In an embarrassing situation

Similar Questions

• Is it possible to turn the dilemma 2 projects (.2qn file extension) in Adobe Captivate 8 projects? I tried to save the embarrassing situation in a text file, but Captivate wouldn't import correctly.

  Is it possible to turn the dilemma 2 projects (.2qn file extension) in Adobe Captivate 8 projects? I tried to save the embarrassing situation in a text file, but Captivate wouldn't import correctly.

  Hello

  I've never seen such a method. I think you will find that you must simply recreate your dilemma inside Captivate project and forget all means of import.

  The only thing that comes to mind would be to import the project dilemma in PowerPoint. (Assuming that such a thing exists) then import the PPT in Captivate. But you wouldn't be able to make everything connect.

  See you soon... Rick

• PowerShot SX720 HS how to find pictures and how to clear them?

  The manual does not seem to correspond to dials. After I took photos, how do I access them in order from the most recent to the least recent? Also, how can I remove them individually or in multiples? It was super simple with my Panasonic Lumix, but I've reached an impasse with the PowerShot manual. Thanks in advance.

  Thank you so much, John. It is useful to remember the complexity of such a device at the beginning of my transition between my Lumix long; and to be encouraged to make good use of the manual, even after that that it has mastered the basics and empties into an embarrassing situation. BTW, I chose the new Powershot compared to a new Lumix 'comparable' in part because the pop-up flash and partly to the reduction of the cost, not to mention some remarkable professionals reviews online.

• Why my internet accounts automatically get disconnected after that my computer turns off by itself?

  I have a Compaq PC with processor Dual-Core AMD Athlon X 2 5000, and it runs Windows Vista Edition Home Premium... In my view, that is running Service Pack 2. I use the computer to check my e-mail, my YouTube and Facebook accounts (and possibly other accounts spread I connect to).

  I usually use Internet Explore to browse the web. Sometimes my computer turns off by itself due to overheating. But whenever when this happens, when I turn my computer back on and return to the use of the Internet, I've totally frustrated to find that all my accounts were automatically disconnected!

  Even when I check these boxes to keep me connected to these accounts when I turn on the computer again after a successful stop, my accounts still get disconnected!

  It only seems to happen when my computer turns off by itself without stopping... mainly due to overheating. When I turn on the computer again after a successful regular stop, my accounts are automatically saved on once again, due to activate me "Keep me connected" by checking these little boxes. But after a situation when the computer is off all the time (either by himself for a reason, either by me with strength to turn it off when my computer crashes), my accounts do not remain.

  How can I prevent my accounts automatically be disconnected so that whenever I start the computer, after it turns off by itself, my internet accounts turned on? There must be a patch for this embarrassing situation here on the internet.

  Perhaps because an improper shutdown / forced can inpact on different parameters.

  Your must not PC in all cases be having heat problems, you need to fix this (heat) before it turns into something terminal

• Cloned credit card - can a virus have been responsible?

  Recently, my credit card has been cloned and the thief has exceeded the limit (involving us in a rather embarrassing situation in a restaurant in Livorno, but this isn't the question!) It was suggested that this could have been made possible by a virus on my laptop which has allowed the author to hack in and clone the card and also the same problem can occur with the replacement of the map well obviously all the information about it will have been changed.

  You have any suggestions on this subject?

  Hello

  Is this possible? If you have information on your computer, perhaps. However the most likely
  situation was that the map has been duplicated when you used it in a restaurant or perhaps other purchases
  where they can copy the entire strip for another card. The computer power off or even identity theft
  other ways your trash, a credit card can be cloned.

  --------------------------------------------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• SRP527W update?

  Hello

  I had the problem of blocking with the SRP527W (infact it's an extremely embarrassing situation after spending 4 x what I might have on a Netgear type unit, doing the same task).  I have yet to get their hands on the new firmware (MR3) that I have not received the email containing the link.  Can anyone here he provide for me instead?

  On another note, I don't know if this has been covered in other posts, but, when my unti stops working (wireless still alive, not internet)-hits of the CPU and stays at 100% and only a reboot will fix it.

  Strange - I received the copy of the notice.  Have you checked your junk e-mail filter?

  I will directly send you the essential.

