vCenter totally blocked by the firewall of windows server 2008.

Similar Questions

• error of the MMC in windows server 2008 r2

  while closing after my windows server 2008 r2, many programs are open so I tried to close all the one by a sudden .at instead of using the X I used the close button. in mmc, I suppose that an error has occurred that caused problem blocking the program works correctly   

  1 debug the program

  2. close the program

  I opted first then after closing the program, debug in my server its marked as an error event viewer now. No. changed happened in my network. and it of good now

  I just wanted to know the weather, that it will lead to other problems in the future

  the description of the error below

  Name of the failing application: mmc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc808
  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
  Exception code: 0xc000041d
  Offset error: 0 x 0000000000000000
  ID of the process failed: 0 x 1250
  Start time of application vulnerabilities: 0x01d2126e21d827f5
  The failing application path: C:\Windows\system32\mmc.exe
  Path of the failing module: unknown
  Report ID: 6acff019-7e81-11e6-ade8-001aa08bdf6f

  am new on the server field pls sujjest me a response to make sure that my server running without any problem...

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Issue of license; need information on the purchase of Windows Server 2008 R2 with 25 CAL

  I am looking to buy Windows Server 2008 R2 with 25 CAL.  The question I ask myself, is that if I were to continue this RDS would come with the initial 25 CAL or it would cost more.  If so, how much per RDS? and how much would cost the package for the Windows Server 2008 R2 with 25 RDS CAL company.

  Thanks in advance

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• [REQUEST] Limit the ability of Windows Server 2008?

  I want to ask about the capacity limit of Windows Server 2008?

  -Maximum number of users that can create a server

  -Maximum groups

  -Maximum memory

  -Maximum storage

  -Maximum Admin

  -Maximum number of connection for a second

  -Maximum CPU

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• What is the difference between windows server 2008 and windows server 2012?

  I'd be grateful if someone could give a comparative perspective of the two products.

  Hello LSAKR,

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question about Windows Server would be better treated in the TechNet for Windows Server forums.

  Click here to transfer your question in the general Windows Server 2008 forum.

  Sincerely,

  Marilyn

• How to remove the version of WIndows Server 2008 R2 180 days?

  My version of the above is outdated now, and I want to remove it from my system. I am running a triple-boot of installation, including Windows 7 Ultimate 64 bit, Windows Server 2008 R2 and Ubuntu. I want to remove the server completely, including in the list of startup options. I don't know how to proceed.

  Any advice will be greatly appreciated.
  Arthur

  Hi, Arthur.

  Try the following:

  Uninstalling SQL Server 2008 R2 evaluation edition

  http://SQLBlog.com/blogs/aaron_bertrand/archive/2010/10/25/fun-with-software-uninstalling-SQL-Server-2008-R2-Evaluation-Edition.aspx

  http://TechNet.Microsoft.com/en-us/magazine/gg491398.aspx

  The TechNet forum is available here

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Manually download the update for Windows Server 2008 and Windows Vista platform

  Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

  I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

  Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Impersonate user without privilege preferred to access the registry on Windows Server 2008 key/value.

  Hello

  I'm trying to impersonate another Administrators\ [an other domian user] to do some access to the registry key/value with an Administrators\ [my domain user].

  Failed with some registry access denied.

  The code is quite format.

  1. the user to logon: LogonUser (username, domain, password, LOGON32_LOGON_INTERACTIVE, LOGON32_PROVIDER_DEFAULT, Ref token)! = 0)

  2 DuplicateToken: DuplicateToken (token, SecurityImpersonation, ref tokenDuplicate)

  3 impersonate another user:
  m_ImpersonatedUser = new WindowsIdentity (tokenDuplicate);

  using (m_ImpersonationContext = m_ImpersonatedUser.Impersonate ())

  {

  access to the registry key.

  ...
  }

  This works on Windows7 and some windows server 2008, if the new WindowsIdentity.AuthenticationType is "Kerberos", then it works, but if it's the "negotiation", it will fail.

  Can someone tell how to force the AuthenticationType to be "Kerberos"?

  Thank you.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/101ed379-ba6c-4974-BF47-c0e068515116/Server

• The service of Windows Server 2008 SP2 user profile fails to load my profile

  the user profile service failed to load my profile in windows server 2008 sp2 Enterprise

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  They will help you in the 2008 Server Forums at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update will not install the hotfix on Windows Server 2008 R2 Service Pack 1 KB3122648

  Hello

  I tried several times to install "MS16-019: Description of the update of security for .NET Framework 3.5.1 in Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1" on a Windows Server 2008 R2, running Service Pack 1

  Windows Update has always ends with 'Failure' / has encountered an unknown error. Code 80073712

  The convenience store has not solved it either.

