Improvement of the basic Windows 7 scores; I need desperate help
I'm sick and tired of playing games (even 2d games) who hangs out on Windows 7 and not on any other OS.
I've disabled aero, update drivers, adjusted the display settings and tried a million ways to improve the basis of Windows 7 scores.
I'm stuck with a 3.1 and games is trolling like a miserable slug. Two days earlier, he jumped to 3.2 and I have seen a massive improvement in 2d games. (teas 2d games that need to run at 60 fps had prieviously ran to 20 to 35 pictures per second. After the jump for 3.2, they ran 40-50 fps)
Well now, they decided that they wanted to jump down to 3.1 and games act as slop again. I'm starting to become extremely unfortunate to have a Windows 7.
Help would be greatly appreciated.
Hi Smbmater99,
Have you tried to optimize the performance of the operating system?
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
I had similar problems while trying to play games like NFS, HALO 2 for Vista.
I could solve the problem of cleaning residue from register of older programs that I have not used or removed and the temp. locations.
You can also try to give it a shot.
http://www.RegCure.com/
http://www.Piriform.com/CCleaner
Note: do not forget to take before cleaning the residue of backup (when prompted).
After cleaning the computer, try to re - evaluate the Windows experience index.
Concerning
Terminator
Tags: Windows
Similar Questions
-
OK, so I deleted Facebook yesterday with the idea to reinstall later. He played a few times to the top and said: I can't reinstall it because I can restore it as it is in my archives. Whenever I try to restore it, he'd go to reinstall... in any case, I got rid of Facebook from my archives (after a few tries, to connect it to my computer and do it like that) so I will reinstall by click on reinstall, but that's the problem... Once it has downloaded, it will install again and this message is constantly "There was a problem during installation" I click OK and it is always uninstalled! It is VERY frustrating!
Any ideas?
Very much appreciated (BTW I'm new :/)
OK, the * beep * I'm just rendered account Facebook download of Blackberry App World is NOT the only way how to download Facebook... I went on facebook mobile!
Derr, sorry
-
Ok. I have a handle on my site with the publishing refresh in the browser. Yet to learn though. The printable tutorial does not seem to explain how to add layouts replacing / screens. It has been my intention add additional provisions / screens once the basic site became operational. Can you help me?
Please specify a little more than if you are referring to versions available phone/tablet of the site you want to add to your site from Muse.
These links would be useful:
http://helpx.Adobe.com/Muse/tutorials/creating-mobile-layout-designs-Muse.html
TS http://TV.adobe.com/watch/Muse-Feature-Tour/Adobe-Muse-Designing-for-Smartphones-and-table.
https://www.YouTube.com/watch?v=_Bq1hViogS4
Thank you
Sanjit
-
Improvement of the graphics component sub-score
Hello. I have a graphic sub-score of 3.3 on Vista. How can I improve this under-score? Buy new equipment/updated drivers updated?
Thank you.
Hello
Maybe a small improvement by updating the drivers
Control Panel - write device - graphics card - brand manager and the full model
Info - then double click it - pilot Tad - note the driver version - now click on set to update driver
(this can do nothing like MS is far behind the certification of drivers and even if it finds one it)
are likely even more recent on). Is it installed a new driver to REBOOT.Now, go to the site of the manufacturer of your system (such as Dell, HP or so away) and get the latest drivers - if
here - download - RECORD - go to the place where you-RIGHT CLICK - RUN AS ADMIN - Reboot
After all the drivers - who is your backup.Now do the same for the manufacturer of the device
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm--------------------------------------
You can also upgrade video card or processor (both on a laptop not) and adding
RAM could help depending on how much you have.SP1 and SP2 have additional performance gains.
How to increase game performance in Windows Vista
http://www.ehow.com/how_5248443_increase-gaming-performance-Windows-Vista.htmlWindows Experience Index - understand and improve your computer's performance
Windows Vista
http://windowshelp.Microsoft.com/Windows/nl-NL/help/0fee4637-8B21-41f1-87F6-66d2205420d61043.mspxRob - bicycle - Mark Twain said it is good.