  Andy

• VMware Fusion 2.0.5 out of suspense

  I put my VMware Fusion (windows XP) pending.  Now when I try to reboot, I get the screen of "Closure" of Windows.  repeated efforts and 'abandonment' Fusion of the side Mac and restart returns to the "off" State

  As best I can tell, the files in my application (DonXP) are in the place that I put in place as the location of the file when opening windows. This place is a LaCie external drive 256 GB HARD.  I have identified in the system as "VM - Etc".  The path for the files of DonXP's Machines/DonXP.vmwarevm VM-Etc/Documents/Virtual.

  In the past I always shut down Windows and quit VMware Fusion when stop the Mac. The other day, someone suggested that the suspension was more efficient and faster to stop and restart.  Following this suggestion, it's how I got in this embarrassing situation. How can I solve this problem?

  VMware Fusion Version 2.0.5 (173382); Windows XP SP 3. Mac OSX 10.5.8

  Well, suspension agent is certainly faster when you start, back up, and then a full stop, although it should not go through the motions of "closing windows", he should be blocked everything that was running in the guest when he is suspended.  It seems that something or other is still stuck...

  Suspended, you have no need to do that this either in the comments, just click the button pause when Windows is running and he's going to be suspended right where it is.

  To get back and try running, just turn off the Virtual Machine, this time.

  To power off, the equivalent of the socket by pulling on a physical computer, simply go to the Menu bar > VM > Power Off.  (You may need to hold down the 'Option' button if you see "Shut Down Guest" instead of "Power Off".

  Once it is off, you should be able to start normally upward.  Wait for Windows to start, then to try and hang it with the Pause button or the Menu bar > VM > suspend comments to ensure that it works correctly.

• How to put the non-repetitive field in an extensible framework?

  I have a formula field that creates the header of a list in an extensible framework. I seem to be in an embarrassing situation if - if I include the field inside the expandable frame header is repeated. If I put it outside, I get an error "field reference column to a frequency lower than his group. If I move the column of formulas at the request of parents it works except in the case where the child query returns no rows then I get the header with no data.
  
  So, I need to be a way to display the header within the extensible frame, but only once or I need a way to remove the header when the child query will return no rows.

  So, I need to be a way to display the header within the extensible frame, but only once or I need a way to remove the header when the child query will return no rows.

  You can try an idea. Keep the formula column in the option group, and create a more summary column as serial number for retail stores so repeating rather than setting this field (column of formulas) by repeating the image and use the PL/SQL code for this field as below...

  IF :serial_no = 1 THEN
    RETURN TRUE;
  ELSE
    RETURN FALSE;
  END IF;
  

  Then, it should display the first record only.

  -Clément

• MUTE button in ActionScript 3

  I have a flv integrated for progressive download and my own buttons control pause, play and replay, as in the code below, but I can't understand how a silent script volume knob. Any ideas?
  
  function startAgain(event:MouseEvent):void
  {
  NS. Seek (0)
  NS. Resume();
  }
  
  replayer.addEventListener (MouseEvent.CLICK, startAgain);

  Thank you very much. You are so helpful. Adobe documents that are not examples are very difficult to make sense.

  I got it all work and I am very happy. In case anyone else is in this embarrassing situation, I included a little more code, in which a button Alternatively mute volume Cup and allows volume. I used a clip with four different labels States/framework.

  What I discovered with AS 3, is that it is really very pleasant to use but the documentation makes it seem harsh and hostile to beginners.

• Text help to legend

  Hello Captivate gurus,
  
  I don't know if that's a problem, but I try to include a transparent text caption and it does not appear when I publish my project. I transparent captions throughout the project, so I don't know why this particular one does not work. I have two animations, 1 JPG and a button.
  
  My slide 7 seconds is as follows:
  1 JPG that is displayed on the screen of the length of the blade
  1 text caption transparent which is supposed to be on the screen the entire length of the blade (not listed do not)
  2 text animations (the one that is on the screen the entire length of the blade, and one that appears after 3 seconds)
  1 what we go to the next slide button (appears after 4 seconds and is suspended after 1.5 seconds; appears to the rest of the blade until someone clicks)
  
  I know that sometimes transparent text captions will not work with the buttons, but the button does not appear in my case even up to 4 seconds in the slide. The text caption is supposed to be there all the time. Any thoughts?
  
  Thanks for the help!
  
  Nicole
  
  One last thing - the caption text appears when I preview the slide, but not when the project is published.

  Hi all

  This situation has been send me heartburn, but I finally got it working. Here is a list of the things I've tried:

  1. I removed the button - still does not work
  2. I have reproduced the slide - still does not work
  3. I moved the text to a different slide box - still does not work
  4. I deleted the text box and insert a new one - still does not work

  What ended up working was taking an existing text box in another slide and editing the text. I have NO idea why this worked and nothing else, but be it. I really would have thought at least create a new text box would work, but it didn't. It was definitely an embarrassing situation, especially since you would think that its a simple task.

  Thanks for all your help!

  Nicole

• I have iPad Air and have never used my application pages. He now does not turn on and just displays "pending". The application does not open and I would like to download an application on pages to activate my use. How can I correct this situation, please?

  I have an iPad Air and have never used the app to Pages. For some time, it has not been enlightened and shows 'pending', but does not open. Now I want to resolve this situation. Any ideas, please

  Hello. It seems to be hung trying to complete the installation. You can try to remove and reinstall. To remove it, go to settings > general > storage > storage management. Expect that the apps fill, then on the Pages. You will see the used storage and a delete option. It allows to remove the existing copy. Then go to the app store, in respect of the purchase, you will see the Pages with a cloud beside her. Tap on the cloud and it should install again.

• When I boot FireFox on the Mac, the error message 'well, it's embarrassing... ' appears view full page on the Tools menu.

  When I boot FireFox for Mac (OS x 10.6.8), the error message 'well, it's embarrassing... ' back to PAGE VIEW covering the menu, tools, docking station, office,. Clicking on a 2 error message options 'restoration' or 'close' doesn't work. Since I can't access options menu under the eyes (and pressing 'ESC' does not display page, my only option is to force quit FireFox. I downloaded a cool FF program, but the same thing happens. How can I fix when I can't access the menu or tools, etc. ?
  PS. I'm going to use Safari to send this message.

  Well, it's boring.

  On Mac, command + shift + f should toggle the display between the ordinary and full screen. Does it work?

  If you can still access the menu bar, one of the Firefox settings file may be damaged. Try this, assuming you have the main toolbar:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • type or paste everything: in the address bar and press enter/return

  In the first table of the page, click on the button 'show in Finder '. This should start a new window listing the files and the folders.

  Leave this window open, switch back to Firefox and output:

  • "3-bar" menu button > button "power".

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

• datpiff may not broadcast on firefox, but on all other browsers, it's OK? It's embarrassing

  datpiff may not broadcast on firefox, but on all other browsers, it's OK? It's embarrassing

  check these links urself, they spread smoothly on chrome, etc.

  http://www.datpiff.com/pop-mixtape-player-2014.2.php?Mediaid=m24050af & TrackID = 6

  but firefox? Forget it

  The link you provided above also works on my Firefox browser. Maybe you do not have Flash installed or your version is perhaps obsolete.

  Please check if all your plugins are up to date. To do this, go to the Plugin Check site.

  Once you are there, the site will check if all your plugins have the latest versions.
  If you see in the list of plugins that have a yellow button to update or a red button update now , please put to update these immediately.

  To do this, click each yellow or red. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps in the installation process.

• Migrate to El Capitan in a dual boot Situation

  I have a Mac Book Pro 2011 with two internal hard drives.  (I got the optical drive, replaced by the second hard drive).  A reader has installed El Capitan.  The other disc has Snow Leopard.  I want to finish my transition to El Capitan while being able from time to time dual boot from the Snow Leopard disc in order to run some legacy applications.  Meanwhile, I have done work on "both sides of the fence" and do not want to replace or destroy data and applications that currently exist on the drive from El Capitan.

  Can I use the Migration Wizard to move most of the data and compatible applications since the Snow Leopard disc to the drive of El Capitan?  Or who will overwrite what already exists on the disk of El Capitan?  Or can / should I I manually copy data and applications from one disk to the other?  My end goal is Snow Leopard "skeleton" for legacy applications, thanks to the drive of El Capitan being my main boot drive.

  Hope this makes some sense.

  When I had this situation, I did a manual copy, so I would have more control over what was copied and where he went.

• The WiFi of my Airport is ready and cutting time another. What do I do pay to correct the situation

  The WiFi of my Airport is very ready and cut on the occasion. Do I pay to correct the situation?

  I have the same problem after updating to firmware 7.7.7! I noticed that I have a bad speed on WiFi, less than 10 Mbps and very unstable connection (with huge fluctuations). I ran a speedtest on cable connections, and here, I have more than 400 Mbit/s for download!

  Before the update, everything was fine!

  Any ideas?

  Thanks, Ionut