Impression on the LPT ports on Server 2008
Hi all
I use an application via RDP on a Server 2008 R2 server. The application prints directly to a pre-defined LPT port, on the same server, which is redirected. When I print it does not say that it cannot find the port.
I tried running the application directly on the server and print also fails.
I have the same setup and configuration running on Server 2003 without problem. It also fails on windows7?
If someone could give me some advice of where to start the search it would be highly appreciated.
Thank you very much
Fraser
Hello Fraser,.
The question you have posted is associated with Windows Server and then good place for you to contact would be TechNet support.
I suggest you to check with TechNet for more information.
http://social.technet.Microsoft.com/forums/en-us/newThread?category=WindowsServer&Forum
Tags: Windows
Similar Questions
-
Error message when I run delete the query in SQL Server 2008.
Error message when I run delete the query in SQL Server 2008 SP3.
Error message:
MSG 0, level 11, State 0, line 0
A serious error occurred on the current command. The results, if any, should be discarded.I never got any problem since 5 years.
Please let me know what is the cause of the problem.
You can get a response better/faster if repost you your question in the instances of SQL Server dedicated from Microsoft here:
http://social.technet.microsoft.com/Forums/en-us/category/sqlserver .
Thank you. :)
(I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)
-
vCenter totally blocked by the firewall of windows server 2008.
I installed vcenter server on windows server 2008 R2 and windows firewall blocks for her communication (port 80/443/389). I checked and there are clear rules in the firewall that allow traffic as vcenter put there during the installation. But the server does not allow traffic only.
If your windows machine is a member server in your windows AD it have up to 3 profiles of different firewall (public, private, domain,). Do not forget that all the rules part of the 'area' or better 'public' profile If windows cannot reach a DC windows during startup it does not use the firewall profile 'area' and you cannot access the services of vcenter in this case.
Concerning
Joerg
-
Portege R600 - cannot update the BIOS using Win server 2008
Hi all.
Pls help...
I tried to update my bios to the new version, but I can't.
I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:
Package for the TOSHIBA BIOS ver.3.2.9
Unsupported product type is installed.
Package BIOS BIOS Version: Ver.1.80
Current BIOS version: Ver.1.40So my question is what am I doing wrong? I'm trying to update my bios from windows.
is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)
Thank you.
Hello
Your OS windows seems not to be the Windows which was preinstalled on your Portege
You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64You will need to put the system which has been pre-installed by Toshiba
Good bye
-
error of the MMC in windows server 2008 r2
while closing after my windows server 2008 r2, many programs are open so I tried to close all the one by a sudden .at instead of using the X I used the close button. in mmc, I suppose that an error has occurred that caused problem blocking the program works correctly
1 debug the program
2. close the program
I opted first then after closing the program, debug in my server its marked as an error event viewer now. No. changed happened in my network. and it of good now
I just wanted to know the weather, that it will lead to other problems in the future
the description of the error below
Name of the failing application: mmc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc808
The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc000041d
Offset error: 0 x 0000000000000000
ID of the process failed: 0 x 1250
Start time of application vulnerabilities: 0x01d2126e21d827f5
The failing application path: C:\Windows\system32\mmc.exe
Path of the failing module: unknown
Report ID: 6acff019-7e81-11e6-ade8-001aa08bdf6fam new on the server field pls sujjest me a response to make sure that my server running without any problem...
This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
Y at - it a x 86 version of the patch KB2852386 for Server 2008?
I want to run the cleaning utility disk with the updated Windows Cleanup option selected, according to the https://support.microsoft.com/en-us/kb/2852386. My winsxs folder is too big
I have an old 32-bit machine running Server 2008 SP2. But he has no patch for x 86 listed for download. Windows 7 x 86 patch does not install. Are there options here?
Thanks in advance.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Issue of license; need information on the purchase of Windows Server 2008 R2 with 25 CAL
I am looking to buy Windows Server 2008 R2 with 25 CAL. The question I ask myself, is that if I were to continue this RDS would come with the initial 25 CAL or it would cost more. If so, how much per RDS? and how much would cost the package for the Windows Server 2008 R2 with 25 RDS CAL company.
Thanks in advance
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
[REQUEST] Limit the ability of Windows Server 2008?
I want to ask about the capacity limit of Windows Server 2008?
-Maximum number of users that can create a server
-Maximum groups
-Maximum memory
-Maximum storage
-Maximum Admin
-Maximum number of connection for a second
-Maximum CPU
Ask in the forum Windows Server:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
What is the difference between windows server 2008 and windows server 2012?
I'd be grateful if someone could give a comparative perspective of the two products.
Hello LSAKR,
Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question about Windows Server would be better treated in the TechNet for Windows Server forums.
Click here to transfer your question in the general Windows Server 2008 forum.
Sincerely,
Marilyn
-
Note the ODBC for Windows server 2008 64-bit driver
Hi all, :-)
I hope that some of you are able to help me, because I'm stuck in a situation which is very frustrating.
