In case of problem with my Apple Watch.
How to activate my Apple Watch? Won't turn on, won't charge. What can I do?
* it turn off by itself starts again.
* I try to reactivate it on the right button (Nothing)
* I try to load it (Nothing) was hot...
* change of cables (Nothing)
Apple Watch 2.2
Hello
Try charging your watch about 2.5 hours. When you reload your watch, check that:
- All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).
- On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
- The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
- Some docks of watch, brackets, cases or protectors might hinder it.
- You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
- If you reload your watch by plugging into a power outlet:
- Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
- Try to use different maps of the following:
- The real Apple USB Power Adapter that came with the watch, or;
- A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
- A third-party certified 5W (MFi) Apple USB power adapter.
- If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
- If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).
It is normal that for watching, adapter sector and charging cable become hot when it is connected to the power.
Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.
More information:
Check your battery and load your Apple Watch - Apple Support
Tags: Apple Watch
Similar Questions
-
Is anyone having problems with their Apple Watch since the iOS 10 came to life?
Is anyone having problems with their Apple Watch since the iOS 10 came to life?
Hello
If you have not already done so, it can also help update your Apple Watch to the latest version of the software:
-
I have a problem with my Apple Watch, when I use the watch on my treadmill, keep the phone, the number of step does not appear, the whole market is a waste if it shows only not on Apple Watch, how to solve this problem?
Hi Shabbir
Apple Watch has two integrated health and fitness apps: enforcement activity and the application of the workout. For best results, make sure your arms naturally swings while walking on the treadmill, as Apple Watch uses movement of arm (measured by the built-in accelerometer) to track and evaluate movement for indoor activities. If you use the application of the training session, your watch will also measure your heart rate continuously for training in order to estimate the calories burned.
Check that you have configured the application of the activity:
-Press the rings activity on your watch dial or open the application for the activity (if you have not set it upwards, you will be prompted to answer a few questions).
Also, make sure that the fitness of tracking is enabled:
-On your iPhone, in the application of Eve, go to: Watch My > privacy > Motion & Fitness > fitness monitoring.
You can improve the accuracy of the estimates related to activity in calibrating Apple Watch (take your iPhone with you on walks outdoors or tracks, connected to your Apple Watch and with location enabled Services - see the detailed instructions in the article to support below).
More information:
http://www.Apple.com/watch/health-and-fitness/
Use the activity on your Apple Watch - Apple Support
Use of the workout on your Apple Watch - Apple Support
Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
-
It's my second Apple Watch with the same problem. I'll send a picture off what it looks like. This watch is new today 21 February 2016 after I change my original I got on December 27, 2015
/Hello
This isn't a problem or an error. It is an intentional visual effect that is designed to repeat the contents of the underlying screen.
The effect appears every time that see you some screens that sit on top of the other, for example:
-For displaying Notification Center (dragging down when you view the screen of the watch face - like in your picture);
-For reading a notification;
-For the opening of eyes (by sliding upward when you view the screen of the watch face).
-By the use of Siri.
The underlying mirror not precisely the content of the display function. Instead, it adds a blur effect / ghosts.
If you want to disable this feature:
-On your iPhone in the app shows, go to: Watch My > general > accessibility - turn on / enable the setting to reduce transparency.
This setting stops the effect to be shown on the display of your watch.
-
How do you communicate with the Apple Watch
How do you communicate with the Apple Watch
Hello!
Welcome to the Apple community. I'm not quite sure what you mean when you say "communicate" with the Apple Watch, so I'll give you a few options that can respond to your request.
(1) the Apple Watch supports Siri, just like the iPhone and the Mac. To apply, simply say "Hey Siri" while the wrist is triggered, and your watch will respond. Alternatively, you can hold the digital Crown and Siri will be activated. As soon as Siri is activated, you can ask him questions such as "what is the weather today" or "reminder", or "Let's start a workout."
(2) you can manually send SMS via your Apple Watch by use of Siri, or opening the messaging app. That Siri send your messages, just say 'Hey Siri, send a text < name >' and Siri will open the Messages app and wait to talk to you about your message. If you want to move the Messages app manually, press the digital Crown and will take you to the home screen. In the home screen, select the Messages app (a green icon with a word inside bubble). Any existing message log must appear, and you can type on a given message log and choose to respond.
(3) If you want to place a phone call using your Apple Watch, you can say "Hey Siri, call < contact name >". If you have several numbers for a particular contact, Siri will ask you what number you want to call. You can also you can present a more specific request like 'Hey Siri, call < contact name >, < number >' with the number favorite is 'work' or 'House' or 'mobile' etc. So the demand go something like "Hey Siri, call Barbra, House".
If you are still at a loss, with regard to the types of orders that Siri will accept, you can always ask. Say 'Hey Siri, what can you do?' and she will give you a list of commands that she will answer to the.
