Impossible to update the system registry. Please try Regedit

Similar Questions

• Impossible to update the system registry please try using regedit.

  I read in other forums where other prople are experiencing this problem, but the only difference is that I have one account on my computer and it is run as an administrator. Any suggestions in what I could do? Thanks in advance.

  Hello burton of the REALTOR.

  Thank you for visiting the Microsoft answers community.

  This problem is usually related to permissions.

  Take a look at this KB: http://support.microsoft.com/default.aspx/kb/255130

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm unable to open the photo files in Bridge. I use a pc and receive the following notice in Adobe Bridge "bridge met a mind is impossible to read the cache. Please try to purge the central cachepreferencestocorrect the situation. "I have purged the cache

  I can't open photos in Bridge.  On my pc, I got a message saying that the bridge could not read the cache and suggested I purge the cache in the preferences.  I did and now cannot open some files photo 270 000.  Can anyone help?

  Hi Elsa

  Please see Troubleshooting of errors, freezes | Adobe Bridge | Windows, Mac OS and purge the cache when you reset preferences.

  Or you can follow the steps below.

  Windows: -.

  • Navigate to C:\Users\Username\AppData\Roaming\Adobe\Bridge Cs6
  • Rename the folder Cache Cache.Old

  Let us know if this helps

  Concerning

  ~ Assani

• In e-mails AOL, verification of the individual messages in the results of regular system in this error message: there was an error while loading the message. Please try again later.

  In access to AOL e-mail via the full version, I can navigate my account (old messages, new messages, spam, etc.) very well, but when I try to open an individual email, I get this error message: "there was an error while loading the message. Please try again later. »

  This is identical to a problem someone else was described in another thread... Unfortunately, nothing suggested you him seemed to work. I have BEEN cheated at the opening of a file attached to an e-mail immediately before this started, so I think it's a virus or something. IN ANY CASE... I AM able to open the messages when I use the basic version of AOL. Initially, the problem seemed to be in Firefox, but I tried with Internet Explorer now also and it's the same thing, and the basic version is accessible while the full version is still blocked.

  On both browsers, after the error message, I can't even click on individual posts to TRY to open another, and there are a few not-very-right boxes and the x and the things that appear on the screen that do not belong.

  Please tell me that you can not do that, go away... I tried uninstalling and reinstalling... Firefox who did not. I also enjoy McAffee, and that has not changed anything.

  You can do a check of malware with several digitization programs of malicious software on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• I am trying to download the free trial for Mac, but it says that my system is no longer supported. Currently, my mac runs on 10.8.5 version but it seems impossible to update the mac. Someone knows how to fix this?

  I am trying to download the free trial for Mac, but it says that my system is no longer supported. Currently, my mac runs on 10.8.5 version but it seems impossible to update the mac. Someone knows how to fix this?

  Hi elizabethg,.

  Photoshop CC 2015 would require minimum Mac OS 10.9, therefor you can maximum download the trial version of Photoshop CC 2014 which is compatible with the version of Mac OS you have.

  Download link: direct download links of Adobe CC 2014: Creative Cloud 2014 Release. ProDesignTools

  We will also recommend you use Photoshop CS6 trial, because if in case you want to buy the trial then its available through the third party dealer as a standalone application.

  Download Creative Suite 6 applications

  Configuration of Photoshop

  Kind regards

  Mohit

• There was a problem with the current system. Please try again later. If the problem persists, contact customer service.

  There was a problem with the current system. Please try again later. If the problem persists, contact customer service.

  Why?

  Please tell us what Adobe application you are trying to download. Please try creative cloud install app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• the system registry file is missing or damaged

  When I try to load up vista premium 32 bit edition on my laptop, a screen will appear and say the system registry file is missing or damaged and the custom of vista so load up, I just need my pictures of my son on my hard drive, all the rest does not matter, I even tried to use one of these inclosures of hard drive to see if I can get the data on the hard drive on my other computer laptop but has not been successful, I just need to know how to recover the system registry file on.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  System Restore restores the registry among other things, and this should solve your problem.  You should probably use the facility or the recovery disc to access this feature.

  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (if necessary, you may need to do this drive on another PC / laptop).

  I hope this helps.

  Good Lluck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "

• On HP Pavilion laptop computer on Vista do "Windows failed to load because the system registry file is missing or damaged."

  I have a HP Pavilion laptop and I got this error message "windows does not have load because the system registry file is missing or damaged.  then he said that I could insert the windows installation disc, I did not.  Thank you.

  Original title: a registry file

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't work, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not solve your problem, it's the Information from HP to solve problems with their computers, including the reinstallation of the operating system by pressing F11 at startup.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#MicrosoftRestore

  For the HP Recovery Manager.

  The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:
  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  See you soon.

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to update the BIOS on Satellite A665

  Hello

  I desperately need help with update my BIOS on Satellite A665 that my battery won't charge and the site said to me updated the BIOS, but it is not letting me update battery is less than 10%.

  Please someone help me because I have no way to use the laptop without power still present.

  Hey Buddy,

  Can you charge the battery when the laptop is turned off? Usually battery LED should show you white and orange color to the loading process if the battery is fully charged. And then start the computer and update the BIOS.

  Try to update the BIOS on the pre-installed Windows version?

• Pavilion dm4: Windows 10 upgrade fails with the message error "we couldn't update the system reserved partition."

  Both HP and Microsoft indicate my laptop was ready for the upgrade to Windows 10, but when I tried to do the upgrade there not - several times - with the error message of Microsoft that "we could not update the system reserved partition."

  What should do?

  Other threads of error indicate the system reserved partition must be larger.  This partition is usually small.  Try making at least 400 MB instead of the 100 MB to 250 MB it is probably now.

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• Impossible to update for systems Win Vista x 64 base update KB968930 and KB982666

  Have a system Win Vista x 64 base. Am able to update most of the windows updates, but these two are a problem (KB982666 and Windows PowerShell 2.0 and Win RM KB968930 2.0 security update).  Anyone with the same system and the same problem, but found an answer?

  Hello

  ·         Were there any changes to the computer, lately?

  ·         What is the exact error code that you get when installing these two updates?

  To check the error code follow the below mentioned steps

  (a) open the Control Panel (all items view), and click the Windows Update icon.

  (b) click the view update history in the left pane.

  To view the details of an update of one-stop shops

  (a) select and right-click on a Windows Update list, and then click Details.

  (b) click on the link more information see more information about the Windows Update selected.

  I suggest you try the following steps know us if this helps

  Method 1: Perform a clean boot to verify if a third-party software or application is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2: Disable the security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Method 3: Download and install the update the system (CHEKSUR) tool:

  http://support.Microsoft.com/kb/947821

  In addition, try to install the stand-alone package of these two updates.