Impossible to update ESXi 4 with 1 day using the update utility

Similar Questions

• problem update to bind a member with an attribute using the rule of load

  Hi - I'm trying to update an existing Member with another attribute of the dimension of the attribute by using a load rule. In the properties to build the dimension, I have the name of the selected member where it says size. Underneath, I field Type, here, I have the dimension of the selected and then attribute below I have the number 0, to match with the child member, I'm trying to update for.
  
  I am able to validate the rule, no problem, but when I run the update plan, my attributes for this member does not update. This happens to all of my attributes.
  
  I'm on Essbase 7.0.
  
  
  Thank you

  You should (at least) two columns in your rule of load. The first column with the names of members of the basic members you want to associate attributes to and in the second column of the attribute member name.
  If the dimension build properties for the first column, you set the name of the dimension and type of build level or generation (I suggest level) and set the number of levels. (Do not forget the dimension properties build to build level or you will get an error)
  The second column, select the dimension then go down and select the dimension of the attribute that is associated with this dimension of the base

  For example for the Basic sample, you may have a line that looks like

  100-10 can

  For the first column, you would select Dimension = product, value of Type level = 0
  The second column would Dimension = product Type = attribute dimension Pkg Type

  In the dimension settings, make sure product is set to build level and can associate attributes and allows you to change the link.

• Control an ESXi server with vSphere client on the internet?

  I work for a company who manage multiple servers, most of which run ESXi. There are times where the machine virtual which is y executed is insensitive, or the crash. When this occurs often we have no other choice than to see and access the console from a client within the network. I was wondering if it was possible for me to open a port like 12345 and move to the ESXi host, giving me access to his inventory and power VM States and all the usual stuff, only remote rather than within the network. I want to know if it's possible, and what are the ports are necessary for me to do. I am aware that you can install as a virtual machine and the remote client in this, but I prefer to keep things as they are. I just want access to host servers ESXi by opening the Client vSphere on my own machine remotely and feeding the external IP address of customers and manage that way. Thanks for your time.

  Hello..

  Yes, it is indeed possible... All the ports that are required to achieve this are listed in the KB below:

  TCP and UDP Ports required to access other network, ESX hosts and vCenter Server components

  / Rubeck

• With an average using the "basic DC/eff' VI

  I seem to end up using the "basic DC/eff" VI a little average my data to my DAQ system. However, I have a question about what's going on "under the hood".

  Let's say, for simplicity I acquire data at 1 kHz into blocks of 1000 samples.

  Thus, all the 1 second I push 1000 samples in the VI-DC/RMS database as a data type of waveform.

  This means that the outputs 'DC' and 'Eff' will update at the rate of 1 second.

  The question is, is "continuous" averaging? In the sense that if I was doing 'good' low-pass filtering (on average is just the same as the low-pass filtering) - say simple TREE with notches n - to the DSP, then the output of the filter would be updated at the same speed as data entry; That is to say. taps would be 'move along' the input data at the same rate as the input data passes through the filter. I'm guessing based on my above explanation that's not what's happening. Instead, the VI DC/RMS is on average an entire block of 1000 samples and then 'jump' 1000 samples along and doing the next block.

  This is not necessarily a problem, but it is not not true low-pass filtering and I can image some scenarios where there might be artifacts because the moyenneur filter jump 1000 samples whenever it takes on average. I assumed that the only solution is to implement filtering in a loop of much higher speed and this could prove problematic in the higher frequencies of sampling.

  Anyone got any ideas on that? I worry about anything?

  Dave

  Hi Dave,.

  The 'average base DC - RMS' feature is designed to work only with continuous acquisitions, it will lift a warning is the signal is not continuous. When you open the function and examine the code in the function there is a Subvi with status information, which permits the function to continue the average of the previous data block.

  For this reason, we provide a reset terminal if you need 'forget' the previous calculations.

  Much of this is discussed in the detailed help on function, but still sometimes there hands dirty to know how the code works and review the code.

  Concerning
  JamesC
  NIUK and Ireland

• Cannot send emails with photo attachments using the Hotmail account.

  Original title: Hotmail account

  I can't send emails with photo attachments, why? I can send emails without a photo accessory.

  Thank you.

  Hi Keith,

  1 are you facing the issue only when you use the Mail application to send photo attachments?

  2. the problem occurs with all the accessories of the photo?

  3. is this problem only happens with Hotmail account?

  4. you receive messages or error codes?

  5 did you a recent software or changes to the material on the computer?

  This problem can occur if the account is not properly synchronized with Mail app or due to problems with the file format of the attachment of the photo you want to send.

  Method 1:

  You can try the steps to run the troubleshooter of app, synchronize licenses, update the Windows store, and also check for Windows updates.

  What to do if you have problems with a soft

  Note: The above article contains steps to change Windows Firewall settings. Make sure that the Windows Firewall is enabled after checking the issue.

  Method 2:

  If you have installed a third-party security software, you can temporarily disable third-party security software and firewalls installed on the system and check if you can send.

  Note: Be sure to enable the security software on the computer after checking the issue.

  You can also check if you can send the photo attachment using Hotmail like webmail account.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

  I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

  Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

  Thanks in advance for your suggestions on how to correct the problem.

  Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.

• Some problems with Toshiba 40LV933G using the Serbian language settings

  Hello

  I have Toshiba 40LV933g TV a few months already.
  The firmware version is finally a 1.00.08.
  And I have some problems with it, which I think can be corrected in some of the new firmwares (if there is one).

  First of all, when I select Serbian language 'Move' in media player is not translated.

  Secondly when I select the Serbian country in the menu I can't automatically scan for DTV and ATV ATV just of channels.

  Third and the greatest problem is medial Player do not support these last Serbian latin in subbtitles as:? šŠ?? žŽ
  and there is no possibility of changing the size of this last subbtitle. Things like this other brands are already supported.
  * also the time between changing channels is long enough *.

  Best regards.

  I noticed the same problem with subtitle on my TV Toshi when I use the media player (movie recorded on USB key). These Latin letters are not displayed correctly.

  I also hope that this can be corrected with new firmware.

  By the way: do you know where you can download the latest version of the firmware?

• Windows 8.1 with Bootcamp installed in El Capitan. Do not delete with Bootcamp so I used the disk utility. Now, Windows always tries to start with an error, the 'other' space illustrates.

  Long story short, I installed windows 8.1 using Bootcamp, went very well. I was just curious how it would go.

  in any case, tonight, I decided to delete the Windows partition (Bootcamp Partition), and I got an error in Bootcamp that says "sorry couldn't do Mac OS partition a new»

  With that I went to the disk utility and tried to partition the disk on a partition again, which it did, but now I have 40 GB of "other space". I literally have nothing stored on this computer, until I installed Windows 8.1 which was not there.

  Also, when I start it up I always get Windows start first if I do not hold Option, then it goes to the blue screen, obviously because he's not here.

  I started to recover, tried to fix it, verify, erase free space, etc.. I'm running a MacBook Pro 13 "128GB 2015.

  On a Mac of 2015, the disc is divided into a group of logical volumes and Volume for OS X, and a partition for Windows. If BCA fails to restore it correctly, the part of Windows do not get properly gathered in the LVG/LV. The other questions you have, it's that there are remnants of the Microsoft your EFI partition Boot code.

  To solve both, the easiest and safest method is

  1 backup OSX and all of your files - use Time Machine to back up or restore your Mac - Apple Support .

  2. boot into Internet recovery (CMD + Opt + R) - OS X: on OS X Recovery - Apple Support .

  3. click on Utilties-> disk utility and erase your entire internal drive.

  4. restoration of OSX and your files - use Time Machine to back up or restore your Mac - Apple Support .

  This requires another external drive that can accommodate TM backup - backup disks that you can use with Time Machine - Apple Support .

