In Istore during the application update comes first it puts up-to-date but that after a day he again comes that I store for release on the same date that I've already updated.

Similar Questions

• 1 roll on the menu button is always a different color? How to get the bread during the same on all?

  I'll put in place the menu button in again after you configure the menu in Photoshop

  and for some reason, that activate and select button is different that the other 5 buttons in the Menu color set the colors that appear on the odd button are not yet in the Menu color set as a choice

  I tried several times without success

  The group is the same on all (= 1)

  any ideas on what this could be?

  Thank you

  Mark

  Figured it out through every button in the Properties tab

  For some reason any '4' has been on group 2 in the highlighted area

  Thanks for watching :-)

• How can I get Microsoft to "Unlock" my product key for Windows 7 genuine teacher that I reinstalled during the same version?

  I had some problems with my Windows 7 Professional 64 bit program... some files were in conflict with the other PGMs, some were missing... my "Recover" feature would not work even when I tried to start the computer.  Then I reinstalled the program, such as an update, non-personalized, because I didn't want to lose my programs, etc.  Installed everything, but he blocked my product number... it wont let me validate windows now.  It is a genuine version of windows, I used it for over a year, it just wasn't working correctly, now it doesn't let me activate it!  Error 0xCoo4C003.  Can someone help me?  If I reinstall as "Custom" I can use my product key... that's the one that came with this version, when I bought it.  Help, please.

  Windows product ID: 00371-220-3347065-86787

  The ID of the product - 220 - indicates a not for resale MSDN account. If you are not the account holder and you bought it in a box at retail, the box and its contents is counterfeit.

  For more information, see this:

  http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285

  To see how these counterfeits are more, see:

  http://www.YouTube.com/watch?v=hzqNNiOM0cs

  You can buy a legitimate windows from a legitimate retailer.

  Office status: 103 blocked VLK
  Microsoft Office Professional Plus 2007-103 blocked VLK

  Office is also not authentic

• Media Center crashes since update k2502898 has been cancelled during an automatic update

  Media Center crashes since update k2502898 has been cancelled during an automatic update. The cancellation took place on 03/10/2011. Since that time MC opens, then when I click on TV > Live it hangs or does not detect the tuner. Other times it opens, but after a few minutes I can't change channels or use Rarely MC. It works OK.

  I tried to find an answer in the forums but nothing. One day I came across a hotfix package for KB2502898 file 1.0.0.0 version. After installing MC works sometimes. When it does not work I have to install this hotfix package and restart the PC each time until finally it works.
  Since March, 2011, there is also a problem with the GUIDE. Its download is interrupted (probably because MC broke down). Manual download does not work. Even when MC works (after downloading the hotfix package), the guide does not download.
  My PC is regularly updated and protected.
  The version of Windows XP Media Center Ed 2005 is 5.1.2715.3011 (xpsp (wmbla). 061009-1511) Update Rollup 2 with microsoft.NET Framework1.1
  My system is Microsoft Windows XP Media Center Edition Version 2002 Service Pack 3 - Reg nr 76487-0EM-011903-00824
  Could you please help me solve this problem.
  Thank you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2502898-fails-to-install/0da54a82-C14C-E011-8dfc-68b599b31bf5

  Does that help?

• Install more than one exe to a folder or in subfolders of the same folder

  Hello!
  I want to do at least one of the following conditions:

  1. I want to install several exes (built with LV app builder) in a directory because they go hand in hand.
  2. make several subfolders under the same top-level folder EAT install exe in each of them.

  (Upper level) should be the folder of "society". The subfolders are for applications.
  For example:
  c:\company\app1\app1.exe
  c:\company\app1\app1setup.exe
  c:\company\app2\app2.exe
  etc.
  This can also be in the folder "program files".

  If I try to do, I have a few problems of implementation of the construction specifications. If I have more than one generation standard for the exe I can't add in the same folder. At least if they contain the same external files, such as DLLs.
  If I try to do by exe installer, I get an error message telling me that the same folder (my "upper tier") already exist in the registry and cannot be added again. This is also true if I try to do a new project instead of having to install several specifications in a project to build.

  I use Labview 2009 (engl.) Windows Vista (in German).

  If someone has a help for me or similar encounters problems please let me know.

  Holger

  Ok

  for the records: I found out what was the problem (and the solution).

  Both my needed apps the same external DLL. While this should be no problem it caused the new Builder installer/app and me the headaches. The new app Builder seems to build its internal paths in the registry. If you select more than one target of generation 'exe', he gets into trouble if more than one using a subdirectory 'data' with the same DLL and each subdirectory using the name of 'data' of sugested.

