Impossible to update my HP nc6120 drivers in Windows 7

Similar Questions

• Impossible to update iTunes 12.4.1 on Windows 10 Home (64-bit)

  Hello, I use a Dell Inspiron with Windows 10 Home (64-bit) desktop computer and can't update iTunes to version 12.4.1.  After I check the box of iTunes to install the new version, I get an error message stating:

  Errors occurred during the installation of the updates. If the problem persists, choose Tools > download only and try to install manually.

  Update Software Apple (ASU) reopens and looking for new software.  A when you're finished, I check iTunes 12.4.1 and click Tools > download only.

  USS tries to download the update, but the following error message: "iTunes" has an invalid signature. The download has been removed.

  Any help that you could provide to resolve this would be greatly appreciated.

  Thank you

  MB

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Impossible to update the drivers in a new administrative profile

  I have somehow deleted my admin profile... I tried to create another profile with admin permissions and now impossible to update my drivers... Help, please

  Hello

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite A200-1fl - Impossible to update the drivers from ATI

  Hello!

  I have a Toshiba A200-1fl, two days ago I installed Windows 7 64-bit. Just after the installation of Windows has installed the drivers for ATI Mobility Radeon HD2400 (but the version (Microsoft WDDM 1.1), after Windows update installed on 18/08/2009 (former) ATI version.

  So, I went to the ATI Web page, I downloaded the latest catalyst suite, but it did not work "Problem with your software/hardware" (were the drivers for Windows 7-64), reflection, is that in the page Web of ATI says:

  + "The following are not supported in this version: +"
  + Computers laptop Toshiba (Please check with your notebook OEM for support of the drivers for these notebooks) +.
  + Sony VAIO notebooks (Please check with your notebook OEM for support of the drivers for these notebooks) +.
  + Computers portable Panasonic (Please check with your mobile phone OEM for support of the drivers for these books) ' + '.

  So I went to the TOSHIBA Web page, but only the drivers for Windows 7-64 bits are very old (version 8.432).
  I tried to install go to device - display driver - update manager and put the name of the file in the folder ATI, but Microsoft says: this driver is already up to date.

  The only suite ATI that works is the 9.9, the rest install me just the Install Manager and some other components but not display/graph drivers.

  So what I need to do to update my drivers? Why can't those ATI?

  Thank you very much!

  Windows 7-64, Ati Radeon HD2400, 2 GB of RAM responsibility.

  Hello

  You should only use the pre-tested driver Toshiba because they are changed from the original with protection against overheating. If you try to install these drivers, they can damage your graphics card. I remember, there was a user playing with drivers such as lead to damage of the graphics card.

• Impossible to update video driver on Satellite L675

  Hi all!

  I have the problem, I bought 675 as for 1099 7 months ago. Since it was the portable games 'up' and as time passes, I updated my Bios. Since everything goes wrong and I've updated my Bios as half year, after 1 month ago when I bought the laptop.

  As I sayed, as last time I start as arrowheads shift if I watch videos, play games, music of lisening.
  He put like noise frezze, as pc frezes for 2 sec and squiks really boring.

  Don't know how to fix.
  I guess its problem of processor i5 or cuz bios.

  Then when I tried to display updated my driver, there is no way to freaking updated its just impossible mission.

  Toshiba care a little to make updating drivers for the customer even though I tried to download it from the official site of AMD.

  It is said to be impossible to update driver since it is not supported and it said that I'm going for new drivers toshiba site and there is no new drivers for my pc.

  So I stuck and new games need new drivers like few games don't wana start because I not updated my drivers.
  Its ridiculous.

  I hope that you will be able to help me with my drivers up-to-date. If it is not... Well, altest I know not why not to buy an another toshiba laptop if they don't care about costume designers.

  Thanks and sry for my bad English.