-
Hello community. I get the following error for 10 Windows Installer to upgrade. It gets stuck he display of 0% to get updates. What happens whenever I ran the media creation Tool.exe file in my computer. Someone out there has experienced this problem and found a solution? Thank you in advance. Should I disable the Antivirus and Smart Firewall Norton Security? Thank you.
FATAL: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability
It's the whole error line:
2016-07-26 15:13:42:134 2992 200 Agent WARNING: has no rule Installed, updateId = {F9164872-3E27-4410-B4FC-038814549BB1}.105, hr = 80070490
2016-07-26 15:13:59:978 2992 200 FATAL Manager: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicabilityTry to upgrade manually:
-
Have Windows XP.
Windows Defender does not include Microsoft Security Essentials.
-
How can I reset my computer back to factory setting. I have just the Basic windows 7
my computer is slow, and I just want to delete everything off and reset back to factory. I'm still all disks that came with it
Page 44
http://support.Dell.com/support/eDOCS/systems/ins1545/en/SG/F123HA01MR.PDF
-
Windows 3 needs a video to play, codec media player how to locate and download the appropriate software to view the video
It has all the codecs you need.
-
I bought this computer a year ago, not just a gateway with windows 8. I rebooted the computer to the way it was purchased in the store. now he says that it cannot install the updates, it tries but said then failed, defeating the update. so since its done and I rebooted it, do I need to reinstall windows 8.1? Why would he do that? any help is appreciated, thanks
Hello NikkiMorris,
That your PC is almost a year old and you say it came with Windows pre-installed, 8 so, with you restoring back to factory conditions, you must reinstall the Windows 8.1 update.
While Windows 8, without the 8.1 update, updates some files, it will not full updates. To do that you need to completely upgrade Windows 8.1 I believe that Microsoft made sure that Windows 8 would update not fully to make sure that everything the world updated to 8.1 of Windows Update. Without the 8.1 update you can not access the full set of Windows Update to date.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
DeskJet f380 problem of driver for windows 7... need urgent help
Hello, im the owner of a HP deskjet f380 and has used without problems in Windows xp, it is practically new, because I bought a couple of months. I had an update on my PC and installed Windows 7 to go with the new system, and now when I try to install the drivers for your site... those for Windows 7 32 bit, I get a weird error message telling me that I am using a bad system, WIndows XP, to be more precise. I have checked and rechecked my installation of windows and I'm sure it's Windows 7, so I don't understan why I got the message. I even tried to install the package XP, thinking that maybe that will work if Setup, my Windows is XP. It did not work eighter, I started recieveing a few errors 'file missing' of some .inf files and some .dll which are missing or cannot be accesed. The problem is quite urgent so if you can send me it please with the solution I would me more apriciative. Thank you.
Hi Uuf11, the printer software installation is recommended in safe mode. Safe mode is primarily used to resolve problems with Windows by only running the bulk of Windows operating systems and device drivers. Once the passage in secure mode, the user can execute commands and charge the devices one at a time. So in this mode the print spooler service is not started which is essential for the installation of the software.
As suggested steps to come to your question did not work, you can try the steps below:
Note: The printer must not be connected to the computer before beginning the installation.
(1) perform a disk cleanup. Start ==> All Programs ==> Accessories ==> System ==> Disk Cleanup tools
(2) right click on the software driver that you downloaded and select "Run as" or "Run as Administrator". Enter the user name and password. This information is on your user profile on the computer.
Note: Make sure that the driver that you downloaded is supported for the OS you are using. If you have doubts redownload the file.
If the error persists, then:
1) click on the Windows icon in the bottom left of the screen of the computer and in the 'search' in a box type, %Temp% and press enter on the keyboard. This will open the Temp folder
(2) open the last file 7z
(3) double-click the file hpzsetup.exe
-
color of the Configuration window looks like the old version
Accidentally, I changed my theme to the Basic windows and it has messed up color settings. Now when I click on the color of the window, he goes to the old version looking for one. I used to be able to change my taskbar color (it was pink) and now I can't do anything for her, its just blue. can anyone help please?