  The solution is simple: just give each target generation "exe" a subdirectory 'data' different like data1, data2 etc. and the problems disappear.

  Holger

• the Motorola Cliq Backflip prices are essentially the same.

  I ask this question because the phones look different physical, but the operating system (1.5) and the MotorBlur are identical and from what I've seen of the plug the same processor powers the. So if a Motorblur upgrade is the version for the Cliq why cant it be used on the Backflip and the big question is why Andriod 2.1 being little to be communicated for the Cliq cant it be also realease and used on the Backflip during the same period. I mean even though AT & T said OTA would be of a large part of their network to download from the site of Motorola and the rom update via a pc connection (as we are used to in the old days) should not be a problem. Anyone who thinks that or is it just me?

  Cliq will be T-Mobile branded and Backflip will brand AT & T. 2 different firmwares. We're stuck on AT & T calendar. If the Backflip has rooted, then you could install vanilla 2.1, but I don't think it's possible again.

  It is confirmed we will get 2.1 (AT & T version I'm sure), but it takes longer.

• Created a form of the ADF since a human task - how to get other human tasks use the same form ADF?

  We are new on the forms of the ADF and we have a simple workflow with a few different human tasks.

  The task of the initiator, I right click it and automatically generated a form of the ADF.

  The rest of the human tasks have the same payload, and I want just the other human tasks use the same ADF form I've already created. How can I do this?

  Thank you.

  Yes, there is a way to reuse the shape of the ADF and its workflow for several human tasks as long as the payload is the same.  To do this:

  1. Open the file "hwtaskflow.xml" inside your project of the ADF.  It will be difficult to read when you first open it so right mouse click the xml file-> select "reformat".
  2. Copy the 6 lines with the element with the form that you want to reuse-> pick up the 6 lines in the file under the rows that you copied.  The and elements in the text that was copied just need to be changed from the old human task name (for example, ".../MyHumanTaskOriginal") on behalf of the human recycled news of the task (for example, ".../MyHumanTaskReused").  Don't forget to leave the text in the and items of value to their original name.
  3. Redeploy the project.

  Dan

• A Question for the Experts of the SAMS

  Hello
  
  Version Oracle 10.2.0.4
  16 k block size
  I have a managed tablespace locally, with volume of uniform measurement of 128 k and SSM set to AUTO. My tablespace is called rj_test_X128K in the following test:
  

  dba@TEST> create table dba.rj_del_ins_test
    2  tablespace rj_test_X128K
    3  as
    4  select *
    5  from table
    6  where PK_COL > 1135268669
    7  and PK_COL is not null;
   
  Table created.
   
  dba@TEST> exec dbms_stats.gather_table_stats('dba', tabname=>'RJ_DEL_INS_TEST',estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE 1', cascade=>TRUE);
   
  PL/SQL procedure successfully completed.
   
  dba@TEST> select TABLE_NAME, FREELISTS, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, AVG_ROW_LEN, NUM_FREELIST_BLOCKS
    2  from dba_tables
    3  where table_name = 'RJ_DEL_INS_TEST';
   
  TABLE_NAME                      FREELISTS   NUM_ROWS     BLOCKS EMPTY_BLOCKS  AVG_SPACE AVG_ROW_LEN NUM_FREELIST_BLOCKS
  ------------------------------ ---------- ---------- ---------- ------------ ---------- ----------- -------------------
  RJ_DEL_INS_TEST                                84217        868            0          0         141           0
   
  dba@TEST> delete from dba.rj_del_ins_test
    2  where PK_COL > 1135268669
    3  and mod(PK_COL,20) = 10;
   
  4143 rows deleted.
   
  dba@TEST> commit;
   
  Commit complete.
   
  dba@TEST> exec dbms_stats.gather_table_stats('dba', tabname=>'RJ_DEL_INS_TEST',estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE 1', cascade=>TRUE);
   
  PL/SQL procedure successfully completed.
   
  dba@TEST> select TABLE_NAME, FREELISTS, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, AVG_ROW_LEN, NUM_FREELIST_BLOCKS
    2  from dba_tables
    3  where table_name = 'RJ_DEL_INS_TEST';
   
