In case of problems

Similar Questions

• USB CODE 10 ERROR, complete the automatic entry in case of problem, problem keep after reboot...

  USB CODE 10 ERROR, troubleshoot automated, everything is OK, resart problem comes back after a reboot...

  What is the USB (type, manufacturer, make and model)? What version of vista are you using? The problem occurs if you start in safe mode?

  The following applies in some cases (I don't know if it applies to you but I don "t know the appliance, has no validation of the ccmplete and the message in its entirety (Word for Word), and I don't know if that's what you tried - but here it is anyway):http://support.microsoft.com/kb/933442/.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.  If this isn't the case, then when you have identified the device and answer the other questions, I have more specific recommendations.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CASE Installation problem on vista Home premium OS

  Hi guys,.

  I am facing the CAS(OCcas11.1.0-win64.exe) Installation issue on vista Home premium OS.

  The error I see is: "Check that you have specified the username and password correctly and the user has rights"logon as service""

  can you please suggest me how to bypass it and install it in vista home premiem OS.

  Thank you

  Hello

  You have created a user for the services of short?

  If this isn't the case, you must perform the services short as a specified user for which you can control permissions.

  Follow thw below doc for this step:

  https://docs.Oracle.com/CD/E55325_01/CAs.110/PDF/CASInstallGuide.PDF

  If you use your credentials to the system for this step, or you forgot credentials, then follow the below steps.

  Open Services' of all the Programs/Run.

  Right click on short service (CASE, HTTP, Tools) and got to properties.

  There, click on "Log On" tab and change the identification information; Restart all services.

  Most likely your change of tools and Framework service credentil will solve your problem

  Kind regards

  Prateek Gupta

• Page of Yahoo mail that says 'there a screen resolution problem". A in case of problems with all stakeholders, even all the browsers. The question is Firefox!

  I have the latest version of Yahoo mail. When I click on the link "mail" of my Yahoo homepage, he directs me to a page that reads, "There is a problem of screen resolution". In the body of this page, it explains how to fix the problem. BUT, I don't have a problem with the resolution - the screen resolution should be 1024 x 600 or greater and IT IS! This only happens with YOUR browser. I have Chrome and IE, neither of which is a problem. I worked with a representative of the yahoo mail support and he explains that it IS a problem with Firefox and for raise you awareness and fix the problem - I use a Vista operating system on a computer and Windows 7 on my other computer, which has the same problem, so we KNOW for sure, it's a Firefox issue.

  I don't think that the effects of this question all those who use Firefox because I'm able to visit Yahoo Mail without any problems. I would say that to reset the zoom of the page on the page, this issue occurs on. You can do these steps go to view > Zoom > reset or press (Ctrl + 0 (zero).

• In case of problem with my Apple Watch.

  How to activate my Apple Watch? Won't turn on, won't charge. What can I do?

  * it turn off by itself starts again.

  * I try to reactivate it on the right button (Nothing)

  * I try to load it (Nothing) was hot...

  * change of cables (Nothing)

  Apple Watch 2.2

  Hello

  Try charging your watch about 2.5 hours. When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  It is normal that for watching, adapter sector and charging cable become hot when it is connected to the power.

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• data transmission between the General case and problems of timing instructions using daq devices

  I'm currently developing a program using LabView 2012 SP1.  I am interfacing with an NI USB-6009 data acquisition using NOR-DAQmx 9.5.5f4.  I'm trying to get a voltage on the three analog inputs (AI0 and AI3 AI4) 1 second to start and 20 seconds of starting.  Three digital ports: P0.0, P0.1 and P0.2 are used to market the transistors for the signals in question and must remain high to the course of ~ 20 seconds the readings will take place.  After 20 seconds, I need to take the readings of each analog channel and the difference of the two to determine the delta at the start.  This delta will lead logic to implement later.  The attached VI has a while loop that runs on an interval of 1 second and a case statement that takes a reading DAQ at 1 second and 20 seconds (two separate trials).  The while loop stops after 21 seconds.  The question I have is how to manage the tensions of reading of the second 1 case and the second case 20.  I need to take the difference and the exit to the front after 20 seconds elapsed.  Please keep in mind when you answer that I am relatively new to LabView.  I have experience with several other languages (Matlab script, C, Java, Perl, etc.), but am still learning how to get concrete results in LabView.  That being said, guess I know nothing outside of what you see in this VI.  If you have any recommendations on how to implement more efficiently, I am open to suggestions. Thanks in advance for your help.

  RJ

  I would make the acquisition of 21 seconds of a value of data from data acquisition.  Then, you can index you want specific samples.  Have time to wire samples is much more reliable that Windows hope will be both properly 21 seconds.  It also simplifies the code in a bit.

• 95% OF MY UPDATES FAIL IT IS NOW CASE SENSITIVE PROBLEMS

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Programs that you have problems with all of THE UPDATES from MSN
  • CODE 646 error messages
  • Recent changes made to your computer no.
  • What you have already tried to solve the problem RESTART

  How this is related to Internet Explorer?

  Tip: Insert your Office CD in the Bay before the next attempt to install appropriate.