• Why I can boot into safe mode with internet connection, use the operating system, etc., but can not open a normal session without password administrator; who got the disabled.

  OEM Vista Home Premium. Normal startup does not recognize the password. When you click User icon it says: "your account has been disabled. Please, see your system administrator"I looked in the mirror, but it did not help. Booted, press F8, went in safe mode with network connection. Everything seemed to be there. Surf the internet and then started to ask me why I don't have a password here when I did normal start-up. What is the password? Check "Microsoft Answers", but what I came out which was, I need to reinstall the OS, which I can't do it without a drive anyway.  I thought that I've used it before, I knew the password. This computer has been recently "reinstalled" internal folder 'restore '. Something must happen. A unknown password can be removed from safe mode? Ultimately how reinstall you a clean Vista when all you have is the key to product and no local or OEM support? What would be the difference between a password reset disk and the OS disk.  The two would probably be stored side by side. Not to mention that most of us Dummies want to just surf to buy, and if we can not surf, we cannot buy. Dummies help us get back on the internet, Microsoft. At least take care of this shot.

  Hi PAM,.

  In Safe Mode, try to activate the high administrator account http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/.  Then log in using account and use it to solve problems with your normal administrator account login via control panel / user accounts / manage other accounts.  Find the one you want and make the appropriate changes to fix it.  If you can't, then you need to address as a corrupt account by using the following procedure:

  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If this is the only available administrator profile (you must be an administrator to solve this problem), activate the hidden administrator account (HAA) (i.e. what you did above, or you can do this by using these instructions instead: http://www.computerworld.com/s/article/9001970/How_to_access_the_true_Administrator_account_in_Windows_Vista?taxonomyId=17&pageNumber=1.)

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  The fact that it says it is disabled gives me to think that you can use the guest or built-in Administrator account already (as normally, you cannot disable an account, but you can with these two which cannot be deleted and only disabled).

  The password reset disk is only good if created before that you need and only to restore a password, do not to activate a disabled account.  Another thing that goes beyond passwords here.

  A recovery disk allows you to do some advanced options of recovery by booting the disk, but it will help you restore the operating system (or help you with this problem either).

  An Installation of Vista genuinve disc (the operating system drive as you seem to be describing) is a disk that contains the operating system.  That, if it is the original disc supplied with the system and is exactly the same as the product OEM key that you must allow you to do a clean OS install (although I would be first backup you'll pretty much lost everything in the process).  The following should help: http://www.vistax64.com/tutorials/117366-clean-install-full-version-vista.html.

  If you have a factory Conditions or a recovery Partition restore disk, then these are alternatives to a clean install if you don't have this disc.  But the procedure varies according to the manufacturer, make and model of PC.  Most of the manufacturers will allow you to buy these records of restoration (for a fee) If you cannot do it with a recovery Partition cannot create diskettes from the recovery Partition or have no other option.  Visit the support site of the computer for information on this topic, available options, and related costs.

  If you cannot enable the built-in Administrator account and cannot access the system in normal mode with this or another administrator account, then I'm afraid a clean install or restore to factory conditions is your only option.

  I hope this helps.

  Good luck!

• Error with Service Agreement using the Siebel EAI adapter

  Hi all

  Thanks in advance.

  I am facing following error with Service Agreement using Siebel EAI transaction.

  Error service call "adapter of Siebel EAI', 'Upsert' method in 'Contract Upsert' step. (SBL-RPR-00162) - method 'AssocCurrentRow' of the business component "Internal Division" (integration component "Agreement_Organization Service") for recording with search specification ' [name] = "ABC we ' ' returned the following error:"the selected record has been deleted by another user since it was recovered.  Please continue. (SBL-DAT-00494) "(SBL-EAI-04451)"

  Previously, we used to create agreements with sync transaction EAI with ID "User1" that has "ABC we ' as an organization. Now, we moved the EAI Async transaction. Even if we use "User1" to trigger transaction because it is asynchronous recording of the agreement is created using SADMIN user who has a different organization. To set the good organization, we have added the IC of the IO organization and the sending of the Organization as "ABC we.

