Impossible to update workstations by using WSUS

Similar Questions

• Impossible to update Windows XP using Auto-Update

  None of the updates downloaded by the Auto-Updater Windows XP SP3 install.  If I check the installer actively (by clicking on the yellow "shield of exclamation point" icon), I am advised that

  "The component you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder containing the installation package "xxx.msi", where xxx is the name of the installer.  By clicking on 'Browse' and then clicking MSI file in the Directory gives an error, claiming that this package is not in the right directory. If enough interest if poster in this issue, I can post a screenshot. Thank you.

  Try to reset the windows update components.

  http://support.Microsoft.com/kb/971058

  Good luck.

• Impossible to update virtual machines with WSUS

  Hi, (first timer so please, be gentle)

  We have deployed only a small number of virtual machines, which are built from the same model. When trying to deploy WSUS updates, a virtual machine appears and only for a few seconds at a time then randomly change to another virtual machine. Which allows us to push updates.

  I understand that the problem he pulled on the model to build, but is there anything else that we could rate?

  See you soon

  Hello

  I had this problem some time, and it wasn't the SID of the OS but the ID of the WSUS client.  This can be regenerated on each client by following these steps:

  a. run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate
  b. remove the PingID SUSClientID and AccountDomainSID values
  c. stop and start the Service Wuauserv
  d. from the command prompt run: wuauclt /resetauthorization /detectnow

  Once this done, clients should begin to appear in the WSUS = console)

  Hope this helps

  Adam

• Impossible to update the attributes using the modifyuser IDXML

  Hello
  
  I'm updating the attributes by using change user IDXML.
  
  Here are the values that I'm passing to the web service:
  
  GAtt OAMModify.GenericAttribute = new OAMModify.GenericAttribute ();
  
  gAtt.AttrName = 'Description ';
  String [] gattvalue = new string [1];
  gattvalue [0] = 'TEST ';
  gAtt.AttrNewValue = gattvalue;
  gAtt.AttrOperation = "REPLACE_ALL;
  attr. GenericAttribute = new OAMModify.GenericAttribute [] {gAtt};
  
  If I try to update to attribute Title everything works fine, but if I try to change the Description or any custom attribute, I get the following error.
  
  Invalid name for the attribute Description
  
  I have been unable to isolate the problem with the description attribute, any help, why it is happening?
  
  Thank you
  
  Riou

  Hey riri,.

  You do this in the application identity system, tab of Configuration of User Manager Console and select "Tabs" in the left menu.

  Kind regards
  Colin

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• Problems of SBS 2011 Windows Update after you uninstall WSUS

  I have a Server SBS 2011 I uninstalled WSUS on.  Due to the usual problem of disk space on the server.  I uninstalled WSUS because I don't mind the jobs goes directly to Microsoft Update on the Internet.  But after uninstalling WSUS on the server, workstations stop download of updates completely.  It indicates that Windows updates are controlled by the administrator.  I can check the updates manually by selecting "Check for updates on the Internet".  How can I get the workstations to download updates normally by using the web site of Microsoft Updates?  Thank you!

  Hello

  I suggest you re-post your query on the TechNet forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• IMPOSSIBLE TO UPDATE ALL APS, CONTINUES TO RECEIVE YOUR COMPENSATION ACCOUNT PAL IS NO LONGER VALID, GO TO THE ITUNES STORE ETC., WHICH I DID SEVERAL TIMES GRRRRRRRRRR 50MINUTES W APPLE ADVISOR - IT HAS JUST FACT, BUT LOSE THE SETTINGS ETC. ??

  IMPOSSIBLE TO UPDATE ALL APS, CONTINUES TO RECEIVE YOUR PAY PAL ACCOUNT IS NO LONGER VALID, GO TO THE ITUNES STORE ETC, WHAT I'VE DONE SO MANY TIMES

  50MINUTES W APPLE ADVISOR - SHE HASN'T DONE, BUT LOSE SOME SETTINGS ETC. ??

  PayPal requires that a credit card account is valid.

  Payment methods, you can use in the iTunes Store, App Store and iBooks Store - Apple Support

• Impossible to update 10.11.5 download stops about 100 MB download!

  

  Impossible to update 10.11.5

  It stops at about 100 MB to download!

  Repair the disk for El Capitan

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select layouts withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

  
  

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start the computer in Safe Mode , and then restart normally. It will be slower that a normal restart, so be patient.

  Download OS X El Capitan 10.11.5 Combo Update and install it.

• Impossible to update video driver on Satellite L675

  Hi all!

  I have the problem, I bought 675 as for 1099 7 months ago. Since it was the portable games 'up' and as time passes, I updated my Bios. Since everything goes wrong and I've updated my Bios as half year, after 1 month ago when I bought the laptop.

  As I sayed, as last time I start as arrowheads shift if I watch videos, play games, music of lisening.
  He put like noise frezze, as pc frezes for 2 sec and squiks really boring.