  Tip: If no joy, see if you can download the "fullfile" version updates viahttp://www.microsoft.com/downloads/ orhttp://catalog.update.microsoft.com/ and then manually install / them.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• TomTom home 2 in case of problems with vista

  I have windows vista family 32-bit premium, and Iam running IE8, after that I downloaded (TOMTOM HOME2) so I can receive all the updates for my navigation device, windows will run does not start at startup I uninstalled it all goes well no idea how to solve this problem or to make it compatible with vista because I need to have TOMTOM HOME installed so I can keep my device to update Thank you in advance.

  I have windows vista family 32-bit premium, and Iam running IE8, after that I downloaded (TOMTOM HOME2) so I can receive all the updates for my navigation device, windows will run does not start at startup I uninstalled it all goes well no idea how to solve this problem or to make it compatible with vista because I need to have TOMTOM HOME installed so I can keep my device to update Thank you in advance.

  Hey Alex400

  According to microsoft tomtom home 2.2 is compatible with vista

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=TomTom%20HOME&v=TomTom&UID=2&pf=0&PI=0&s=TomTom%20home%202&OS=32-bit

  Walter, the time zone traveller

• I would like to know some tips in case of problem, I tried to reinstall creative cloud. After that I installed Adobe Application Manager launched and there no sign of cloud creative app in my applications folder. I am currently reinsta

  I forgot to add I add I'm Mac based

  Hi Linda,.

  Please try to uninstall Adobe CC completely by running the tool of cleanup of CC from the help below document:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Once the withdrawal was made, please download the installer from the help below document and install:

  Creative cloud to desktop

  Kind regards

  Sheena

• When you try to use the clone stamp. a red part appears and the message saying it is a mistake and close photoshop, reopening the same case, no problem there is little time

  When you try to use the Clone Stamp tool, the screen becomes a partial red screen and a message from Windows saying that an error has occurred and close Photoshop.

  The same thing happens again after the reboot, ALL work is lost, this has happened only recently

  Hi all, thanks for your help, I went into preferences and disabled tick graphic, now everything is OK thanks Ben so

• In case of problems when you update of Cloud Creative applications.

  I'm currently updating creative Cloud applications now.

  But no matter how many times I put the adobe Creative Cloud login password.

  I can't go further and change it.

  I wonder if it is the correct password or do I need a different password update creative cloud?

  Thank you.

  I got it!

  Thank you very much.

• Case blackBerry Smartphone problem

  Hello everyne, I'm wandering what to do

  I have the blackberry curve 9300 3 with original blackberry case, but the blackberry has never acknowledged the case

  everything that I should try or should I contact my operator?

  François

  Yes, that's the case the problem I tried another and his works no problem! Ill try to post a photo of my case for future reference

• Firefox load any website in a proper way. It loads the wise online website. I'm not facing any problem with other browsers. Can you help me with this problem?

  Hello

  Firefox does not load any website in a proper way. It loads the website, but not in an appropriate manner. It loads in the good column.
  Another website are load appropriately.
  Can you help me solve this problem?

  Thank you

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  See also:

  • http://KB.mozillazine.org/Websites_look_wrong
  • http://KB.mozillazine.org/Website_colors_are_wrong

• The newspaper layout M & S money said temporarily disabled portal but no problem if I use internet explore

  The main page of M & S Money opens ok but then when I go to sign in page it says this temporarily disabled portal. This only happens when in Firefox

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Strange intermittent problem with macbook pro

  Hey there ppl.

  So, I have a Macbook Pro (15-inch, mid-2014, retina), processor i7 2.2 GHz, 16 GB of memory. Running OS X El Capitan.

  My problem is a strange, because it is only intermittently. ID say like 10-15% of the time. But its very frustrating and annoying when it does and because I am working on my computer (poker), it's also costing me. in any case, the problem usually occurs after I've been using the computer for 1, 5-3 hours or more. Usually ill be playing poker online, listen to spotify and use of the internet for stuff randomly. Everything will be fine and then suddenly ill notice that my mouse cursor will be suddenly shot through the screen occasionally. as ill be goes well with the cursor but it'll jump to the left, a couple of inches or more. Also bad note that some of my habit of 'clicks' record, so ill use the calculator for example and badly want to press 543 and maybe 5 records, but when I go to click on the 4 it does not work, and ill have to like wait a second, then click New to register the click.

  Also, if im typing something, as in poker, I have sometimes to take note of the way in which an opponent has played a helping hand or whatever, a letter or a space press custom register, so ill be typing a phrase and the space bar is and I'll have to press the key once the couple , then a letter will not register, etc.. Sound very disorienting and made it difficult to continue the task IM because it does not smoothly because of the LAG, unregistered, mouse jumping, etc.

  IM really not sure of what the root of the problem and what it is. Ive has run the malware anti-malware bytes, but that has not solved the problem. Usually when that happens ill try to restart the computer, or stop and return back but generally the problem persists. Then, after some time, maybe 20 to 45 minutes or so, when I try to use the computer it works normally with any of these problems.

  Very bizzare. Any help or insight is appreciated, let me know if you need more information

  Brandon

  Good afternoon brandonfrommililani,.

  Thanks for letting us know about the problem you are having with your cursor jumps erratically on the screen of your MacBook Pro.  The resources below provides some initial troubleshooting steps, you can try at this address.  I suppose that you work with the trackpad on your MacBook Pro.  In addition to the steps suggested below, try to connect a wired mouse to your computer to exclude Wireless interference.

  If your pointer is nervous when you use a trackpad, Magic Mouse or Magic Trackpad

  Best,