  TABLE_NAME                      FREELISTS   NUM_ROWS     BLOCKS EMPTY_BLOCKS  AVG_SPACE AVG_ROW_LEN NUM_FREELIST_BLOCKS
  ------------------------------ ---------- ---------- ---------- ------------ ---------- ----------- -------------------
  RJ_DEL_INS_TEST                                80074        868            0          0         141           0
   
  dba@TEST> insert into dba.rj_del_ins_test
    2  select *
    3  from table
    4  where PK_COL > 1135268669
    5  and PK_COL is not null
    6  and mod(PK_COL,20) = 6;
   
  4277 rows created.
   
  dba@TEST> commit;
   
  Commit complete.
   
  dba@TEST>
  dba@TEST> exec dbms_stats.gather_table_stats('dba', tabname=>'RJ_DEL_INS_TEST',estimate_percent => 100, method_opt => 'FOR ALL COLUMNS SIZE 1', cascade=>TRUE);
   
  PL/SQL procedure successfully completed.
   
  dba@TEST> select TABLE_NAME, FREELISTS, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, AVG_ROW_LEN, NUM_FREELIST_BLOCKS
    2  from dba_tables
    3  where table_name = 'RJ_DEL_INS_TEST';
   
  TABLE_NAME                      FREELISTS   NUM_ROWS     BLOCKS EMPTY_BLOCKS  AVG_SPACE AVG_ROW_LEN NUM_FREELIST_BLOCKS
  ------------------------------ ---------- ---------- ---------- ------------ ---------- ----------- -------------------
  RJ_DEL_INS_TEST                                84351        911            0          0         141           0

  I noticed that the number of blocks increases even though I'm only insert additional lines very little - 134 to be exact. Using the length of middle line of 141, which takes me to 134 * 141 = 18894bytes; a little more 1 block. I have an increase of 43 blocks. No idea why?
  
  I understand that there is a general fresh management regarding the use of space when you use SAMS, but I don't understand why there is such an increase in the number of blocks when I would have thought that the blocks were already allocated in the initial table creation phase. If I had inserted thousands of lines, I would have understood the jump in the use of block, but not with 134.
  
  Here are the results of the DBMS_SPACE. Procedure SPACE_USAGE
  

  UNF         0
        UNFB         0
         FS4         0
        FS4B         0
         FS3         0
        FS3B         0
         FS2         0
        FS2B         0
         FS1         2
        FS1B     32768
        FULL       891
       FULLB  14598144
  FS1
   Number of blocks that has at least 0 to 25% free space
  FS1B
   Number of bytes that has at least 0 to 25% free space
  FULL
   Total number of blocks that are full in the segment
  FULLB
   Total number of bytes that are full in the segment

  I used the DBMS_SPACE. Procedure UNUSED_SPACE and got these results:
  

  TOTAL_BLOCKS    912
  TOTAL_BYTES        14942208
  UNUSED_BLOCKS   0
  UNUSED_BYTES    0
    LASTEXTF      251
   LAST_EXTB      909
  LASTUSEDBLOCK   8
  
  Definitions taken from the docs:
  
  total_blocks
   Returns total number of blocks in the segment.
  total_bytes
   Returns total number of blocks in the segment, in bytes.
  unused_blocks
   Returns number of blocks which are not used.
  unused_bytes
   Returns, in bytes, number of blocks which are not used.
  last_used_extent_ file_id
   Returns the file ID of the last extent which contains data.
  last_used_extent_ block_id
   Returns the starting block ID of the last extent which contains data.
  last_used_block
   Returns the last block within this extent which contains data.

  Following this, here is how the stats are the deletion and insertion, shown in two steps:
  

  ##############
  # After deletion
  ##############
  
  FULL      850
  FULLB     13926400
  
  TOTAL_BLOCKS              872
  TOTAL_BYTES             14286848
  UNUSED_BLOCKS           4
  UNUSED_BYTES            65536
  LASTEXTF                 251
  LAST_EXTB            869
  LASTUSEDBLOCK            4
  
  109 extents
  
    NUM_ROWS     BLOCKS
  ---------- ----------
       80074        868
  
  ##########
  # After Insert
  ##########
  
  FS1              1
  FS1B          16384
  FULL            892
  FULLB           14614528
  
  TOTAL_BLOCKS              912
  TOTAL_BYTES             14942208
  UNUSED_BLOCKS           0
  UNUSED_BYTES                0
  LASTEXTF                 251
  LAST_EXTB            909
  LASTUSEDBLOCK           8
  
  114 extents
  
   NUM_ROWS     BLOCKS
  --------- ----------
      84351        911

  So, can someone get to explaining why this is happening?
  Or maybe some additional tests I can do to see what blocks are used for?
  
