Improvement of the aquistion of ADC pulse time
Hello
I use Labview 8.6 Professional version and an ADC NI PXI-5114 in a chassis PXI-1033 to capture some positives. The pulse widths are in the order of 100 ns to 10. The impulses can reach CDA at random times.
With the search here, I found some suggestions very useful and therefore following the examples of Labview OR-Scope my Foundation, I managed to set up a program that allows you to capture these impulses. For now it works great except for one thing. It will not capture consecutive pulses that are closer than 2ms. It is too slow for my application, actually faster than I can be ready to seize the next pulse best. If I can get this time back down to about 200 US, I'll be happy. The ADC 5114 specifications indicate a time to rearm in the low microsecond range so I know the hardware is capable of doing much better that what I mean but this is translating to the software side of things gives me some difficulties.
As much as I know there is no trigger to start and stop captures data on one edge, so in my program I capture of basic data on extraction into pieces and use a signal processing subVIs to pick up the trailing edge of the pulse in order to know when to stop capturing data. If the pulse width has been set then this wouldn't be a problem, but as I don't know what it will be, I prefer to capture just the pulse so that I don't miss other legumes.
Is it an inefficient way to solve the problem and what is perhaps originally the code is running slowly?
I would appreciate any help with a solution to this time getting 'rearm' down (or comment on my code and that you feel would improve it). I've been using Labview for a few years (only to learn as I go), but it's my first shot using NOR-Scope and a digitizer high speed.
All suggestions are welcome!
Thank you
Daniel
More importantly, if you want to rearm fast, deterministic, you must use multi-record acquisition. This sets up the device automatically and very quickly (depending on the configuration and device, 1us to 10us), rearm. As you apparently don't know how long the pulse can be at any point in time, you must set up the record for a reference position length small (say 10% for 10% pre, post 90% trigger) and samples sufficient to cover your expected worse (10us + 10% pre-trigger + a margin engineering for a pulse that is wider than expected).
You can activate the multi-record acquisition by plugging in just in a number to Terminal "number of records" on the Horizontal VI to configure. This will configure the digitizer to divide his memory embedded in N circular buffers to store individual records triggered. It is the only mode that you can expect to get quick reset time on as host, recovery time, and duration of treatment are not the bottleneck.
Once you do this, you will need to make a few small changes to the rest of your VI existing to control what (s) you are to pick up. I suggest you look at the examples of Multirecord NOR-Scope. If the flow is a concern, you probably want to fetch multiple records at a time.
Tags: NI Products
Similar Questions
-
Change the width of digital pulse inside the loop
Hello
I am looking for a solution that allow you to change the width of digital pulse inside while loop.
Thanks in advance
Check the operation of dataflow and single pulse meter output
First counter generates little time, then big time.
Your AO task then is to adjust tension on IT after Dig pulse. After the AO pulse width, he needs to put down
If the Trac software is small enough for you, you might have used USB-6008 ($250), not Xseries $ 1600 - apparently of an overdose. X series can do this work with a void microsecond resolution.
-
So far, no improvement in the protection against Spam
Seeing no improvement with the anti-spam protection so far in Blog comments, despite the new BC update from yesterday that started the Akismet anti-spam protection. Just after the update, I reset my settings in the comments to require comment approval and the new anti-spam Protection setting, and then spent a LOT of time marking nearly 800 previous comments submitted over the past months as Spam.
But yesterday and continues today, my blogs are always getting hit with the same amount of spam as in the past, and of course, it's the same pirates who have sent such things throughout: PayDay loans etc.
For the record, there must be a robot submitting this spam because on my comment form I do not display the Web site field so that humans can not complete (because they do not) but still it's fill, so it must be a robot with that sort of thing that reads HTML and ignorning flow my CSS display : none on the domain of the Web site.
Frustrating... hoping that something will improve because all my customer sites are also infected by spam... customer feedback for me that they are concerned that the middle of BC is not safe and they worry about maintaining security of transaction as well as the result all the spamming.
Hi all
We just released the new spam protection features.
I also created a doc on this forum explaining best practices on how to avoid SPAM:http://forums.adobe.com/docs/DOC-2882
All comments are welcome.
Dragos M.
-
improvement of the performance.
Hello expert,
I have a statement below, the plan of the explain command showed using search for the complete execution of the table, what can I improve using the index (index have already here), appreciate.
