In Bridge CS6, the 'Tools' tab option is missing the "Photoshop", the image of batch process

Similar Questions

• Out of sync a station with the model of batch process?

  Hello

  My project has 5 test stations are run in parallel. I decide to use the batch process model because I want that they start and stop together. Next to startup and shutdown, I have some part in the need for synchronization of the entire test sequence. But in 5 stations, I want a workstation without flash sync to these steps. I tried to use the commands synchronize with the precondition, but it looks like that other stations are waiting for that one I jump the sync. My other option uses rendervous with number of parallel thread total is - 1. I test it and it works. But I still want to know if I can use batch synchronize step or not because it offers synchronization of start and exit synchronization.

  Thank you!

  NTT says:

  Doug,

  Thanks for your reply.

  I want to have something happening parallel with other threads, but without effect by steps of synchronization batch. I have several workstations parallel to the Assembly line. They are sync due to the pick and place. But I want to have a process is functioning as the station manager who keep track of USE between the train station and other site conditions such as pressure, temperature.

  Thang

  As a general rule, the intent of the TestSockets in the process templates is that they will have a 1 to 1 with DUT match, taking your 5th corresponds to an object to measure? In other y 5 DUT tested at the same time? DUT often need things like logging database or report generation. Your 5th decision-making requires the generation of reports? If not maybe this 5th Jack is really more than one thread of utility and creating a new thread or performance during execution makes sense for her. If your 5th instead making it really fits under test DUT in parallel enitrely separately from others the DUT then maybe you should start up a new run for the socket using the sequential model and just run as your other shots are running with the model of batch processing.

  So, it really depends on what you use this 5th station/thread to find out which method would probably work better.

  Hope this helps,

  -Doug

• Access to information USE testsocket in the model of batch processing

  Hello

  I have a custom reminder pre-batch TS 4.0, which fills in the serial numbers, part numbers, etc for the DUT being tested (using a model of batch processing). These variables are found in the pre-batch settings. However, I can't understand how to access these values further reminders (SequenceFilePostStepFailure, for example).

  In the pre-batch sequence, I can access the serial number for UUT4 using Parameters.ModelData.TestSockets [4]. USE. Serial number. But I can't find the object of ModelData when you don't the pre-batch and tried to look in the root, runstate, hand, sequence, etc., without a bit of luck.

  Any thoughts?

  Thank you

  Chris

  You can find it at:

  RunState.Root.Parameters.ModelData

  There will be only at runtime, and only when you actually run using the model of batch processing.

  Hope this helps,

  -Doug

• When I open Photoshop CS6, the image does not appear in Photoshop. The image IS open, i.e. the name of the file is displayed on a tab and the image layers appear in the layer panel. What is going on?

  Photoshop and Bridge is open as usual. But when I open an image, the image does not show in the area of the image. The image filename is show in a tab and the spectacle of layers in the Panel layer. What is happening and how to fix this.

  I solved the problem. It was somehow connected to my using Microsoft

  photos of theme. I put Windows to use the basic theme and the problem

  went. Thanks for the suggestions.

  HA!

• Add the menu item for the sequence of batch processing?

  Hello

  I created a folder level script that runs at startup of Acrobat. The script adds a menu item, that when clicked, calls another function.

  I wonder if I can create a batch sequence and add a menu item for that also? I mainly want to avoid going through the whole advanced-> processing statement->... Processing batch-> find the command sequence, and then click Run.

  I've seen a lot of examples for adding menu items that call the folder level scripts, but nothing about batch sequences. Has anyone already done this?

  Thanks in advance!

  You cannot create an element of a sequence of commands menu. Nearest you

  can get is to open the batch sequences window, using the execMenuItem()

  method and "BatchEdit" as the name of the command (I'm not sure that it is still

  the same in Acrobat X).

• Bridge CS6 do not generate correct thumbnails of RAW files

  I am running Bridge CS6 (the latest version, 5.0.2.4) on a MacBook Pro (OSX 10.9.1) 2013 and suddenly from now bridge is longer update thumbnails for my RAW files. All other images and video file formats have generated thumbnails, but not my raw files Nikon NEF including those I worked on ACR. I tried to purge all of the cache, restart of bridge and even restart my computer and always raw thumbnails are not generated.

  Any advice would be appreciated thanks.