  Don't know how to fix.
  I guess its problem of processor i5 or cuz bios.

  Then when I tried to display updated my driver, there is no way to freaking updated its just impossible mission.

  Toshiba care a little to make updating drivers for the customer even though I tried to download it from the official site of AMD.

  It is said to be impossible to update driver since it is not supported and it said that I'm going for new drivers toshiba site and there is no new drivers for my pc.

  So I stuck and new games need new drivers like few games don't wana start because I not updated my drivers.
  Its ridiculous.

  I hope that you will be able to help me with my drivers up-to-date. If it is not... Well, altest I know not why not to buy an another toshiba laptop if they don't care about costume designers.

  Thanks and sry for my bad English.

  0101 - operating system: Windows 7 Home Premium 32 - bit (6.1, Build 7600) (7600.win7_gdr.120305 - 1504)
  0102 - language: Slovenian (regional setting: Slovenian)
  0103 BIOS: InsydeH2O Version 2.40
  0104 - processor: Intel (r) Core i5 CPU M 460 @ 2.53 GHz (4 CPUs), ~2.5GHz
  0105 memory: 4096 MB RAM
  0106 available OS memory: 3958 MB of RAM
  0107 - Page file: 2612 MB used, 5301 MB of available space
  0108 Windows Dir: C:\Windows
  0109 DirectX Version: DirectX 11
  0110 - DX setup parameters: not found
  0111 - DPI setting: using System DPI
  0112 - system DPI setting: 96 DPI (100%)
  0113 - DWM DPI Scaling: disabled
  0114 DxDiag Version: 6.01.7600.16385

  --------------------------------------------------------------------------------
  02 - processor

  --------------------------------------------------------------------------------

  0201 legend: Intel (r) Core i5 CPU M 460 @ 2.53 GHz x 4 ~ 2534 MHz
  0202 CurrentClockSpeed: 1190 MHz
  0203 L3 Cache: 3,00 MB
  0204 L1 Cache: 32,00 KB
  0205 L2 Cache: 256,00 KB

  --------------------------------------------------------------------------------
  03. video adapter

  --------------------------------------------------------------------------------

  0301 - card Name: ATI Mobility Radeon HD 5650
  0302 manufacturer: ATI Technologies Inc.
  0303 - Type chip: ATI (0x68C1) graphics card
  0304 DAC Type: internal DAC (400 MHz)
  0305 key: Enum\PCI\VEN_1002 & DEV_68C1 & SUBSYS_FD121179 & REV_00
  0306 - display memory: 2737 MB
  0307 AdapterRAM: 1.00 GB

  The only thing I think is to find more recent drivers of other computers portable satellite with similar graphics card.

  I searched a bit and find [these | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp].

  Select the satellite C series:

  C660
  Display driver
  ATI
  Windows 7-32 Bit
  8.783.3

  C850
  05/10/12
  Display driver
  AMD
  Windows 7-32 Bit
  8.932.5.3

  You can also try to download the 64-bit drivers. It is possible that they include 32-bit as well.

  C670D
  Display driver
  ATI
  Windows 7-64 bit
  8.812.2.2

  Satellite L series:

  L750D
  Display driver
  AMD
  Windows 7-64 bit
  8.911.6

  It's a longshot, but you can try.

• Automatically update the drivers via WSUS 3.0 SP1

  Posted November 16, 2010, 15:51

  Hello

  Recently at the company that I work we started pushing updates to the video card driver via WSUS. While users have no problems of installation, we had difficulty to automate the process. Basically, we have 7 computers that are run continuous tests that cannot be interrupted, except for 430 in the morning when they restart. We have a script that does the reset and we try to make these computers to install updates before restarting. I tried WuInstall, Remote X Reboot, this script:http://www.wsus.info...?showtopic=7298 and this: http://msdn.microsof...28VS.85%29.aspx where all work, ideal for installing Windows updates but none of them install updates of the driver as well! The updates appear as high priority and all other updates installed without problem, every single script/program that I use to try to automate the updates says "No update available" even if the Windows Update icon is still there. We tried this on Windows XP and Windows 7 computers and got the same result, we use WSUS SP1 on Server 2008. Any help/link to a program/script would be greatly appreciated.

  Thank you

  Please repost your request in the Forum of WSUS.  Thank you! Carey Frisch

• Impossible to update "site has encountered a problem and cannot display the page you are trying to show."

  When I try to update either using the can I Update or Microsoft Update I get the following message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "

  When I open Microsoft Security Essentials and click Update I get the following message: "the Virus and spyware definitions failed and an error code: 0 x 80070424 message.»

  I am unable to get the position of automatic updates to turn on. I followed a few threads that says run "services.msc" Background Intelligent Transfer Service is ongoing as is the workstation but automatic updates does not appear!

  I tried auto Fix It and automatic installation of updates, but still no luck.