  0101 - operating system: Windows 7 Home Premium 32 - bit (6.1, Build 7600) (7600.win7_gdr.120305 - 1504)
  0102 - language: Slovenian (regional setting: Slovenian)
  0103 BIOS: InsydeH2O Version 2.40
  0104 - processor: Intel (r) Core i5 CPU M 460 @ 2.53 GHz (4 CPUs), ~2.5GHz
  0105 memory: 4096 MB RAM
  0106 available OS memory: 3958 MB of RAM
  0107 - Page file: 2612 MB used, 5301 MB of available space
  0108 Windows Dir: C:\Windows
  0109 DirectX Version: DirectX 11
  0110 - DX setup parameters: not found
  0111 - DPI setting: using System DPI
  0112 - system DPI setting: 96 DPI (100%)
  0113 - DWM DPI Scaling: disabled
  0114 DxDiag Version: 6.01.7600.16385

  --------------------------------------------------------------------------------
  02 - processor

  --------------------------------------------------------------------------------

  0201 legend: Intel (r) Core i5 CPU M 460 @ 2.53 GHz x 4 ~ 2534 MHz
  0202 CurrentClockSpeed: 1190 MHz
  0203 L3 Cache: 3,00 MB
  0204 L1 Cache: 32,00 KB
  0205 L2 Cache: 256,00 KB

  --------------------------------------------------------------------------------
  03. video adapter

  --------------------------------------------------------------------------------

  0301 - card Name: ATI Mobility Radeon HD 5650
  0302 manufacturer: ATI Technologies Inc.
  0303 - Type chip: ATI (0x68C1) graphics card
  0304 DAC Type: internal DAC (400 MHz)
  0305 key: Enum\PCI\VEN_1002 & DEV_68C1 & SUBSYS_FD121179 & REV_00
  0306 - display memory: 2737 MB
  0307 AdapterRAM: 1.00 GB

  The only thing I think is to find more recent drivers of other computers portable satellite with similar graphics card.

  I searched a bit and find [these | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp].

  Select the satellite C series:

  C660
  Display driver
  ATI
  Windows 7-32 Bit
  8.783.3

  C850
  05/10/12
  Display driver
  AMD
  Windows 7-32 Bit
  8.932.5.3

  You can also try to download the 64-bit drivers. It is possible that they include 32-bit as well.

  C670D
  Display driver
  ATI
  Windows 7-64 bit
  8.812.2.2

  Satellite L series:

  L750D
  Display driver
  AMD
  Windows 7-64 bit
  8.911.6

  It's a longshot, but you can try.

• Impossible to update itunes in win 10

  Impossible to update iTunes in win 10

  Search in all Apple Software Update applications and open it. He checks the updates all Apple software on your pc Windows 10 HP.

• Windows restart as soon as try to update drivers in windows on mac pro Book 10

  Hello

  After so much hassle to install windows on my mac 10, some of the features such as graphic and sound card do not work, I try to install the driver using bootcamp, however, they are not compatible with windows 10, and then I try to download driver manufacturers, such as the intel and amd, however, as soon as I try to update the driver windows will restart. does anyone have a solution?

  You have an identical question in windows restart as soon as try to update the drivers in windows 10 mac pro book .

  What is the model of the year of your Mac?

• IMPOSSIBLE TO UPDATE ALL APS, CONTINUES TO RECEIVE YOUR COMPENSATION ACCOUNT PAL IS NO LONGER VALID, GO TO THE ITUNES STORE ETC., WHICH I DID SEVERAL TIMES GRRRRRRRRRR 50MINUTES W APPLE ADVISOR - IT HAS JUST FACT, BUT LOSE THE SETTINGS ETC. ??

  IMPOSSIBLE TO UPDATE ALL APS, CONTINUES TO RECEIVE YOUR PAY PAL ACCOUNT IS NO LONGER VALID, GO TO THE ITUNES STORE ETC, WHAT I'VE DONE SO MANY TIMES

  50MINUTES W APPLE ADVISOR - SHE HASN'T DONE, BUT LOSE SOME SETTINGS ETC. ??

  PayPal requires that a credit card account is valid.

  Payment methods, you can use in the iTunes Store, App Store and iBooks Store - Apple Support

• Impossible to update 10.11.5 download stops about 100 MB download!

  

  Impossible to update 10.11.5

  It stops at about 100 MB to download!

  Repair the disk for El Capitan

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select layouts withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

  
  

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start the computer in Safe Mode , and then restart normally. It will be slower that a normal restart, so be patient.

  Download OS X El Capitan 10.11.5 Combo Update and install it.

• Impossible to update the BIOS on Equium L350

  I tried updating the BIOS on my laptop but when I run the update I get the message "the ROM file is not newer than the BIOS. I've updated all the others drivers drivers optical drive, when I run the update to do this I get the messagae that they are not compatible, even if I download the correct one for my model.

