Improves the response time

Similar Questions

• improve the load time, or view the progress of the loading iOS app?

  Hello

  I have a 75 file ipa meg that takes about 30 seconds to load. Is it possible to improve the loading time or to show the progress of the load somehow?

  I am compiling with air 3.1

  I build my project with Flash Professional 5.5

  OK, I have an update that can be useful to others. This is probably common sense for many of you already... Here is my solution:

  1 table Push statements are very expensive CPU. Eliminate the 1500 of these shaved eight seconds off my boot time

  2. no device font text is expensive to load. Remove all my text vector and its replacement by bitmaps saved 10 seconds of boot time. This meant a major term in my program, but there are benefits to exercise more than the beginning of time.

  3. Turning off the coast of the compilation and the CFC option saved 5 seconds of loading time. Normally I would have this on so I can get better indicators of code inside Flash Builder. But in the last step, turning off saves a lot of startup time. I discovered this because I have a full and a lite version of my application (lite version had the swc compile option off, was much faster as the full version which had the SWC to compile on). For a few hours a day, I tried to understand why the lite version has been commissioning of 5 seconds faster that the full version even if the lite version had more assets.

  Start-up time full version:

  version 1.3:

  25.6 seconds

  version 1.4:

  2.5 seconds

• Get the response time data VI

  Hi guys,.

  I am trying to use CD get time response data VI my VI. When I choose the pair of input-output, I can get the response data determined by the digital input to the output value. However, I need more of a pair of response data. I try to use the list of input-output, but there is no output data and response time of the VI with table 1 d of numbers.

  My question is how to use the CD get time VI data response with the list of inputs-outputs configuration? Thank you.

  Hey, Shapiro,.

  I think the problem is you have two 0 items in the above table for you will be out this definition data twice. Let me know if this does not solve the problem for you.

• Get the response time more with First_Rows Hint.

  Hello
  I use 10.2.0.1.0 oracle version. I have a sql query that gives performance with cutting-edge FIRST_ROWS problem.     I expect the best response time with suspicion of "FIRST_ROWS (5)", but his is the worst, with use of a different set of the index, which is local to the partition. Please, help me to understand, the reason behind this change in negative execution path?
  

       First query gives all the ~3488 rows within ~1 minutes but the query with HINT is taking ~15 minutes for providing initial few rows itself. 
  For second one i am not able to get the exact and estimated cardinality stats , as it was taking lot of time for completion, so providing Autotrace plan only.
       
  Main Query:

  Published by: 930254 on October 15, 2012 04:55

  930254 wrote:
  Yes, Jonathan, in fact in the first case, i 'I' table is being analyzed using an overall index, but suspicion FIRST_ROW sound using the index that is local to the partition. resulting in the digitization of all partitions of 448. I think it's causing bottleneck. Is there something like: FIRST_ROW suspicion that affect this type of systematic index scan?

  In the first case the optimizer has unnested subquery of REACTION and used to bring to the table, I, and that's what dictated the choice of index.

  In the case of first_rows (5) decided that the range index scan will take adequate data if some time he chose a different index - running subqueries in the REACTION as a subquery for filter on each line. But it is the estimate of how long it will find adequate data (and how much time he will have to run the subquery to eliminate unnecessary data) does not.

  Concerning
  Jonathan Lewis

• How to improve the rendering time on MacBook Air

  Hi all

  Processor: Intel Core i7-4650U @ 1.70 GHz, 2.30 GHz
  Installed memory (RAM live): 8.00 GB
  System type: 64-bit, x 64 processor operating system
  Operating system: 8.1 Enterprise, 64-bit Windows (boot to the Windows partition with bootcamp, work is not as a virtual machine)

  Any ideas how to improve the rendering performance of a YouTube video that I created. I realize that the rendering is not ideal on a MacBook Air, however, there are free of RAM and CPU capacity according to the directives of the screenshot:

  

  For example, I put that he should leave 1.5 GB of RAM for other programs, but there are still 3 GB free.

  (FYI at 01:24 popped it up to 100% of the CPU)

  Any help much appreciated.

  Kind regards

  Ben

  This isn't a very powerful machine.  It is probably not much to do.

• How to speed up the response time of strike

  I used to be able to type quickly, but inadvertently, I changed something and now I can type only one letter a second.

  You may have held the right shift key for 8 seconds which keys being turned on, press "filter".  To check the filter keys:
  1. go in the-> ease of access control panel
  2. click on ease of access Center
  3. under 'Explore all settings', click on the "make the keyboard easier to use".
  4. on the brand of the keyboard easier to use"under"Make it easier to type", click on the box in front of"Turn on filter keys"to uncheck.
  5. click on the app and save buttons.

  Facilitate the use of the keyboard
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-keyboard-easier-to-use

  If that would not work in the case, it is a portable test removing the batteryand use your external power. See this thread:
  typing is slow, he can't follow.
  http://www.TomsHardware.com/Forum/49975-35-typing-keyboard-slow

• Problems with the response time of Vista

  I bought a Dell Inspiron Laptopn with Vista on 17/05/2007. Mine is the slower machine in the office, and despite a 3 GB of memory. I recently bought a Dell Vostro with Windows 7. Great job with the product "7". How can I update my Dell Inspiron with Windows 7, I'm really sick of the speed it fires.

  Also my IE crashes while browsing

  First of all, make sure that your computer is compatible with Windows7 to http://windows-7-upgrade-advisor.en.softonic.com/.  I, for example, can't be upgraded because of many devices that are not compatible (too many to simply be affected most upgraded).

  For Windows7 questions, please post on the Forums of Windows7 to: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Push the response time of application assessment Service

  Hello

  How long it takes to receive the credentials for the assessment of the Push function?

  I did a request 3 days ago and has not received anything yet.

  Thank you

  I just got the credentials if the answer is about 3 days :-).

• GPS vs V5 V6 slow response time

  I use the sample code in html5_geolocation_sample.zip.

  On a Bold 9700 running 5.0.0.714 version the response time to get a fix with enableHighAccuracy set to false is 3.5 seconds.

  On a Torch 9800 running the version 6.0.0.246 response time using the same code as before with enableHighAccuracy again set to false was 429 secinds.

  Has anyone encountered this?

  Any ideas on how to improve the response time?

  I am located in a major metro area in the United States less than 1/4 mile of a pylon.

  Thank you

  Seems to be a problem of carrier. When I switched to the use of enableHighAccuracy: true, I was able to get the response time for version 6 on the torch down to 10 seconds.

  I remember one of those Blackberry developer days one of the presenters mentioned that some GSM carriers do not support cell tower fixed well. I guess I know that one of them now.

• Satellite M100-165 - for the LCD Panel response time

  Hello.

  Anyone know where I can find information on the reaction time of my LCD screen on my M100-165?

  Does anyone know what is the response time LCD m100-165 (or m100 series)?

  Thx for replies :)

  Hello

  The M100 series was delivered with a display type 200 WXGA 14.1 LTN141W1-L03-0.
  To my knowledge this display should support a response speed of 25ms.

• DAC single sample write response time

  I use the acquisition of data USB-6259. I wrote a simple loop to write permanently a single sample of an output to check the next time of turing analog voltage pos & neg. I have the 'writing analog DBL 1Chan 1Samp' connected to a 'multiply by neg 1 "in a loop. I run the application, and it seems that the response time is about 3msec between +/-. It's far too slow for my application. My application requires constantly reading and setting of the tensions. I get a high sampling frequency if I'm out a waveform. However, I didn't go out a waveform. I went out a voltage in response to a voltage reading. Is it possible to have a shorter response time? Is there another method (using C?) to improve response times?

  Erik,

  Windows is deterministic up to 1 ms, so there is no way we could get this application in the field of speed you need with the current hardware.  I think that you could implement this with an FPGA, and we have many options available.

• High CPU and disk utilization slows down the response

  Two years, Pavilion dv7 - 2273ca running Windows 7 64-bit; Norton 360; IE8; Thunderbird; Microsoft Office 2007.  Tend to have several windows open at the same time.  For automatic updates

  Almost every day the laptop enters a period of very high CPU usage; often accompanied by high disk usage.  The response time of the laptop is compromised to the point that I often have to stop using it until activity slows.  I try to use the resource monitor, but do not know enough to say if the legitimate operations or something wrong.  Norton frequently shows svchost.exe and iexplore.exe as a heavy user of the CPU.

  Is this a normal behavior?  If not - any advice on how to identify the culprit?

  On the advice of a HP technician, I ran check disk, and then restore the system in August.  end hard drive.  System Restore did not difference in performance.

  Most of the processor have more of the base, there will be a CPU 0 and 1 for the dual core processors. Different colors are different carrots 0 and 1

  If you sort as I proposed that the highest CPU usage will float to the top, you have to watch it when your cpu pork starts to act up.

  The colors of disc are reading and writing, its hard disk is read or write data on the trays.

  A high utilization of the processor or disk can be considered normal at times, but should not go on constantly.and by dragging down the performance of the system

  Lets say you run a video in your browser, the CPU usage rises, running other programs can do the same thing.