  I guess, at the time of the transaction, the Organization "ABC we ' which is defined using IC is removed as siebel tries to define the Organization agree with the SADMIN organization.

  Please help me solve this problem.

  Kind regards

  Vincent

  Hello

  Please consult the following

  Get the error of SBL-DAT-00494 with an organization (Doc ID 2053260.1)

  SBL-DAT-00500 SBL - EAI - 04451 when there is 10000 or more records using the Web Service based on the Siebel EAI or EAI UI (Doc ID 979262.1) adapter

• transfer with catalog will use the same file name

  Hello everyone, I evaluate the cloud of Lightroom version. I have a MacBook that I use on a trip to import and did a first job on my photos, so I have a home NAS at home where store pictures and do most of the work.

  I want to transfer RAW files, but all the work with the MacBook on the NAS, I tried to use "export as catalog" and then "import a catalog" with options to move the files, it works but it keep the old file name and it does not put them in a folder with a different name. For example, if on my Mac, I work with a folder named '2015' and then transfer into a folder with the same name on the NAS Server everything works fine, but if I made a folder called 'photos' to work on the MacBook, and then I want to transfer everything on my NAS under the folder "Hawaii", everything is put under Hawaii\photos\ instead of Hawaii\

  I'm having a hard time understand what you did. But the best thing to do would be to highlight all the images in the Hawaii\photos folder and drag them to the folder of Hawaii. You can simply delete the folder of pictures and everything should happen as you wish. Do all the going in Lightroom and it should be simple and quick.

• Impossible to connect to vCenter Server 5.5 using the vSphere Client

  Hello

  
  

  I'm trying to configure VMware Lab home using the link below and I have reached a stage where I need to connect to vCenter Server using the vSphere client.

  
  http://boerlowie.WordPress.com/2011/12/13/building-the-ultimate-vSphere-lab-part-9-ESXi/

  
  

  I installed the package of 5.5 full vCenter server using the simple installation option and it includes vCenter server, single sign - on, Webclient vSphere, vCenter server and vCenter Server inventory service. All the the latter is installed on a virtual machine that is running Windows server 2008 R2 guest OS.

  
  

  Whenever I try to open a session on the vCenter Server uses the vSphere client, one of the following error is displayed.

  
  

  1. you do not have the permissions to connect to the server 'vCenter server IP address.

  2. cannot complete the connection incorrect username or password-, this error is visible when I do not specify domain\username domain user name and simply enter the user name.

  
  

  For the details of the error, please see the screenshots - vSphere_client_1, vSphere_client_2 and vSphere_client_3.

  
  

  As suggested in the link below, I tried to create an SPN and then set the SPN (Principal of Service name) and the UPN (User Principal name) in the Active Directory identity Source using the web of vSphere client (please see screenshot vSphere_Webclient_2)

  
  

  http://vinfrastructure.it/2014/01/issue-in-logging-into-vCenter-server-using-Windows-ad-credentials/

  
  

  To fix the permission error, I tried to add the domain user to the Administrators group on the server vCenter (see screenshot vSphere_Webclient_1).

  
  

  However, none of the above-mentioned resolution has worked.

  
  

  So can someone please help? I am stuck because of this problem and badly need help to move forward.

  
  

  Thank you

  AJMAL
  

  Able to connect to the vSphere Client do you use the [email protected] account?

  Have you already set up permissions on the server vCenter object?

  André

• Problems with signature while using the Application Builder

  So, I just went to create my application with applicationbuilder3.0 and I got this error. Anyone see this before? I went through the creation of p12s and files certificates and provisions three times now and it still does not work. I use the same e-mail address for all - so I have no idea how it would not match. Thanks in advance for any help!

  

  There is something wrong with your provisioning profile. Remove all the p12 and provisioning of the files that you have done as an attempt to get this working and then follow the steps in our guide publishing, starting on page 17, exactly: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf.