Select
pp.policy_premium_pk,
pp.policy_fk,
pp.policy_term_fk,
pp.risk_fk,
pp.coverage_fk,
pp.transaction_log_fk,
pp.coverage_component_code,
hiroc_rpt_user.hiroc_get_delta_amount (pp.policy_fk, pp.policy_term_fk, pp.risk_fk, pp.coverage_fk, pp.transaction_log_fk,
pp.coverage_component_code),
pp.rate_period_from_date
proddw_mart.rmv_policy_premium pp
where pp.rate_period_type_code = 'TERM_COVG. '
and pp.coverage_component_code <>'NETPREM '.
Pp.policy_premium_pk group,
pp.policy_premium_pk,
pp.policy_fk,
pp.policy_term_fk,
pp.risk_fk,
pp.coverage_fk,
pp.transaction_log_fk,
pp.coverage_component_code,
pp.rate_period_from_date
the execution plan is the following:
OPERATING OPTIONS OBJECT_NAME POSITION
SELECT THE 35 396 DECLARATION
HASH GROUP BY 1
MAT_VIEW FULL RMV_POLICY_PREMIUM ACCESS 1Hello
It is likely that the index is not used because the query returns a volume of data that allows access to an ineffective index. To access the rows of 3.5 m of data should take minutes, not hours with a full table scan, so I don't think that access to the table is the question.
I suggest that you run a trace of your session and then use TKPROF to analyze the trace file. I bet you will find that the function call contains the SQL statements that are responsible for the majority of your time.
Just because a query uses an index and runs quickly does not mean that each query must use an index to run quickly.
David
PS You can quickly verify that the function is the source of the problem by removing the SQL statement and then run the new statement.
Published by: David Tyler June 24, 2011 16:21
-
Impossible to extend the existing wi - fi with time capsule airport
Hello
I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).
I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.
In addition, I have an Extender provided by the ISP of lower level.
I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.
I tried several times to do so, but either it freezes up or creates its own network despite the
mode bridge as stated in Airport utility.
Guide gently with the method or Protocol correct to put that in place.
Thank you
Jay
I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.
It sounds like you may try to extend the network of your "main" router wireless
The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station. Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.
So, the first question to ask here would be... What is the number of brand and model of your router "main"?
If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network. If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.
-
My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n
A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.
Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.
-
How can I change the network address of my Time Machine drive?
Hi people,
This is my second question in 12 hours. Thanks to help I received here, I abandoned my doomed attempt to use my old AirPort Extreme and a USB key for Time Machine backups.
I've used my ReadyNAS for Time Machine backups, but it has never been reliable. I think I have tracked the question and I would like to try again. However, Time Machine remembers the old network address for the ReadyNAS unit (smb://NAS_TimeMachine.local/ReadyNAS) and does not 'see' the same unit at current address (afp://[email protected]/NASTimeMachine). You could collect that networking is not something I understand.
I think that this can be also responsible for the boring 'There was a problem... "messages that I receive at startup telling me the drive could not be mounted.
Is there a way to force the time Machine to forget the old address and 'see' a new?
See you soon,.
Grant
(PS I have also posted this question on the legacy of networking community, but I think it's a better place for this)
Click the 'clock' Time machine at the top of the screen of the Mac
Click Open Time Machine Preferences
Click select drive
Click on a disc that appears under the heading of backup discs , so that it appears highlighted
Click remove disk
Do the same for all the other disks that may appear under the heading of backup discs
Turn off and restart the AirPort Extreme
Restart the Mac.
Click the 'clock' Time machine at the top of the screen
Click Open Time Machine Preferences
Click select drives
Under the heading of available records , click a disk that you want to use to highlight the disk
Click use the disk
Close the windows
Wait a few minutes to see if a backup will start. Otherwise, click the "clock" Time machine at the top of the screen, then click on NTI Backup Now
Report on the results
-
I just upgraded to Thunderbird 31.3.0 (on Windows 7). Now I can no longer launch Thunderbird. This shows only the Mozilla Crash Reporter every time.
How do I recover from this?
Is it possible to revert to a previous version?
You can download the previous version of . mozilla.org and install it. After that revert to your previous version, you can check your incident reports to see what was causing the problem via help-> troubleshooting information...
-
Do the photo album, date and time taken?
Just downloaded all my iPhotos to Photos from the old to the new iMac. All the old photos transferred with the intact title (date and time). How to activate this in Photos? Added some new pictures for the first time to Photos and may not know how to make the title the date and time the photo was taken (without manually typing in the date and time).