  The disk activity can be high at times also, depends on what you do on the PC, but shouldn't be high all the time.

  http://www.TechRepublic.com/blog/window-on-Windows/learn-how-to-use-the-Windows-7-resource-monitor-for-effective-troubleshooting/3139

  http://www.PCWorld.com/article/241677/how_to_use_resource_monitor.html

• WebMonitor strong expression of mailBody response time

  Hello

  Please, help me to create expression for WebMonitor strong expression of response time mailBody.

  I got the expression for the availability of transaction webMonitor, I've pasted below.

  could someone please help me create a same response time?

  def message = "Page is not available. Cannot access the URL "+ scope.get("measuredObject/url") +". ";" "
  def httpStatus = null;
  def values = $scope #httpStatus # .values (scope);
  {if (values)}
  httpStatus = values.last ()?. GetValue;
  }
  If {(httpStatus)
  def httpStatusMessage = getWebMonitorHttpStatusMessage(httpStatus?.) (ToString());
  message = message & "HTTP status is ${httpStatus} - {httpStatusMessage}.";
  }
  message += "Please contact technical support.";
  return the message;

  Hi Vicky,

  Just try to understand what is missing from the message into the existing rule.

  WebMonitor Transaction Response Time Check rule

  has a variable of severity level of alarmMsg that references 2 other variables are variables rule.

  -alarmMsgPrefix rule variable named transaction - "high response time. "The response time of ${scope.measuredObject.name} of the transaction exceeds.

  -variable rule alarmMsgSuffix retrieves the response time

  def data = $scope #responseTime # .values (scope);
  responseTime def = 0;
  {if (Data)}
  responseTime = data [0] .getValue (.avg)? : 0 ;
  return "ms, current response time is" responseTime + "ms".
  }

  Golan

• Analysis of response time of NAM

  I have 2 small question:

  First: How Cisco NAM can calculate server, client and network responses while it is not the initiator of the traffic? It is based on the timestamps in data packets? All protocols put a timestamp in the header?

  The second question is: how NAM classify clients and servers? as I see the servers appear as a customer.

  Thanks in advance.

  Performance (IAP) intelligent application monitoring is a key feature that provides the Nam: an ability to measure the response time of the transactions between the client and the server.

  NAM monitors the flow of TCP packets between the client and the server and data response time to bring more visibility in time of response measures (ART) and the latency of the network.

  Next image will share more details:

  NAM request time response (it shows a representation of the total time of the operation as opposed to application response time)

  
  Transaction time / response time measurements (lists and describes measures ART measured by NAM)

  

  Possible NAM monitors conversation and the TCP packet flow between applications/server customers and where it grows the clients and servers.

  -Thank you

  Vinod

  To encourage contributors. RATE besoin.*

• SG200 - 26 [FW - 1.1.2.0]-very high response time: > 1000 ms!

  Hello

  Problem: New SG - 200 26 Smart Switch with the latest Firmware - very high response time 500-800 ms

  We have a router of EdgeMarc 4500 with 10 VPN tunnels at 10 locations of brach. SG-200 26 Smart Switch is connected to 7 servers (Terminal 2, SQL and others), all locations have 50 MB download and download 20 MB of Verizon FiOS Internet service speed.

  Depending on the tool Kulvik, the response time of this switch is around 500ms. At the same time, the response time of the EdgeMarc 4500 router is around 40ms and less.

  We have 60 remote desktop computers connected to our SQL Server database and 40 users of RDP via Remote Desktop. The configuration is the same for 3 years. But we change the switch HP 1800 - 24G of Cisco because of some failures of connection. For connection failures, we first think the old switch from HP, but it looks like problem with router EdgeMarc.

  This response time is normal? I have attached two screenshots of Switch Cisco and response time for the past 24 hours EdgeMarc router according to the tool Kulvik. Any other advice would be greatly appreciated. Thank you.

  Hello Srinath,

  Thank you for your participation in the community of support to small businesses. My name is Nico Muselle of Cisco Sofia HWC.

  The response time of the switch can be considered quite normal. Reason for this is that the switch gives CPU priority to its actual tasks that would be sure to pass, lists of access, VLANs, QoS, multicast, and DHCP snooping etc etc. As a result, the switch itself ping response time does not show in any way the good operation of the switch.

  I invite to try the rattling customers connected to the switch, you should be able to notice that the response time to customers are much lower than the response time of the switch itself.

  I hope that answers your question!

  Best regards

  Nico glacier

  Senior Network Engineer - CCNA - CCNA security