  Neil

• How to cut a line with a rectangle using the Pathfinder

  I'm a complete newb in artificial intelligence (several years in Ps).

  I'm trying to cut (delete) a rectangular section of a grid which consists of several lines. I get the message, "the filter yielded no results. Please select two paths that intersect. »

  In its simplest form, I have a line of path (a path) and a rectangle filled (also a path). The rectangle is on top of the line.

  

  I select both objects and choose less first plan in the Pathfinder palette.

  

  And I get the message "the filter yielded no results. Please select two paths that intersect. "I tried all the options in the pane of Pathfinder.

  I want to do is to have the section of the line which is covered by the deleted rectangle, so I'd end up with two lines that looked like this:

  

  If the rectangle overlapped the end of the line, I would that the section where they overlap deleted, and I'd end up with a single line.

  I'm sure I'm doing something wrong, but I have watched several videos on the Pathfinder, read a bunch of posts, and I'm still distraught.

  Thank you!

  It is not practical to change the lines into thin rectangles or cleck on each other by using the form builder.

  you don't have click on all of them, select your lines + the rectangle and Alt + click - drag the rectangle (from top down in your example) and everything will be gone at once.

• Help with a sql using the ASCII value

  Hello
  
  I have a table with the following data

  DOC_NO     CLIENT_REV
  ------     ----------
  240          A
  240          B
  240          B
  240          C
  240          C
  240          C
  240          0
  240          1
  240          1
  240          1
  240          2
  240          2
  240          2
  241          A
  241          A
  241          B
  241          C
  241          C
  241          D

  The requirement is retur the following values:

  240          2
  241          D

  I tried with the ASCII function, but the necessary result is somewhat complicated. That is to say for a group of doc_no I need as many client_rev if there are numbers, if not then I need the largest letter.
  
  How can I achieve this requirement?
  
  Kind regards.

  Hello

  What do you mean by "the decision must be the minor doc_date?
  It would be useful that you posted your desired results.
  I assume you mean you want only the line with the doc_date lowest (for each doc_no).
  in other words, the desired results are:

      DOC_NO L DOC_DESC           DOC_DATE
  ---------- - ------------------ ---------
         240 2 Description of 240 01-JAN-09
         241 D Description of 241 01-FEB-09
  

  Here's a way to get these results:

    SELECT x.doc_no, x.last_client_rev, y.doc_desc, y.doc_date
    FROM     (     -- Begin sub-query based on table_a
       SELECT   doc_no,
                   MAX (client_rev) KEEP
                     (DENSE_RANK LAST ORDER BY TRANSLATE(client_rev
                                                         ,'ABCD012' -- Desired sort order
                                                         ,'012ABCD'  -- Actual sort order
                                                        )) AS last_client_rev
       FROM       table_a
          GROUP BY  doc_no
       ) x,
       (     -- Begin sub-query based on table_b
       SELECT       doc_no,
              MAX (doc_desc) KEEP (DENSE_RANK FIRST ORDER BY doc_date)
                           AS doc_desc,
              MIN (doc_date)     AS doc_date
       FROM       table_b
       GROUP BY  doc_no
       ) y
    WHERE x.doc_no = y.doc_no;
  

  As you restrict the table_a lines are used, so now you restrict table_b lines are used.

  First, let's review what you do with table_a.
  Table_a has multiple lines with the same doc_no.
  You only want to consider one of these lines: one that comes last, when to sort your particular way.
  If your main query does not use the table_a:
  It uses a subquery table_a-based which is a GROUP BY doc_no, to ensure that only the row by doc_no is used.

  Now, what is the problem with table_b?
  Table_b has as many rows with the same doc_no.
  You only want to consider one of these lines: the one with the lowest doc_date.
  So your main query should not use table_b:
  She must use a subquery table_b-based which is a GROUP BY doc_no, to ensure that only the row by doc_no is used.