If all goes well, I addressed your question. If not, please provide a little more information and I'll do what I can to help you.
Good luck!
-
How to unlock your Mac with your Apple Watch
Hello
How to unlock your Mac with your Apple Watch?
my mac: MacBook Pro (13 inch, late 2011) MacOS Sierra 10.12
I can not found "Allow your Apple Watch unlock your Mac" in security and privacy
Thank you
.
-
Your Mac has been unable to communicate with your Apple Watch
Hello
I don't know if someone else found this situation but I am not able to activate the function "allow your Apple Watch unlock your Mac" is enabled.
All devices are on the same Wi - Fi, all connected with the same Apple ID, password enabled on the watch, but still nothing.
I have the FileVault enabled on my Macbook Air. Does this influence
Hello
Verify that you followed all the steps here:
Automatically unlock your Mac with your Apple Watch - Apple Support
-
I can't unlock my MacBook Pro with my Apple Watch
Hi can someone help me?
I can't unlock my MacBook Pro with my Apple Watch im and using two-factor authentication
Hello
After the installation of macOS Sierra (which is due out September 20) on a Mac (2013 or later version), you will be able to unlock your Mac with your watch when your Mac wakes up from his sleep by following the steps detailed here:
-
Does anyone know if you can pair Bluetooth headset at the same time and heart rate monitor strap chest Bluetooth with the Apple Watch series 2? I can't find any info about it online. I hope so, because they have everything works without your phone now since it has GPS. Obviously a chest strap heart rate monitor gives you a more accurate reading. And who is running without music? If they want to really all the new capabilities of fitness improved series 2, that this is a must!
The original WATCH allows you to do this, so I don't see why the series 2 would not.
-
I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store
What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.
-
M using a 38 mm iwatch sportsman. CNT connect bluthooth headset. It is to keep looking but no new showng device. What should I do?
Hello
Check that you have set your Bluetooth headset in discovery / pairing mode (refer to the manufacturer's instructions).
You will find that you must first disable pairing your headphones for your iPhone (or any other device that they can already be coupled to) until you can pair it with your watch.
Also, make sure that you follow the instructions here:
It can also help, when you try to pair your headset with your watch, to move the two devices in a different location (away from any other Bluetooth device can be active) and try again it.
-
Whenever I turn on the tooth blue attempts to twin with a Apple Watch I don't have not one.
Whenever I turn on the tooth blue attempts to twin with a Apple Watch I don't have not one. I want to pair my blue tooth value head, but can't because he's too busy looking for a watch. Help.
read your manual of headsets, that the way that you put it in pairing / discovery otherwise mode it will not be found by your phone
-
When I send a message or call a contact with my Apple Watch, what message or free call? or I am paying it with my mobile plan?
Apple Watch is just an extension of your iPhone.
If you send a message or make a call, you would via the paired iPhone. Just as if you had sent the message to the iPhone or telephoned him with the iPhone.
-
When I do a race with my Apple Watch I don't have a frequency heart displayon the session screen. When I then sync my activity with my iphone there is also no average heart rate on the completion of my activity. How can I get my heart rate displayed?
Hello
Mode power saving can be activated.
To check this, on your iPhone, in the application of the watch, go to: Watch My > Workout - if it is currently enabled, disable power saving Mode.
(When the power saving Mode is enabled, it disables the sensor of heart rate during workouts running).
-
When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity
Example of
Stair machine 550 K/CAL
Apple Watch 30 k/cal
Hello
During a workout on the upstairs computer, record your activity using the app to drive on your watch, choose the stairs like the type of activity no. This allows your watch to use sensors and the data most appropriate to evaluate the results of your activity (including your heart rate, which is measured continuously during the training, when the training app using).
More information: use of the application of the workout on your Apple Watch - Apple Support
Maybe you are looking for
-
9.1 in el capitan not refreshing Safari top sites
Safari top sites on my iMac does not automatically refresh. I tried the R command and it did not work. Suggestions?
-
Hello I want to change the cd Writer to a dvd/cd burner in my 5200My prefernd writer is the NEC 6500 is that possible or is it an endless story of a lot of troubleThe writer before didn t UriPattern the original author, but I can live with it.Thanks
-
Hi all, as you can see it I already had a problem of not being able to download the new driver for my printer, but thanks to the forum its all sorted out. Now that I have installed the software, I would like to know if I can uninstall some of the fea
-
I need to create a completed chain so by 0x00 if the length is not met. sample length = 30 entry = 123456 should look like this in hexadecimal 0 x 3132 3334 3536 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 display or ' / '. 123456\00\
-
Lost access to the documents after restart
I had to reboot your computer due to hardware malfuntion. After the reboot, all the old data was recorded in a folder called my old programs. The computer has two user accounts. The two Adminstratotrs, one with password protection, the other without.