Satellite 5200 DVD burner

Similar Questions

• Satellite P100 - DVD burner and reader of SD card not recognized by Vista

  Hello everyone,

  I have improved my P100 of Xp to Vista and I can't make my DVD burner and my reder of SD (embeded to the laptop of course!) work.

  I can read CDs or DVDs, but I can't burn a DVD.
  My SD card reader in my device list but not appear in my browser!

  Even more, a 'mass storage' appears as not porperly installed but I have no reference on which device refer to the. Not to mention, I tried several times to install the utilities on the site Web of Toshiba sd but it didn't change anything...

  What laptop Satellite P100-xxx you have exactly?
  The number of extensions and model number would be very useful for further study

  Anyway. to get the card SD works in most cases you need to install the Flash Media driver
  In addition, it would be very interesting to know what SD card do you use.

  With regard to the Vista DVD burning issue;
  How have you tried to burn the DVD? Did you use special software to burn like Nero for example?
  Have you used different DVDs from different manufacturers of DVD?

  From my experience, it would be possible that the player manages all DVD. You try different DVD from different manufacturers. I had a good experience with TDKs

• Can activate a Satellite L40 DVD burner

  I recently bought a Satellite L40 (Vista Home) which came with a Pioneer DVD burner. The problem I have is that the player is currently disabled and that any attempt to activate the device fails.

  Can someone advise a solution because I can't use the drive as it is?
  Thanks in advance.

  What exactly do you mean by saying that the player is currently disabled?

  Have you checked the Device Manager and the status of the CD/DVD driver?
  Do you see yellow exclamation points?

  However, no matter if a yellow exclamation point appears or not, you should try to remove the CD/DVD drive device manager and must restart the laptop.
  Finally, the Windows operating system should recognize a new device and should reinstall the CD/DVD drive.

  Hope this short procedure will help you get the job of CD/DVD drive.

  I appreciate feedback ;) cheers

• Satellite 1730CDT, DVD burner replacement

  Hello
  is it possible to replace the CD with a DVD burner drive?
  This laptop does "cable select"?
  Guenter.

  Hello

  normally, you can only replace the existing by that same player, but you can visit http://www.toshiba-europe.com/storage and watch if a DVD burner fit!
  You need to know which drive you have!

  Good bye

• Of Satellite A200 DVD burner does not work

  The engraver of DVD of my Satellite A200-130 is not written at all. He reads everything and plays videos but it will not write anything even if the program, nero works and displays a message saying "burn successfully the process" in particular, but when you try to read the disc, Virgin sound.

  Is anyone out there who has the same prob as me?

  need help...

  Try to use it with the Windows option. For data burning, you don't need additional software.
  Can you use the format option and clear the contents of the CD/DVD-R/RW?

• For Satellite A30 DVD burner

  Hello

  I am looking for information on the replacement of my CD - RW Drive with a DVD - RW in my satellite A30 - I tried to google for the info but I'm bad - I've seen some info on the following model: Samsung TS-L532, would - did it or if anyone can help this disc if there is and where you can buy of?

  Thank you

  Simon

  The following readers must be compatible with the Satellite A30:
  -Matsu * a CD-RW/DVD-ROM UJDA740,.
  DVD-RAM UJ-810,
  -DVD-ROM SR - 8177
  -TOSHIBA CD-RW/DVD SD-R2212,.
  -DVD-R/RW SD - R6012

  But every player that is compatible, you can order the Tosh ASP in your country.
  I think the guy order parts directly from the Toshiba neighborhood and you can be sure that the devices are supported 100%

• Satellite C850D - DVD burning problem

  Four months ago, I bought a laptop C850D - 12 L to replace my laptop computer another death.

  A couple of days, I tried to burn on a DVD jpg files; I had not done this before on the new machine.
  Everything seems fine until she reach the finishing process and the disk does not end.

  I tried to fire using Windows own engraving option, Nero and I even downloaded Ashampoo Burning Studio, but whenever I get the same results, i.e. nothing gets burned on a disc. I wasted 12 discs already try all variants of files, engraving, programs, etc., but each of them fails.

  I don't think it's the drive, I think it's a software problem, because * I am able to burn files to a CD *. The player plays also bought the DVD shop so that the part of okay - it's just finish burned DVD that is the problem.

  I downloaded a few programs that may have affected things, (Nero was already on the laptop when I bought it), they are: VLC player and DVD Styler - I downloaded them only that Windows 8 has no creation of DVD as Windows 7 programs don't.

  I phoned John Lewis, where I bought the PC, but they were not able to help, nor were Toshiba, who said it must be a software problem and asked me if I would like to speak to someone else for advice, even if it would cost me. seeing that I have a two year warranty on it, I refused.

  Drivers from the DVD were dated 2006 and a search inside the Device Manager said that these are the latest drivers.

  I went to the website of Toshiba and found a zip file driver, which has been updated in 2013. I downloaded which, to reveal the ten files, three of which are uncompressed application files. I tried to run all three of the latter with no apparent effect. I even tried to search these files when you try to update DVD drivers in Device Manager, but he acknowledged not all ten driver files (mentioned above), even though I copied these to a more convenient location in My Documents folder.

  I would be grateful for any suggestions as to how I can solve this problem.

  Best regards, Martin.

  > I don't think it's the drive, I think it's a software problem, because I am able to burn files to a CD.

  I think you use not entirely compatible DVD disks.
  It was my problem burning DVD disc.