  All the other programs on the seam of my computer for updated correctly. and seams of browser to work properly. I also tried dissabling my firewall and adding the site to my trusted sites update and that didn't work either.

  I'm on PC based on Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Build 2600 on a Toshiba X 86 vs

  Q: which antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?
  A: I do not uninstall [McAfee Security Center before] I installed MSE...

  See...

  Checklist for installation of Microsoft Security Essentials
      http://answers.Microsoft.com/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Should I have any other antivirus software and Microsoft Security Essentials?
      http://blogs.msdn.com/b/securitytipstalk/archive/2010/09/08/do-i-need-both-Microsoft-security-essentials-and-another-antivirus-software-program.aspx

  ======================================

  You could try the following:

  [You may want to print these instructions for reference offline. [If a step said to restart, restart!]

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  1B. download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall McAfee Security Center & reboot.

  4. make sure that the Windows Firewall is now enabled.

  5. If S * PERAntiSpyware is always installed, uninstall it and reboot again. If not go to # 6's.

  6. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  7. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the automated troubleshooter from end to end. [1]

  9 restart a last time & test. Make absolutely certain that you can update MSE manually using the update on the update tab button.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

• I had the virus "XP Antivirus 2012" and now impossible to update MSE

  I had the virus "XP Antivirus 2012" and now impossible to update MSE.  Yesterday, I downloaded the Scanner of MS on another computer and transferred to the computer infected in safe mode and ran the Scanner from Ms.  Fortunately, it removed the virus, but this morning I started the computer and check the updates on MSE, but he would not check.  A window titled "Microsoft Security Essentials" read, "Security Essentials could not check the updates antivirus and antispyware due to internet or network connectivity problem."  He was also the error code: 0 x 80248014.

  Can my firewall Windows or Security Center maintain MSE? Or should I do something else?

  Probably a corrupted Winsock, try running the Fixit 50203 (scroll down page)

  http://support.Microsoft.com/kb/811259

  If it is impossible to access the Fixit on your own computer try dl on another computer as you did with the Safety Scanner.

  Have you tried the bleepingcomputer.com removal guide / http://www.bleepingcomputer.com/virus-removal/remove-xp-antispyware-2012 (again may require the use of another computer in mode minimum to dl and file transfer)

  Since you use MSE, have tried the Safety Scanner but still have problems consider contacting support.

  Start here - https://support.microsoftsecurityessentials.com/

  and select the link that says - I think my computer is infected. Options vary from
  region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/)
  in the United States at this time. After an initial free consultation, a fee will be charged for
  assistance, based on the details of the case.

  Furthermore, depending on your level of experience and comfort using 3rd party repair tools, check the following:

  Repair Windows Tweaking.com
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html

  5.2.2 D7
  http://MajorGeeks.com/D7_d6954.html

  For others * old school * correct and applicable to the see below XP tweaks.

  Kelly Korner
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Doug Windows Tweaks and tips
  http://www.dougknox.com/

  I hope this helps.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For more information and help on how to protect you and your computer, I refer you to the following:

  Safety & Security Center
  http://www.Microsoft.com/security/default.aspx

  Virus and Security Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  Malware Protection Center
  http://www.Microsoft.com/security/portal/default.aspx

  Malware encyclopedia-search for malware names
  http://www.Microsoft.com/security/portal/threat/threats.aspx?ID=1

  Don't let the bad bits byte.

• Try to change my key for XP pro, receive the message error "Impossible to update can be due to connectivity problem'

  I have a valid key for xp pro. Using the key update tool gave me a message "Impossible to update can be due to connectivity problem"(?). Now I'm going in circles trying to find a "regional activation phone number" for Orange County, Ca.After 2 hours of trying, the closest I can get is worldwide volume licensing of phone numbers.

  Hi rexstricklin,

  In addition to the post of Carey, please see the following articles on how to change your activation key:

  http://support.Microsoft.com/kb/810892

  and how to enable XP:

  http://support.Microsoft.com/kb/307890

  I hope this helps!

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• Windows Update, error! Impossible to update. Code Code 8007045 D 80071 has 91

  Original title: Windows Update, error! Impossible to update.

  I have try the update to have a better PC but it won't allow me because of an error.

  There are 2 errors in fact, which are
  Code Code 8007045 D 80071 has 91
  All 23 updates have an error which are these codes. Help, please!

  I have a 32-bit and I have NO SERVICE PACK! This is the reason why Im trying to get the update!
  I also use Norton 360, the firewall is enabled.

  I have a Windows Vista Home Premium

  http://oi39.Tinypic.com/20qyo2d.jpg

  That link above is the number of KB of all the im trying to install updates.

  Hello

  1. What are the exact error messages?
  2 have you made changes on the computer before this problem?

  The following articles may be useful:
  Error message when you try to install a Windows Update, a hotfix or a service pack after completing the system restore in Windows Vista: "0x80071A91".
  http://support.Microsoft.com/kb/948252
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058