That s not a feature of Photos
Users contributed scripts to perform these tasks - Script: batch changing the title to the Date of Capture -or http://www.oldtoadstutorials.net/No.P01.html
LN
-
The update of the firmware bricked just my time capsule.
I followed the prompt to update the firmware today and I got a 'did not finish' message type. (I don't remember what it was because I just clicked on past)
'The airport' (which is my Time Capsule) is now Undiscoverable. I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.
Now, I'm stuck in a dystopian nightmare of the 1980s with all the promises of technology and yet none of its features.
Help! (I write from my phone. A device that I've recovered from the future)
I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.
If you Hard Reset the TC, it is normal that AirPort Utility cannot find the TC... given that AirPort utility displays only devices of the airport that have already been configured. The TC is not configured, so it's a Station of Base AirPort "nine" with the default settings.
Start over and set up the TC to help "Assistant" Installation of Apple on your Mac or your iPhone / iPad. After the back if you need some advice on this.
-
That the restoration of a backup time machine, a previous password change?
That the restoration of a backup time machine, a previous password change?
It could, if the last backup was performed before the change of password, and she understood this password file.
But if you are missing a password, see this article on the search for your password with the keychain:
Cess.html http://www.Macworld.com/article/2013756/How-to-Manage-passwords-with-keychain-AC
The fact that Time Machine does not have backed up prior to the change, or discarded a way to backup older you may have missed an opportunity to save, if you have changed it.
-
I just recently upgraded to OS El Capitan. Now, none of my movies to quicktime does not work. I have the old version of Quick time 7 and it does not work either. They do not convert. Help?
VLC will play them?
-
HWO to practice 2 gmail and facebook on the same firefox 2 with
not required for tipe the name and pass word time avery and keep them all openIn Gmail, you should be able to have several accounts at the same time, check the settings for Gmail.
See also:
- Multifox: http://br.mozdev.org/multifox/
-
Question
On the right of the adressbox, I always have Yahoo then Google, how can I solve that, I already delete Yahoo from the list in the box search, but every time I start firefox Yahoo is back. Thanks Ron Mijtelen ter, Amsterdam.Hi Ron,
Have you looked at article in the Knowledge Base using the search in Firefox bar? There are lots of good information in there. You happen to have an installed Yahoo! toolbar? You must disable or delete as well if you do. Try to start Firefox in Mode safe mode by holding down the SHIFT key while starting Firefox. If you have any problems using the safe, it's a matter of add-on or extension.
Hope this helps!
-
Is it possible to install the same recovery XP 2 times on 2 partitions
Dear people.
Is it possible to install the Recovery XP home 2 times on 2 partitions on my Satellite?
I want one as a desktop and one for music downloads.When I boot the second new system installed there say: installation is not complete, please reinstall!
Thanks in advance
What model of laptop you have exactly? As previous user written with former recovery media, it should be possible (I can't tell for sure) because the use of the expert installations you can choose the partition where the OS is to be installed.
If you have newer model cell phone with new software to recovery (RECO) something like this is not possible.
Maybe you are looking for
-
How can I get rid of a grid to follow up on my pages in safari?
See a grid of follow-up on my Safari pages, after I downloaded iOS 10.11.4 is 2 'x 2' box with a grid inside with the increase in numbers. What is - this and how it remove?
-
A patch prevents the system from starting. Windows Vista operating system
More than once, I am unable to boot. Frequently use must be taken at the beginning of repairs and restoring the system. The other day, that the following text is displayed: "A patch prevents the system to start."
-
BlackBerry smartphone email ICON HELP
Hi ive just got a torch after having a curve so I'm used to the blackberry format. However, I have the standard icon for text messages, which is great, so I the general message icon where all messages whether e-mails texts etc are in the same place,
-
I got my computer back on the first day and now I lost all my pictures how do I get those photos back From Internet Explorer Original title: C:\Users\%USERPROFILE%\AppData\Local\Microsoft\Windows Live Mail\Storage Folders\Deleted items
-
Backup of Windows 7 is not complete.
Currently, whenever I do a weekly backup of my Computer CQ5115uk, Windows 7 64 bit, a legend in the end shows that "backup could not complete. When I make an additional backup, it displays "backup." "completed, but some files were skipped. A repair c