  Eric

  In fact I just noticed that thumbnails for JPEGs will not be generated. A thumbnail is generated that if I'm working on a file in Photoshop and then save it.

  Make sure that you put free space of the disk cache.  You should have at least 15%.  For a ride from 700 free g 100 g.

  Have reset you the preferences?  Hold down the option key and launch bridge.  You will get a window to reset.

• Run the Photoshop Action of the bridge on the raw files without creating a folder JPG

  I created a Photoshop Action that resizes and compresses an image (at 800 pixels at 24% quality). I want to run that Action of bridge on a selection of raw files. I have to do this, the bridge, select the images and select "tools-Photoshop-Image Processor". "In the window options 'Processor of Image', I put the folder to save the images processed, check the ' Action run" check box and select the Action but I have to check one of the 'file Type' (I check '"Save as JPG' with ' quality: 1" ") (it will run only if a"file Type"is selected), then click on 'run '. It then performs the Action on each image and I get the desired resolution file reduced and reduced the size of the file. The problem is that there also creates a JPG subfolder and creates another set of files also to the reduced resolution but the file sizes are larger than the game created by the Action.

  How can I run the Action without creating the subfolder containing the extra set of files whose size size JPG?

  I use v4.0.5.11 Bridge CS5, Photoshop CS5 v12.0.4x32 and Windows XP Pro SP3.

  Thanks to anyone who can help me.

  Batch processing, see options for the dialog box:

  Delete the file Open Options Dialogs (prevents the dialog box camera raw of opening)

  Delete (optional) color profile warnings

  Under Destination set to None (the files are backed up to where the files specified in the save for web (export) step and close step on the farm in action.)

  

• News station using the batch process model

  Hello

  I have a test sequence using a model of sequential processes and station information by using the following, I.

  RunState.Root.Locals.StationInfo.StationID

  RunState.Root.Locals.StationInfo.LoginName

  I create a new test sequence that uses the model of batch process - when I try to enter the information Station data using the syntax above I get the following error

  Name of variable or unknown property 'RunState.Root.Locals.StationInfo '.

  Can some advice please if I go to the wrong place when using a model of batch process?

  Thank you best regards &,.

  Shane.

  Batch and parallel models you can access this information using:

  RunState.Root.Parameters.ModelData.StationInfo

  -Doug

• Include the results in "Batch report" instead of "report USE".

  Hi all

  I modified the ProcessSetup TS 4.0 reminder to perform a test of the preliminary material before testing 8 DUT using batch processing model. Since this is a reminder, the results are not registered by default, so I store it in a global table of results. Then I copy this table of results into my results MainSequence table.

  The problem is that this means that these preliminary results will be saved for UUT0 (if I use "A thread only" synchronization") or to the DUT (if I use the synchronization of batch processing model). How can I add my ProcessSetup test results to the "Results of the batch" section of the results page rather than the sections "USE results? The test checks the shared material and is thus applied to the DUT. I prefer not repeated it for each USE or make it look like, it applies only to WEAR it first.

  Thank you

  Chris

  Tomahawk,

  Al is correct that is whether you use HTML or ASCII report formats, you can override the ModifyReport... Reminders to get what you want. Unfortunately, with the XML declaration, you can use the ModifyReport... Reminders. In order to accomplish the functionality that you want to see everything and still use the report XML form, you will need to change the BatchReport reminder, as well as the XML style sheet you use.

  TestStand 4.2, we have created tutorials and provided better material for our XML Style sheets. With a little effort, I am convinced that with TestStand 4.2, you would be able to reach your goal.

  I suggest to take a look at customization of Style TestStand sheets of TestStand 4.2 help (available online). Unfortunately, Style XML TestStand 4.0 sheets do not have the same quality of literature as the TestStand 4.2 Style sheets, so you don't will not commented sections in the leaves of Style 4.0 as explained in the help.

  For this particular case, you do not want to change the reminder of BatchReport to store the data that you want to place in your report batch section. Then, you change the section batch report of the Style XML with XPath map appropriate to display these data in the batch report.

• change the format of the image

  Hi guys, is there a way to change the size of the output image? I can multiply the vector outCoord() with a factor to reduce the apparent output size, the resolution of the image does not change, so there is a transparent area under (and on the right) the new image. Here's my function evaluatePixel with a 500 x 375 image that I'm trying to halve...
  
  evaluatePixel()
  {
  Float2 sc = outCoord();
  If (sc [0] < = 250,0 & & sc [1] < = 187.5)
  outputPixel = sampleLinear (inputImage, float2 (sc [0] * 2.0, sc [1] * 2.0));
  on the other
  {
  outputPixel = pixel4 (0, 0, 0, 0);
  }
  }
  
  Is there a better way to reach the image resizing? I use PB 1.1.364221 build 01.Thanks.
  

  Quote:
  Posted by: mohyneenm
  Hi guys, is there a way to change the size of the output image?

  The answer to your questions is 'no', the length of average length response is "not inside the nucleus, but the application can ask for what output image size that he wants", and the long answer opens a Pandora's box.

  A Pixel Bender kernel not intrinsically knows nothing about the size of the images that is processed. Surprisingly only enough it's actually a good thing - a core is all about to do one thing - producing value of a single pixel in the output. He knows where that pixel in the output (via outCoord), but he does not know the size of the output image or the size of the image (s) of entry. (Can of course declare parameters and ask what application it runs with to get this information, but there is no built-in way to get all the information for inut images size or output).

  As an example of why it's a good thing, we can split the image into tiles if we want that (maybe get better use of cache) and get the same results in the transformation of the image at a time.

  There is a good amount of information in the Pixel Bender documentation related to this issue. I'll try and summarize some of them here. All images in Pixel Bender are supposed to be embedded in an infinite plane - for example, you can enjoy a picture of entry to all coordinates. In the case of images loaded from files (jpg or png) the images themselves are not infinite, so we declare that all the pixels outside the defined area are transparant black color. If you enjoy a pixel at the edge of the defined area you go (0,0,0,0) (assuming an image 4).

  An application is free to seek enforcement of any size image he wants, and he's going to get a picture of this size, however if she asks for a chance of huge image are the only part of this picture will be defined and the rest of the image will be transparant black.

  The region reasoning functions provide a way for a kernel to tell the runtime how the defined area will change after the kernel being run - take a look at the region of reasoning contained in the documentation. An application may choose to use the region defined as the area that is displayed. Your core which multiplies the coordinates of sampling by 2 to change the size requires also needed and changed functions to inform the system runtime on the changes in the defined area.

  As I said at the beginning, it is a complex issue.

• I could not migrate .pst files outlook to thunderbird.when I tried to import the Tools tab, all the options are greyed out.

  I could not migrate .pst files outlook to thunderbird.when I tried to import the Tools tab, all the options are greyed out.

  http://KB.mozillazine.org/Import_.pst_files

• I do not have the option 'combine files' in the Tools tab.

  I do not have the option 'combine files' tab in tools... what Miss me?

  Acrobat Reader cannot combine files.

• InDesign lack from the Tools Menu of Bridge CS6

  I use CS6 and indesign is not in my Tools menu. I checked the startup scripts in the preferences, and it is checked. I tried unchecking it and restarting, then check again and I also tried to reset my preferences when you start bridge. OSX 10.8.5 and bridge 5.0.0.39

  P.S. I think this should be an easy fix and something easy to get, but I looked for a long time and the only thing I found is the question from time to time. I have not found anything for CS6 and I have not found a solution.

  Hello, according to http://indesignsecrets.com/missing-the-indesign-contact-sheet-bridge-to-the-rescue.php , the function bridge of planks contact in the Tools menu has been removed to CS4 and is replaced by the output module.

• Bridge cs6 why pictures were poor quality in the preview full screen?

  Hello

  Windows 7 64 bit, bridge cs6

  Well I load 20mp or 22mp pixels photos, raw and jpg

  I select the pictures I want to watch and with the space bar, I'm going in the preview full screen

  but for adjustment on the screen, they look bad, I mean with no crips, no details

  but the pictures fullscreen overview 100% speed

  Why?

  y at - it an option to watch them adapt to preview full-screen with a high-quality form

  Thank you

  y at - it an option to watch them adapt to preview full-screen with a high-quality form

  In the Advanced preferences Bridge section, select 'Generate monitor-size previews' and recache the file (Tools menu, cache, purge for the folder cache

• Can't see 'Tools' tab on the Thunderbird window, to set the master password.

  I'm trying to create a master password to access the e-mail. The instructions say to go to 'tools' / 'options', etc. I don't see any 'Tools' tab on my Thunderbird window.

  ALT - T