HelloTry the Aero TroubleshooterHow to solve problemsClick Start, type Visual and then click on 'Find and Fix problems with transparency and other Visual effects.Follow this troubleshooter to see if that fixes the problem.If persistsUninstall and install the video graphics driver. check the issue.If still persistsjust a testcreate a new admin account and check the issueBest regardsNikhil -
Mixed language in the stop/restart/logout dialog and in the login window
Since I upgraded to El Capitan my shutdown/restart/logout dialog and in the login window appears in 2 different languages. My mother tongue is Italian, but I have a message in English.
My default language is System Preferences is Italian and that is not installed.
Try I'have:
In the menu bar, select
▹ System Preferences... ▹ Language & region
Deselect each language unwanted from the list and click OK. Then select your region in the menu of the region.
Close the preferences window. You may need to sign out and then sign back in before the change takes effect.
If there is no change, reset the PRAM.
But nothing!
Can you help me please?
Do you have other users accounts in your mac?
-
Photoshop Elements 11: PSE11 can operate in the 10 Windows?
PSE11 can work in the 10 Windows?
If it is helpful to you then please correct the answer here and also I told you even
Re: Window 10 supports Photoshop Elements 11, 13 and 14
Please do correct and useful
-
How to return to the starting window?
I installed PSE12...
Initially A window (I call it the start window) appears allowing you to choose to use Organizer or PhotoEditor... for some reason that I see an option to open the organizer at startup...
Now I don't know how to return to the Photo Editor...
Or how can I get back the start window...
Any help please? Thank you.
Use the top menu:
Help > welcome screen
-
Hi, since yesterday I noticed something wrong with FF, but first
I'm using windows 7, I have 8 GB of ram, ati radeon 5750 1 GB, i7 and FF is updated 4.01, and everything was just like 2 months old.So yesterday, I noticed that the policies suddenly began to look pixelated I googled a little bit and found that it was a problem in FF 4 beta and I don't either change something in "subject: config" or uncheck the Hardware acceleration, I tried, but the problem was solved only for a few minutes, or until I restarted FF even if the option is checked or unchecked, so I messed up with the "topic: config" but still nothing.
So I decided to use windows system restore, everything went well, and FF seemed to work very well.
But what is happening now...
http://i.imgur.com/txMp1.jpg
http://i.imgur.com/BXYvf.jpgThis is happening with the option checked or not and sometimes is all the FF window.
Thanks for any help
I had the same problem with Firefox
until I found the fix for this!
It's called Google Chrome!
Maybe you are looking for
-
How can I download a lot of songs
Almost all of my music is in the cloud. I want to download several thousand songs so I can sync to my iPod Classic. How can I download fr Massie without clicking on each individual song?
-
cannot drag and drop into the chat
I had used for a long time a very old version of Skype (3.8) without problem. Recently I have updated to the latest version, and now, I can't drag and drop files in a chat window. I still can select Conversation-Send-file, select a file and send it,
-
HP G72-B53NR: replacement internal hard drive used
OK, so my laptop been gave me my best friend 3 years. I don't know exactly on the side '' Hunt of water-with-cash '' society (which means that my funds are not enough to buy anything). Very recently, my laptop has been slow and slow. After a particul
-
I have Windows Vista Ultimate Edition, I want to go back to my Windows XP specialist, how then - I get in touch with Microsoft to send me a copy of my Windows XP Professional, I bought a lot of Microsoft, Katrina Distroyed my business and also home o
-
How can I adjust my mouse sensitivity?
I bought an Intelli Explorer 3.0 and I want to set the sensitivity of the mouse. But the sensitivity bar is missing from my mouse option screen. I went to control panel-> printers and other peripherals-> mouse and I don't have any pointers/buttons/Po