  Any ideas please?

  Sorry my friend, but I do not understand what you want to hear now. It seems that you are a fanatic of the update ;) Just a joke!

  As you can see it the downloaded version of BIOS is not an end of history was updated.
  Driver optical drive? Can you please tell me what it is? What is the name and version of the file that you want to install?

• I don' t have drivers from windows update to my Webcam Compaq CPQ74CAM

  I don' t have drivers from windows update to my Webcam Compaq CPQ74CAM

  True salvation,

  Please contact the technical support of Compaq http://www8.hp.com/us/en/support-drivers.html or get more help, more support options there.

  Good luck!

  Kosh

• Why my executables LabVIEW losing features GPIB after update to 488,2 drivers

  A year ago on a remote test unit, I had put in place for a production line, a worker had decided to launch National Service update of the Instruments on the test PC and update all available programs. After this update, none of the GPIB functions worked on test executable for the test of LabVIEW software. After the execution of Automation Explorer, I was able to confirm that all of the GPIB instruments were still present, operation and alias still correct. The only way I could solve this problem was by erasing all National Instruments software and put it back into place, again.

  Yesterday on a local test machine is the same thing. This time 488.2 full driver package has been installed from a USB stick to update the 488,2 drivers on the machine and subsequently, none of the GPIB functions worked, causing all LabVIEW test executables to lock up. Once again, Automation Explorer shows that the GPIB instruments are installed and functioning and all aliases are always accurate. I erased all the software of NOR and reinstalled but now I stil can't get LabVIEW programs to work properly.

  Someone at - it of another expereinced this problem?

  What is the solution?

  After thinking the problem to the remote installation, it appeared that after a year of operation, the problem occurred after update 488,2 pilots to the new version 14.0

  The cure is to install the drivers of v3.1.2 previous back on the system.

  I uninstalled all the software version 14 of OR out of my test PC set-up and installed the package v3.1.2 OR-488. 2 and all the executables started working again.

  The Readme for VISA DURATION v14.0 says is comaptible with LabVIEW versions 2011-2014, but apparently there is a problem at least 2013 that touched me.

• Impossible to update of Windows Media Player and Microsoft Security Essentials and the error is "access denied error 80070005."

  Apparently an involuntary change of administrative privileges or permissions (Windows XP Pro, SP3) keeps me updated Media Player version 9 to 11 v. and updated virus Security Essentials definitions.
  For Media Player, wmsetup.log reports access denied error 80070005 and UpdSpAPI.log reports access denied for the HKLM\SOFTWARE\Microsoft\MediaPlayer\Settings\MP3Encoding\LowRate registry key. In regedt32, I'm blocked from display HKLM\...\MediaPlayer\Settings and below, and "are allowed to view the current permission settings, but... can make a change." Except that I can't. I can enter the change but get «...» Access is denied"trying to apply them. So this is the first problem that I need help.
  But of course it's more than a registry key and the subkeys, because MSE too is affected and will download but not install virus definitions. WindowsUpdate.log reports: failed to install with error 80070643.
  My user account (it's the only one!) is part of the Administrators group and all that I tried to verify administrative permissions is positive. This is a new issue. No virus/malware, according to MSE, Lavasoft Ad-Aware, MalWarebytes Anti-Malware.
   
  Original title: cannot update Media Player or Microsoft Security Essentials - access denied Erors

  Hello

  Question: Impossible to update Windows Media Player

  Run the Fixit and see if it helps.

  Difficulty video Windows Media Player and other media or from library (Fixit)

  Problem: cannot install Microsoft Security Essentials

  Perform the steps from the link below and see if it helps.

  I can't install Microsoft Security Essentials

  Hope this information helps.

• I had the virus "XP Antivirus 2012" and now impossible to update MSE

  I had the virus "XP Antivirus 2012" and now impossible to update MSE.  Yesterday, I downloaded the Scanner of MS on another computer and transferred to the computer infected in safe mode and ran the Scanner from Ms.  Fortunately, it removed the virus, but this morning I started the computer and check the updates on MSE, but he would not check.  A window titled "Microsoft Security Essentials" read, "Security Essentials could not check the updates antivirus and antispyware due to internet or network connectivity problem."  He was also the error code: 0 x 80248014.

