Impossible to use VMWare Server and Virtual PC at the same time?
I have a Win 7 box I use VirtualPC (unfortunately, VPN to the employer only supports the 32-bit Win XP).
If I try to start any virtual machines using VMWare Server, power on and then immediately off. Tried several different VMs.
However, if I disable VirtualPC, they all work normally.
Then... there at - it a known issue with the help of Virtual PC and VMWare Server at the same time?
BTW, I didn't see this problem when you use Virtual PC and VMWare Player at the same time.
VirtualPC leaves the CPU of the exploitation of VMX root, which is a restricted mode. VMware Server is problems to switch between legacy mode and long (this switch is prohibited when the CPU is in VMX root operation). The current versions of the workstation and the player are able to circumvent this restriction.
Tags: VMware
Similar Questions
-
Can I have VMWare Player and Virtual Box to the same PC?
Can I have VMWare Player and Virtual Box to the same PC?
Can perform the same two times?
Hello
Yes, that's correct.
--
Wil
-
Hi guys
I read the Vmware 5.5 replication, and it says what I do not understand.
I was reading the recovery process and he said:
You can recover a virtual machine at the same time on the site replicated on the incoming replication tab
what it means?
I restore a VM and I have to wait until he said recovered to start the recovery process or simply means that a single virtual computer at a time and no group of the virtual machine can be recovered I can begin the process of recovery in 3 VMs at the same time, but I have to go one
Thanks a lot guys
Hello
The second. You can begin the process of recovery for each virtual computer and they can go in parallel. However, there is no option to select more than one replication and begin the process of recovery in a single step.
Kind regards
Martin
-
I want to open two different pdf documents and view them at the same time so I can read a whole watching the other document. I use Acrobat DC and whenever I open a document, it creates a tab and I can only examine a document at a time. Is it possible to display two or more documents without having to toggle tabs?
Don't think that will work, but you can drag the tab to a new window. Each window can have a set of tabs.
-
PowerCLI to deploy virtual machines at the same time
Can I deploy multiple VMs usng PowerCLI, but they spread out in the order and with an error. It seems almost easier to deploy them manually so that they are created at the same time and not one after the other. I also want the static IP but don't know how.
For now, I use a card file customization that indicates static IP and guest for this. But he never does, he deploys the vms system then throws an error stating VC ' a specified parameter was not correct. nicsettings: adatpter:ip. "I want to increment IP addresses on virtual computers deploy.
This is my Basic .ps1 file content
New-vm - vmhost vm04a.domain.com - name w2k8sp2s64qa14-vm-model Template_w2k8sp2s64qa - Datastore vm04a_storage OSCustomizationspec - w2k8sp2s64
Can someone help me?
1 assign static IP addresses
2 deploy all virtual machines at the same time
...
The parameter - RunAsync right on the New - VM cmdlet.
She will continue with the line after the New - VM without delay that the cmdlet New - VM to finish.
-
Cannot open 2 Virtual Machines at the same time to access the same database
People,
Hello.
I'm installing RAC Oracle Database 11 g 2 system with 2 Virtual Machines (rac1 and rac2) on top 3 VMPlayer.
The VM rac1 and rac2 when one of them is stopped.
Their locations are F:\VM_RAC\rac1 and F:\VM_RAC\rac2.
I opened rac1 rac2 is running. But this error message appears:
Error: "cannot open F:\VM_RAC\sharerac\asm1.vmdk drive or one instant records, that depends. Reason: cannot lock the file. »
While rac1 running, I opened rac2. But this error message appears:
Error: "cannot open F:\VM_RAC\sharerac\asm1.vmdk drive or one instant records, that depends. Reason: cannot lock the file. »
2 error messages are the same. This means that I can not open 2and rac1 rac2 VMs at the same time. When we run RAC system, must open 2 "machines" or machines to more than 2 at the same time, so that all machines can access the same database server.
My question is:
Can all folk tell me how have rac1 and rac2 run at the same time?
Thank you.Unfortunately no, Oracle RAC requires that all nodes can visit the same set of shared disks. If your database resides within the DSO, each instance ASM (one per node) must also see the same set of disks to ASM diskgroup containing the data of the database files.
Best regards
Bryan Wood -
can I play the guitar and midi keyboards at the same time?
IM using the 3 main stage, I would like to play guitar and midi keyboards at the same time. I know that I can have more than one keyboard will at the same time, but I can't understand how to play the guitar too. I use a core Alesis 1 plug the guitar and a Keith McMillen 12 Step midi controller, he reads both just fine alone, but they play together. How can I get there? In addition, Im using a MacBook Pro OS X El Capitan.
Thank you
Mike
You add a bunch of audio channels and affect the Core 1 Alesis entry?
-
How to transform a layer object and a path at the same time?
Hi all
I know that I will start when you tell me the answer to this!
I would really like to know if there is a way I can manage to transform a layer object and a path at the same time... or if there is no work around to get there.
In a Word, for example I spend a VERY long time to create a drive complex around a very detailed object and then at the end note to what twisted and perspective, and would like to straighten.
Of course I could turn and correct the object and then carefully turn the path - but it will not correct and I have to spend a lot of time the path of adjustment and make SURE, it is perfect.
Are there not somehow, I was able to transform set?
Usually, of course, I do all the correction to straighten and correct the perspective in advance, but in some cases after I am done creating the path I then notice that image could have used other adjustments.
I appreciate all the advice you can get :)
Thank you kindly,
Christine
Transform the layer and then target the way and make "Edit > Transform path > Again. If you make several changes on the layer, and then each time that validate you and leave transformation mode, remember to do the ' transform path > Again "to keep the layer and the synchronized pathname.
-
Should I iMatch and music Apple at the same time?
Is there a point I iMatch and music Apple at the same time?
These are two different services > iCloud library: understand the differences between music from Apple and iTunes game - Apple Support
-
Why I have Photo and Photos open at the same time?
Why I have Photo and Photos open at the same time?
When what's going on? When you connect a camera or a card reader?
Or after the Mac is restarted?
If this occurs after startup, check system preferences > users and groups.
Select your account and open the connection. Deselect the applications you want to open at startup.
If this happens when you connect a camera, open the iPhoto preferences > general.
Set the preference "Connecting camera opens" to "no application".
-
Should I connect to the display, the vga cable and Dvi cable at the same time. I have a FP7 1110
UNUSED - a connection only (from the source of the same cylinder head box) - always!
DVI has better quality.C.
-
Windows defender and norton antivirus at the same time?
can I run windows defender and norton antivirus at the same time? I have Windows 7 and a lot of memory
I have HP Pavilion PC p7-1254
Yes.
-
The SD card is accessible by a BB App and Windows Explorer at the same time?
Hello
My requirement is that the SD card must be consulted by a BB App and Windows Explorer at the same time. But the BB app I developed is able to access the SD card only when the mass storage mode is turned off. Is this how the BB has designed or is it possible to have some logical coding for this?
Thank you
No, this is not possible.
-
the two versions of Muse (2015.0 and 2015.1) at the same time
Hello dear Musers,
Is it possible to install both versions (2015.0 AND 2015.1) at the same time?
I manage several sites and I want to be able to update regularly (stable and bug release 2015.0) while slowly, tests and moving them to reagent (2015.1)? Also to start playing with the possibilities of delicate design in Muse.
I also have a site with complex effects of scrolling that should stay that way. I can't run the risk of not working after the update... at least I have a replacement with Animations of EDGE...
Thanks for the help.
J. Vallejo
If you an active member of Muse and can accept the terms of the non-disclosure agreement, my recommendation would be to join the beta program of Muse at http://museprerelease.com. At the moment the latest preliminary 2015.1 is always displayed and it is basically identical to the retail version, but with a splash screen different. In general, it is deleted shortly after the production version is released, but has not yet happened.
The preliminary version installs the construction of shipping along the coast. The two have no overlap, other than the fact by double clicking a .muse file is a bit of a gamble in terms of what version of Muse, the operating system decides to launch.
-
Use NI ELVIS II Oscilloscope and Agilent Oscilloscope at the same time
Hello
I designed a circuit in the 3D NI ELVIS of Multisim view and I want to use the oscilloscope NI ELVIS II and Algilent oscilloscope show students how to work with the two oscilloscope but the problem is when I use both of them not of them works. Judgment of NI ELVIS II Oscilloscope running and the other a desnt show nothing but as soon as I delete the Agilent one OR ELVIS II Oscilloscope starts showing traces. I would like to know is possible to implement both at the same time
On my computer the two instruments work, but very slow
Here's a tip: disable ELVISmx instruments that you do not use (each active instrument consumes resources systems):
- Stop the simulation.
- Go in simulate > parameters of Simulation NI ELVIS.
- Uncheck the instruments that you do not use.
- Click OK.
When an ELVISmx instrument is disabled, a small red 'X' appears next to the upper right of the icon of the instrument on the schema.
Let me know how it works.
Maybe you are looking for
-
P70350 with the older M063-FF-206 engine
I will set up a system of movement and the customer has an old Kollmorgen M062-FF206 ENGINE, 1.5 AMPS (inductance mH 18). I wonder if I can drive it with the control of motors not to not P70350?
-
[Hello:] [I ' have a legal question for boys and girls:] transfer of ownership of a pc hp also used another part is this legal too do, and they will have all the rights too use the OS license.? Thank you Compaq Presario SR5223WMWINDOWS. VISTA 32 bitN
-
The task in Windows XP MCE Manager does not load
original title: TASK MANAGER XP MEDIA does not load with xp media center, the Task Manager does not, subst, remove it won't open, right click on the bar of tasks does not open it why?
-
Get reminders for KB2446708 already completed eventhough the update security update
Original title: KB2446708 security update I keep getting reminders on the above update even if I have already completed the update.
-
My windows 7 is not valid after windows 10 has been downloaded on my PC and I went back to Windows 7? Never had this problem before. What is going on???