My server configuration is:
Microsoft Windows 2008 64 bit server,
Microsoft SQL Server 2008 R2.
Via this server that im supposed to to connect to several databases IBM Lotus Notes 8.5, which are placed on other servers.
I would like to install the latest driver for Lotus Notes ODBC (8.5.1) and use it for links between Lotus Notes databases to SQL Server.
When I run the Setup, I get a dialogbox with installation information. He says that this anomang installation was successful.
My sequential current problem is, that I'm not able to see the driver anywhere. (througt datasources or c:\windows\syswow64\odbcad32).
Thanks in advance.
Lars Bernstorff Hansen
Hello
This question is better suited for the IT Pro TechNet public. You can go and search/post on this topic in the link provided
http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
-
How to remove the version of WIndows Server 2008 R2 180 days?
My version of the above is outdated now, and I want to remove it from my system. I am running a triple-boot of installation, including Windows 7 Ultimate 64 bit, Windows Server 2008 R2 and Ubuntu. I want to remove the server completely, including in the list of startup options. I don't know how to proceed.
Any advice will be greatly appreciated.ArthurHi, Arthur.
Try the following:
Uninstalling SQL Server 2008 R2 evaluation edition
http://TechNet.Microsoft.com/en-us/magazine/gg491398.aspx
The TechNet forum is available here
http://social.technet.Microsoft.com/forums/en-us/categories/
-
Error connectign the ODBC driver on Server 2008 R2
Hi all
I use a 32-bit application on windows server 2008 R2, I Heve to connect to oracle DB on another server (win 2003 32-bit).I Heve created the "C:\Windows\SysWOW64\odbcad32.exe" ODBC driver but I've always found this error ' specific driver could not be loaded due to the error 1114 system: a dynamic link library (DLL) initialization routine failed. " (Oracle in 32bit_Oracle_OraClient11g_home1, C:\app\Oracle\BIN\SQORA32. (DLL).Could you please help me solve this problem?Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
http://TechNet.Microsoft.com/en-us/WindowsServer/bb512919 -
Manually download the update for Windows Server 2008 and Windows Vista platform
Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?
I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.
Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Anyone know when the SP1 for SQL Server 2008 R2 is available
We have a problem that is related to parallel processing (MAXDOP) and were informed that this would be solved in SP1 for SQL Server 2008 R2. Can anyone provide indications as to when that is being released as a download?
You the problem are solved better post on the TechNet forum: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/threads
J W Stuart: http://www.pagestart.com
-
Hello
I'm trying to impersonate another Administrators\ [an other domian user] to do some access to the registry key/value with an Administrators\ [my domain user].
Failed with some registry access denied.
The code is quite format.
1. the user to logon: LogonUser (username, domain, password, LOGON32_LOGON_INTERACTIVE, LOGON32_PROVIDER_DEFAULT, Ref token)! = 0)
2 DuplicateToken: DuplicateToken (token, SecurityImpersonation, ref tokenDuplicate)
3 impersonate another user:
m_ImpersonatedUser = new WindowsIdentity (tokenDuplicate);using (m_ImpersonationContext = m_ImpersonatedUser.Impersonate ())
{
access to the registry key.
...
}This works on Windows7 and some windows server 2008, if the new WindowsIdentity.AuthenticationType is "Kerberos", then it works, but if it's the "negotiation", it will fail.
Can someone tell how to force the AuthenticationType to be "Kerberos"?
Thank you.
Hello
I suggest you to ask your question at the following link.
http://social.technet.Microsoft.com/forums/en-us/101ed379-ba6c-4974-BF47-c0e068515116/Server
Maybe you are looking for
-
M60-164: keyboard failure?
I've only had the M60-164 yesterday, but the keyboard is incredibly unresponsive. When you type, missing letters, ones that I definitely struck. Its been driving me up the wall typing passwords in 3 or 4 times because it removes a different letter ea
-
Anyone got 5 HD DVD for free?
Hello I wonder, if someone got 5 free HD DVD as part of the HD DVD laptop purchase? Thank you! ConcerningSuraj
-
PDFS IN EMAIL DON'T BE POSTER NOT OPENING
Whenever I try to open .pdf files are sent to me via e-mail messages, he has never displayed on the page. He says, "DONE" at the bottom left, but the page is empty. There is no error message any. In addition, when I hover over links or words, I get
-
Computer laptop Windows 8 draining the battery once completely shutdown or Hibernate
I recently bought the Hp DV6 Envy laptop 7210tx with built in Windows 8. Everything works fine, but when I shutdown or Hibernate this machine its battery drains almost 1.5%/hr. So in one night, it is almost 15% down. I have disabled all wake-up setti
-
I followed the pretty good learncfinaweek and can see no error in my code. Here is the error, that should solve and the page with the code. Any help is appreciated. This should be quite simply like this: < cfset blogPost.dateposted = importData [