection.
You can follow these links and check if the problem persists:
In Windows network connection issues
How to troubleshoot a network home in Windows XP?
Reference: Overview of the Network Setup WizardHope the helps of information.
-
WRT54GL cannot transmit from inside the LAN port?
Hello
I have a Server servers running several (HTTP, SVN, FTP,...) inside my network.
I used to have a SMC router in the past, and of course I had to use port forwarding.
This is why I realized that when we "talk" to the server, I can 'talk' to the router that will forward requests to the right compurer, based on the NAT table. If, for example, that if I move the SVN server, I don't have to change the path to the repository, change the NAT entry is OK in this case.
If this is not understandable, here 's another report.
However, I discovered that even if my new WRT54GL seems to be much more advanced, it cannot do this. Requests made to the router from within the local network are not transferred to the right place.
Is there a way to accomplish what we need, or at least a road map? It's sad that the SMC products otherwise is not very reliable can do...
Kind regards
Matej
Well, I have it solved.
I tried to convey the SVN, HTTP, FTP, and SSH.
However, it was not working when the server IP assigned by DHCP.
When I set up (the server within the LAN) to use the static IP address, not only that port forwarding began to make sense, but I have seen web pages by typing my public IP address in the browser on a computer inside the LAN.
What surprised me, is that it only worked when the server had assigned auto private IP address. I know that these addresses change so it would not very long work, but it did not work even before that t has changed...
-
computer Vista Home network is not visible from the XP computers
I have a home network with 4 computers. Both run Windows XP, Windows Vista is running and
It works in Windows 7. Each group can see all the others and can access shared files and printers
with one exception. Vista computer is not visible from the XP computers. It is visible from
the Windows 7 computer. I guess that there is a setting somewhere on the Vista machine
That I need to change, but I'm not.Thank you.
David
Hello
see Help for these links if
Networking of computers running different versions of Windows
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network
Setting up a network home
http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
Vista File and Printer Sharing
-
Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.
See this:
http://KB.mozillazine.org/Problems_printing_web_pages
Maybe you are looking for
-
Firefox setup your download was interrupted, please click the ok button to continue
I greeted by anti-virus and firewall. But can not go past this message. I used mozilla years but just recently he started acting. i.e.would not connect to some sites (not a problem earlier)
-
toolbar disappeared completely.
-
image of the contact does not appear next to contacts in messages
contact has A PICTURE, OTHER CONTACTS HAVE PHOTO MONTRANT
-
When I raise my documents, I want a folder and all subfolders inside.
Original title: missing files I'm working on Windows 8. When I raise my documents, I want a folder and all subfolders inside. When I look for them using search for documents, they appear. They all are highlighted in yellow. -What this means and h
-
Pan track envelope does not not in hearing CS6.
I set keyframes on a stereo track in Multi-track mode (far left and far right, then back to Center) and when read nothing happens. Panoramic mode in preferences is set on '-3bd Center. "Is - because it is practically the same waveform is on both cha