  Recommend test you the discs DVD-R from different manufacturers but I had the best experience using R TDK and Verbatim DVD R

  PS: Windows system using common Microsoft CD/DVD driver. This is why there is no special driver for optical disc player sound is always part of the system.

• Satellite A80 - DVD burner does not

  Hi all

  I have a portable Satellite A80 two year old. I noticed that my laptop DVD - RW is not able to read a CD/DVD. Its not able to write either one! It gives just the error "D is not accessible. The request cannot be performed because of an i/o device error? "My DVD drive is dead or is there another problem? Also, when I put a CD in the drive, I can see the lamp LED flashes for awhile and then it stays in place.

  Thank you!!

  Shashank

  Hello

  At first please can you us the CD/DVD device status in Device Manager? When you start your laptop, press F12 and please tell me if the CD/DVD device is listed there.

• How to reset the BIOS to resolve a problem with Satellite P100 DVD burner

  Hello

  I'm trying to reset my cmos to solve a problem with my dvd writer.
  I tried to run an old game I own and which was protected by starforce and ran starforce nightmare with a made the device completely unusable.

  After much research, I heard to reset the cmos.
  I have treid through debugging and nothing happened. I really don't want to open the laptop and remove the cmos battery or leave it for a month until the battery runs.

  Y at - it advice on what I should do.

  Could you please put more details on the model of your laptop and you CD/DVD driver problem? This will be useful for other suggestions.

  To be honest I don t think any reset BIOS, the RCT battery remove, etc. is possible or could help you.
  Only the ASP would be able to remove the TCR battery (if necessary what I don t think), but would not reset the BIOS like on the desktop PC!

  I appreciate feedback

• Satellite 5200-903d: unable to burn DVDs

  Hi, I have a satellite 5200-903d winxp sp2, and now when I insert a blank dvd, it appears like a full cdrom. Iused to use drag / drop and dvdshrink/nero with no problems. now, it seems to go through the motions of burning, but still left with a blank dvd. any help will be appreciated.
  regards bob

  [Edited by: admin December 17 05 08:54]

  Hello

  In my opinion, your DVD player is faulty. The position of the laser for reading and writing is not the same. It will be interesting to find out, you can watch DVD movies and if all DVD media can be read correctly. Try to remove the drive from Device Manager. Let the operating system detects the drive again and test it.

  I put t think you can do something.

• Satellite 5200 801: how to replace DVD burning drive?

  Hello
  A few days ago, I decided to replace my CD/DVD burning drive (burn DVD at 1 x) with a more faster and more modern.
  The problem is that, while turning on my laptop, it stops without any error message, as if she could not recognize the hard drive, so there is no professional Windows startup (problem of configuration master / slave?).
  I tried with two different burning drives and I also upgraded the BIOS of the laptop to version 1.40 (date 17/04/2003), but there was no result.
  Help me thanks
  Riccardo - Lecce - ITALY (South)

  You guessed it right,

  It's a question of master/slave/CS.
  Find out your old drive (firmware DI has something like 170) and try to locate the sense of them (current setting of M/S/CS) of it through the Internet on specific DVD player forums.

  Then determine WHAT type of disc, you will need to buy to make it work on your computer (or find the firmware suitable for do this... you'll need a different laptop that DOESN'T RECOGNIZE the DVD drive in the State, it is now).

  DVD Slimline portable computer readers usually do not come with a rider to make this adjustment (M/S/CS) on your own but are set with the internal firmware for this. There are other ways on how to get it to work (to force a shortcut on the back of the card), but I would not go for it if I were you.

  Concerning
  chain

• By Satellite Pro S300 uses double layer DVD burner

  Hello

  Sorry for my bad question, but I have a DVD burner double layer on my Satellite Pro S300?
  THX

  Hello

  Do you have your read the user manual?
  In manual mode, you will find information on the CD/DVD drives properties;

  Always is that the Satellite Pro S300 series was equipped with different CD/DVD drives
  TEAC DV-W28S and Panasonic UJ870 are readers of DVD super multi and support media Double layer + r.

  You can also find more information on the CD/DVD drives that are installed by using the Nero Burning Rom. There is an option that shows you all types of CD and DVD that is compatible with the internal SIDE

• S good for Satellite 1400-253 DVD burner need

  Could someone give me the part number for the Toshiba dvd writer/burner
  or offer any compatible dvd burner to fit one

  Computer portable satellite 1400-253 s (ide connection)

  Thank you

  Satellite 1400 is old model of laptop and it comes with several different optical disk drives, but none of them was DVD burner. Currently, these discs were not available.
  Due to this fact, you will not be able to find info on compatibility.

  If you need the list of compatible readers let us know but none of them is DVD burner.

• Satellite 5200-801 DVD-R/RW does not work!

  Hello
  I bought there are these laptop at least 2 1/2. I tried several times to get the DVD burning feature to work and was not wrong. Finally, a friend gave me a copy of Nero, and just like the other packages, I have used before, the system does not recognize the drive Virgin dvd - r.

  What could I do?
  Help, please!

  Thank you!
  Fidel

  Hi Fidel,

  I think that the 5200-801 use an optical drive Toshiba SD-R6012, who should be able to burn DVD-R and DVD - RW. It is possible that your player is not happy with the brand of blank media you're trying to use so I suggest you try a few different brands to see if it improves the situation.

  It is also possible that the device has a defect which is preventing them from actually identify the blank DVD when you insert it. Have you checked that the device will play pre-recorded media properly?

  Kind regards

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye