Impossible to use Windows Live OneCare

Similar Questions

• How can I use Windows Live Onecare to restore my hard drive?

  I need to use windows live onecare to restore my hard drive I have backup files but no way we them... can you help me?

  original title: windows live onecare

  Hello

  Windows Live OneCare is no longer available for sale and all products and billing support is complete.
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials/OneCare

• Impossible to send using windows live mail with on restart my computer everytime, error 0x800CCC0F

  Impossible to send using windows live mail with on restart my computer every time.   I use broadband services, but they say it is not their problem

  It started a month ago.   Whenever I try to send an email using windows live mail, I get a failure;

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Subject ' Fw: Snowplow '
  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Start with this Port number.   Port 80 is usually reserved for HTTP.    Try the 25.

  Unless your host secureserver.net says something, otherwise...

  Oh.  They do it?  But no information for WLMail, so you have to adapt...

  http://products.secureserver.NET/email/email_thunderbird.htm

  (BING search engine for)
  Site: secureserver SMTP .net
  )

  In particular, I think, note this:

  NOTE: "smtpout.secureserver.net" is a relay SMTP server. To use this server to send e-mail messages, you must enable SMTP relay on your e-mail account. Connect to your management page email accounts to set up SMTP relay. If you have not set up SMTP relay and allows it to your Internet Service Provider (ISP), you can use the server of mail from your Internet Service provider. Contact your Internet service provider for this setting.
  

  BTW if you use WLMail.exe you can also try to get help from the WLSC through its Mail Portal

  http://windowslivehelp.com/product.aspx?ProductID=15

  Good luck

  Robert Aldwinckle
  ---

• Impossible to send a link to the Web page by email it is gray im using windows live mail and windows 7

  Impossible to send a link to the Web page by email it is gray im using windows live mail and windows 7

  Look at: Start-> Default Programs-> set your default programs
  Select: Windows Live Mail

  --
  Karel your [MVP - Windows desktop experience]

• Impossible to send, reply to or forward emails using Windows Live Mail

  Impossible to answer, send or transfer emails using Windows Live Mail since that it has been updated about a week ago. I now get the error: 0xC00CE508 plus a number whole errors listed under failed to initialize the canvas part I use Windows 7.

  I suggest you re-check your e-mail provided by your ISP settings.

  Also, your probably better poster on forum Windows Live to help...

  http://www.windowslivehelp.com/

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• Try to defragment (Vista/Windows Live OneCare)... No way to track progress?

  Please forgive me if I am posting this in the wrong place...

  I get messages in Windows Live OneCare, which is supposed to manage my 'tune up' monthly including defragment my hard drive, saying that "Defrag has only partially completed due to high levels of fragmentation."  My computer is really slow and so I try to do a full defrag - but the window Disk Defragmenter has just said that there "defragmentation, which can last a few minutes or a few hours.  Is it possible to track its progress?  It is the first version of windows I've used that did not have a kind of screen with boxes inside as well as the Defragmenter, indicating what has been done.  For more than a few hours Defragmenter that happened and always says the same thing.  I've done a few times, and I can't tell if it's just hang up or if it's even the defragmentation.  usually after that about 8 to 12 hours, I start to swear, abandon and simply cancel it.

  Please help - I'm about to hire a ninja out of my computer...  Thank you!!!

  Little.

  I can't understand why people want an old defrag process. I want to use my computers, not watch the blocks move around the screen. With XP and earlier versions, defragmentation was not a dynamic process which took place without user intervention. You need to stop using the machine or program it so that it occurs in the middle of the night, because any interruption, even something as simple as a kick, screen saver required process to start over. Some machines would never get defragmented due to other processes constantly interfere.

  Subsequently, the machine will start to become more and more fragmented, until the user remembers to start the process.

  With Vista, it's a continuous process of low priority that does not interfere with your use of the machine. Simply, it is done without having to do a thing. And it is ongoing, the machine must never get heavily fragmented.

  As I mentioned earlier, if you - or anyone - really wants to watch the blocks to move, there are a lot of software vendors that will allow you to give them your money if you can. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Security Scanner Windows live onecare says I have 1 port open

  Have I not Aproblem? scan of Microsoft onecare pc says I have 1 port open (does not identify which port) but can't close it, and I can't find the firewall ports not should I secerity issue?

  Hi glassrat1,

  Please post your question in the forum below for assistance:

  Windows Live OneCare general forum

  http://social.Microsoft.com/forums/en/onecaregeneral/threads

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Black screen after account open a session and problems in Windows Live OneCare

  Hello

  I've read other similar questions but I am writing a separate thread because my situation is slightly different. My apologies for the long post, but I'm desperate.

  Computer information: Dell inspiron 1525 laptop. 32-bit Windows Vista Help

  My current problem is the following:

  I have three user accounts. When I start the computer using the Normal two of them, including the administrator, can connect to but a black screen with only the cursor appears just after. The third account, a "guest" account is not affected and works perfectly.

  When I start the computer in Mode without failure or Safe Mode with networking, both messed up accounts can connect to and no black screen, Windows works apparently fine. However, this third guest account cannot connect. This error message: "Windows cannot connect to the service of the sense. Please contact your system administrator. »

  I ran MalwareBytes all three user accounts. The Admin account has 2 infected files.

  Infected registry keys:
  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {1d4db7d2-6ec9-47a3-bd87-1e41684e07bb} (Adware.MyWebSearch)-> quarantined and deleted successfully.

  Infected registry data items:
  HKEY_CLASSES_ROOT\regfile\shell\open\command\ (Default) (Broken.OpenCommand)-> Bad: ("regedit.exe" "%1") good: (regedit.exe "%1")-> quarantined and deleted successfully.

  ^ This is the current problem that began Monday night. Here is what happened this afternoon before the problem.

  1. Tried to use iTunes but it suddenly refused to open. I read that iTunes does not open if my firewall is not up-to-date or there are security problems.
  2. I tried to look at Windows Live OneCare, but which does not either. Said that there is a problem. I can't scan anything.
  3. Windows Defender does not light and I can't update the definitions.
  4. I rebooted the laptop several times, did not help.
  5. The hub for OneCare computer works fine.
  6. I did a system restore to a date a week or two before.
  7. Downloaded MalwareBytes and ran scan.
  8. Forums suggested the fix Prevx. I followed these instructions, but as I tried to run with the black screen up on my Admin account, it would freeze just so that the computer checked.
  9. Repair the system says it's clean.
  10. I changed my settings so that Windows does not updated Automatic due to problems of the past. I currently can't update anything because the laptop freezes after clicking on the icon.

  Thanks for any help.

  I have 2 PC which have made in the last 7 days, last update Microsoft OneCare was killied accounts Admin,.

  To fix, you need to uninstall Onecare through the tool of uninstalling the program.

  Heres how

  (1) start the computer Safe Mode (press f8 just before the first window of the screen with the time bar) and log on to the Admin account

  (2) execute MSCONFIG as editable (type search box of the start menu, right click and run as administrator)

  (3) select Diagnostic startup and click ok, then restart

  (4) log on as administrator, and then start /panneau Panel programs and features select Windows Live OneCare in the list and uninstall. This may fail with an error (it did on both the PC I corrected.)

  (5) run MSCONFIG as administrator again select normal startup, OK and restart and it solved the problem

  (6) install the new Microsoft Security Essentials that OneCare will anyway

• Time protection real HELP in MSE stopped working after running the utility in Windows Live OneCare cleanup tool?

  Protection in real time in MSE stopped working after running the utility in Windows Live OneCare cleanup tool? Error Code: 0x800705b4

  Hello Wally,

  Thanks for posting your query on the Microsoft Community.

  The question error codes and the description that you get suggests that you are facing problem when using MSE. This problem may occur if other security software, such as antivirus, antispyware and antimalware programs, are totally or partially installed on the computer.

  I suggest to change firewall security settings or disable temporary security on the system software and try using MSE and see if it makes a difference. How to temporarily disable security software, you can view the article mentioned below.

   

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  For more details, please see the article mentioned below and see that it helps you to fix the problem.

  Real-time protection lights in Microsoft Security Essentials

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Uninstall Windows Live OneCare

  I installed Security Essentials and when I try to uninstall Windows Live OneCare by using the cleaning program, I get the message that this can only be done by the administrator.  I am logged in as administrator.

  I am also unable to uninstall McAfee SecurityCenter.

  Hello

  Follow the steps provided by Waseemulla Shariff in http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-do-i-uninstall-windows-live-onecare/bf78dae1-037e-4426-83e8-fcef4ca8b115 to uninstall Live OneCare on your computer.

  To uninstall Mcafee Security Center, use the http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe Mcafee product removal tool and complete uninstallation.

  For reference: go through http://service.mcafee.com/FAQDocument.aspx?id=TS101331 to learn how to use the Mcafee product removal tool on the computer.

  Important note: do not use more than one program antivirus on your computer, as they may conflict with each other and cause no start situation.

• write links don't work in firefox using windows live mail

  I use windows live for my email client. None of the mailto: links work with windows live in firefox. I checked and double checked all the settings and confirmed windows live is my default e-mail client. They work in IE 9 and Chrome, but not firefox.

  You can remove and Add again and see if that helps. The choice of "Application Détails" at the bottom of the drop-down list will allow you to delete the one you currently have.

• When I click on an e-mail on a web page, I want that it open / compose new messages in GMAIL (currently it uses Windows Live Mail). How do I?

  When I click on an e-mail on a web page, I want that it open / compose new messages in GMAIL (currently it uses Windows Live Mail). How do I?

  See this:
  
  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+Firefox

• I use Windows Live Hotmail, and would like to know if I can and how to return to MSN Hotmail?

  I am currently using Windows Live Hotmail.  I would like to know if I can go back to MSN Hotmail, the old version and how to do it?

  MSN Hotmail was dismantled in 2007 and renamed to Windows Live Hotmail.

  Noel

• just started using windows live mail and it strips attachments PowerPoint, I receive. How can I change this?

  just started using windows live mail and it strips attachments PowerPoint, I receive. How can I change this?

  Hi hanksterman,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=15

• How to make files that when saved using Windows Live One care running Windows Vista to restore to a new computer that is running Windows 7

  I can't believe this... I bought a new HP Touch-Smart 300 running Windows 7 and when I try to restore the files I saved on my external hard drive on my Sony Vaio which ran Widows Vista and which were backed up by using WINDOWS LIVE ONE care (that I now here will not be supported more after my purchase of 66 dollars). PROGRAMS WON'T TALK TO EACH OTHER AND WILL NOT RESTORE THE THOUSANDS OF HOURS OF WORK... I HAVE NOW HEARD SO MANY EXCUSES AND BACKASS _ SOULTIONS DO THIS PROBLEM, IT OF AMAZING, NOTHING WORKED.  Mr. Gates... Why - how could someone so stupid (HELLO BILLY... is there anyone in there, BECAUSE no matter WHO WITH SOME TINY, any LITTLE BIT OF FORETHOUHT WORK for YOU). YOU SOLD me a RENEWAL to THE Windows Live One-care PROGRAM a FEW months ago, WHEN YOU HAD to KNOW this PROBLEM EXISTED. YOU HAD to KNOW THAT MILLIONS OF PEOPLE HAVE backed UP THEIR FILES USING WIDOWS VISTA AND like me need a seem - less a way to bring the files from Windows Vista to Windows 7. THIS SEEMS TO ME AS IF IT IS A CLASS ACTION LAWSUIT JUST WAITNG FOR HUNDREDS OF MILLIONS OF DOLLARS OF WMSD AND LOST IN WAITING FOR REEMBURSEMENT FILES? I HOPE YOU HEAR from someone WHO KNOWS THE ANSWER to THIS PROBLEM AND I hope YOUR ATTORNEY WHO CAN SEE the OPPORTUNITY IN THIS ARCANE ERROR, TRY brand S... AND +++ VRS MIRCROSOFT * address email is removed from the privacy * or * address email is removed from the privacy *. Thank you, Mark-S

  Mark,
  You can watch the forum Stephen note boots located here: http://social.microsoft.com/Forums/en/onecarebackupandrestore/thread/e5d686c8-762b-4b22-bc08-bfb93f911e57

  Which deals with this situation you encounter.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.