  The server is not really exposed to 'outside' as such, runs in a local network, regular, small; but sometimes, a web browser may be in use.

  Is there anything that can / should be done here to remedy the failure of the installation? Or free time and even not to worry about this?

  It would be great to have a few strong indications here. Thank you!

  System File Checker shows errors that are likely to cause problems with Windows Update. I would like to reinstall Windows Server 2008. That said, I have no direct experience of Windows Server 2008, so I'm not really able to help you.

  The Microsoft Community Forums are intended to provide support in hand to hand for users of Microsoft products. These products are not Windows Server 2008. You can request additional assistance through the TechNet forums:
  https://social.technet.Microsoft.com/forums/en-us/home

• How to disable the product key Windows Server 2008 R2 on Oracle Virtual Box?

  Original title: disable the windows server 2008 r2 key

  I have oracle VM and activated windows server 2008 r2 on a virtual machine. I just VMware workstation God 9 and I would like to reactivate in a VMware virtual machine. How can I disable the key so that it can be reactivated?

  Click Start, type: CMD
  Right-click on CMD
  Click on run as administrator
  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer. If you experience problems, try to activate by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• Assistance needed for the installation of windows server 2008 r2

  Hello users,.

  I am new to this technology of the virtual environment and I need help in installing windows server 2008 r2 on a machine virtual workstation. For it so what are the recommended setting for drivers, no. of processors, amount of RAM, type of CISS or sata... etc to give the best performance on my virtual machine. If possible please provide me details to my knowledge.

  Thanks in advance

  Are you sure that you have installed a Windows Server 2008 R2?

  Because the normal procedure is that after the installation, you will get a prompt to choose an administrator password. Once you are connected.

  There is no additional user created during installation. This only happens when you install versions of Windows desktop.

• 500 error after installing the CF on Windows Server 2008 IIS7 9.0.2

  After installing the CF 9.0.2 on Windows Server 2008 with IIS7, I get an error 500 return of all my websites.  I made sure to change the permissions in the C:\ColdFusion9 folder to full control for psaadm, psacln.  I'm sure that CGI, ISAPI extensions and ISAPI filters are installed.  I rebooted.  I can access the administration of CF on the server, but all of my websites are generating 500 errors on remote browsers.  The uninstall does not solve the problem.  Help, please.  What can I do?

  Problem solved!  It was related to incompatibilities of 32-bit/64-bit with Plesk.  There are two steps to solve this problem:

  1 snap the Internet Information services manager, access the properties of the advanced application pool and enable 32-Bit Applications 'false' for plesk (default) (2.0) (pool) value.

  2. in Plesk, disable the Web statistics (accessible via password protected directory ' / plesk-stat/webstat /')

  Note that you will not be able to use the functionality of Plesk protected directory until Plesk solves this problem.

  Complete in writing to the top of the solution by AndorA in Plesk forums can be found at: http://forum.parallels.com/showthread.php?t=262903

  Andor thanks!

• Note the ODBC for Windows server 2008 64-bit driver

  Hi all, :-)

  I hope that some of you are able to help me, because I'm stuck in a situation which is very frustrating.

  My server configuration is:

  Microsoft Windows 2008 64 bit server,

  Microsoft SQL Server 2008 R2.

  Via this server that im supposed to to connect to several databases IBM Lotus Notes 8.5, which are placed on other servers.

  I would like to install the latest driver for Lotus Notes ODBC (8.5.1) and use it for links between Lotus Notes databases to SQL Server.

  When I run the Setup, I get a dialogbox with installation information. He says that this anomang installation was successful.

  My sequential current problem is, that I'm not able to see the driver anywhere. (througt datasources or c:\windows\syswow64\odbcad32).

  Thanks in advance.

  Lars Bernstorff Hansen

  Hello

  This question is better suited for the IT Pro TechNet public. You can go and search/post on this topic in the link provided

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

• Cannot convert the machine to Windows Server 2008

  I checked all these forums, but the solutions don't help me at this moment. I'm a bit new to Vmware, I can work around most standard tasks. I'm trying my first conversion of a physical to virtual machine. When I try to let the agent deploy it tells me that it is impossible to connect to the network "XXX.XXX.XXX.XXX\ADMIN$".

  I have enabled file sharing, I ran the net share and sharing is enabled. Is there something that I could be missing?

  Any help would be appreciated.

  Thank you.

  Hello and welcome to the forum

  You need to connect to the source computer as administrator or turn off UAC. You must also configure or disable the firewall.

  You can also - install agent converter manually on the source.

  Kind regards

  Plamen