  Can my firewall Windows or Security Center maintain MSE? Or should I do something else?

  Probably a corrupted Winsock, try running the Fixit 50203 (scroll down page)

  http://support.Microsoft.com/kb/811259

  If it is impossible to access the Fixit on your own computer try dl on another computer as you did with the Safety Scanner.

  Have you tried the bleepingcomputer.com removal guide / http://www.bleepingcomputer.com/virus-removal/remove-xp-antispyware-2012 (again may require the use of another computer in mode minimum to dl and file transfer)

  Since you use MSE, have tried the Safety Scanner but still have problems consider contacting support.

  Start here - https://support.microsoftsecurityessentials.com/

  and select the link that says - I think my computer is infected. Options vary from
  region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/)
  in the United States at this time. After an initial free consultation, a fee will be charged for
  assistance, based on the details of the case.

  Furthermore, depending on your level of experience and comfort using 3rd party repair tools, check the following:

  Repair Windows Tweaking.com
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html

  5.2.2 D7
  http://MajorGeeks.com/D7_d6954.html

  For others * old school * correct and applicable to the see below XP tweaks.

  Kelly Korner
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Doug Windows Tweaks and tips
  http://www.dougknox.com/

  I hope this helps.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For more information and help on how to protect you and your computer, I refer you to the following:

  Safety & Security Center
  http://www.Microsoft.com/security/default.aspx

  Virus and Security Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  Malware Protection Center
  http://www.Microsoft.com/security/portal/default.aspx

  Malware encyclopedia-search for malware names
  http://www.Microsoft.com/security/portal/threat/threats.aspx?ID=1

  Don't let the bad bits byte.

• How do I go about obtaining drivers for Windows 7 if I update to Windows XP?

  If I update to windows 7 I have to shell out $ 60 as I did when I reinstalled Windows XP for drivers, so I can connect to the internet? If so is there a better way to go about installing the drivers? Keep it simple with me please, I don't know I have no I know as much about computers, because I think I do.

  original title: Xp to Question 7.

  Short answer... No, you will be always be sure to get the right drivers for Windows 7.

  Long answer...

  As you may know that a 'pilot' is a computer program that allows computer programs to interact with a hardware device.

  Device drivers are hardware-related and operating system specific.  What this means for you, is that you must have a driver for each hardware device on your computer AND each of these device drivers must be written for the operating system that you choose to use on your computer.

  Microsoft has been trying to collect and integrate device drivers in its Windows operating systems, but it does not - and really can't - incorporate a device driver for each possible piece of computers that someone could incorporate into a personal computer.  In addition, although some device drivers included with a particular version of Windows might be able to do a given device of the work, the built-in drivers could not do all the features of the available hardware device.

  For the reasons stated in the previous paragraph, when Windows is installed on a new computer (or re-installed following a disc format - the so-called 'clean install'), there are probably enough drivers added to the computer to the top and do work, but not all the features of the hardware will not work correctly and some peripheral hardware may not work at all.  Thus, whenever a Windows operating system is installed (if it is Windows XP or Windows 7), it is important to have in hand all necessary device drivers so that the computer can be used as intended.

  When you perform an installation of Windows, in general we might want to have on hand for the drivers for the motherboard (also called the chipset driver), video card, sound card and maybe cards NIC (including wifi network cards), as well as, of course, for devices such as printers, scanners, external modems, etc.

  If the computer is done by a 'direct' so-called OEM (brand computers are you'll probably recognize as Sony, Lenovo, Dell, HP, etc.), the computer manufacturer may have agreements with various manufacturers of components to provide custom device drivers.  This is particularly true for laptops.  For this reason, it is important to get the drivers for these computers to the web site of the manufacturer of the computer.  Fortunately, the manufacturer usually has a way to determine the specific hardware configuration to a specific computer (for example, Dell one uses ID he calls "Service Tag") and will be collected all the drivers for your computer in an easy to deal with the package.

  If you have a custom computer, you will need to determine the manufacturer and the model number of the motherboard, video card, sound card, and the NICs (especially wifi network cards), included in the computer and get Windows 7 drivers from the manufacturers of different components.

  See this article, especially the section "Download drivers"--> http://tweakhound.com/xp/installxp/installXP1.htm