  Thank you
  SoC

  Rob_J wrote:
  As you can see, TEST 2 shows that, when you use the representative settings for PCTFREE and PCTUSED in MSSM to those of the SAMS, we get a result comparable to the use of SAMS.

  So, regardless of what I set PCTFREE to SAMS tablespace in a block must still have more than 25% of free space to be a candidate for the new pads?

  Not exactly - I think it is the next "Freeness" below PCTFREE, so if PCTFREE is for example 26%, then the block must have at least 50% free for its status as a 'FULL' erased and become a candidate for inclusion. PCTFREE under 25, Yes, then at least 25% I guess.

  Is it possible to change this behavior is this just a call, you have to take for the use of SAMS or y at - it a logical reason behind what I missed?

  Well, I guess that's what you get with segments 'AUTO' managed by magic - if the theory is correct, you can try a PCTFREE of 24 or 25 (not sure of the border), then several blocks should become eligible for the status of compensation when deleting lines. Of course, it's different from what you can achieve with MSSM - you are reserving more space for the growth future line with PCTFREE 25.

  Remember that the default PCTUSED is 40 for MSSM if you do specify not her - so the default behavior of the SAMS with 10 PCTFREE is already more aggressive towards provision for blocks compared to default MSSM insertions.

  You must also consider that SAMS was designed especially for the systems highly concurrent OLTP (and CARS) which deals, so there are many other considerations to take into account, as the way in which SAMS affects free to the various processes blocks and restraint potential reliefs on the segment header (similar to the use of FREELISTs and FREELIST groups with MSSM).

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  Co-author of the forthcoming "OakTable Expert Oracle practices" book:
  http://www.Apress.com/Book/view/1430226684
  http://www.Amazon.com/Expert-Oracle-practices-database-administration/DP/1430226684

• 9i and 10g on the same machine

  I want to have Oracle 9i and 10g on the same machine. I have already installed 9i. Oracle 9i home is (/ opt/oracle/920)
  I'll put oracle new home for 10g (/ opt/oracle/10). that works perfectly. and what changes I will make to the PATH variable so that I can use both versions.
  
  or will I do a new oracle 2 user and perform the installation of 10g with it.
  
  
  Thank you
  
  Khurana

  I say you're wasting your time as such a script already exist and is called "oraenv.

  Just
  export ORACLE_SID =...
  Export ORAENV_ASK = NO
  . oraenv
  Export ORAENV_ASK =

  and you're done.
  Working for more than 10 years!

  If I could study how much time is wasted by people invent their own hacks, simply because they refuse to read the documentation, I would start tomorrow student!

  ---------
  Sybrand Bakker
  Senior Oracle DBA

• Error code 80070424 during the application update the window and installing the Apple Application Support

  Hi guys,.

  I am running Windows Vista Premium Home 64 bit. This all started when update me my iTune recently and since then it has been a headache after another. Basically, when I try to install iTune, it says that I need to install Apple Application Support first, and when I do that, I get the following message appears:

  "An error occurred during the installation of assembly"Microsoft.VC80, CRT, Version... ". "and it lights up.

  In addition, I also tried to install Vista SP 2 recently but my window update also gives me a pain. I can't get the update because when I try, it says 80070242 error code - Windows Update encountered an unknown error.

  Here are the pictures of the 2 filters:

  • The problem of Apple Application Support
  • The Windows Update error screen

  Any help at all would be greatly appreciated.

  Thanks for the suggestion of Augustine, but the problem is still present. The order went through, but I always feel error 80070424 and is possibly due to a malfunction of Windows Installer Module.

  Thanks for the attempt. Appreciate it.

  Suggest you check to see if the Windows Modules Installer service is present, has not been disabled and can be started.
  Right click the computer on the desktop or the Start Menu and choose Manage
  The UAC prompt to enter a password if one is used, then click on continue or Yes.
  If no password is used, click on continue.
  Click the arrow next to Services and Applications
  Click Services in the left frame
  Scroll down the list of Services in the context of e right until you come of Windows Modules Installer .
  If it is present, check under Startup Type to see if it has been disabled.
  The default setting is manual.
  At the top left will be a link to start the service
  Click on it and see if the service can be started.

  If the installer of Modules of Windows is disabled, right click on it and choose Properties .
  Set the startup type to Manual , click on apply, OK.
  Close the computer management console.

  If the Windows Modules Installer is not present and of Flavius are too difficult for you to follow, then replace
  Contact MS Support free of charge.
  Start here
  Make a mark next to "I use it for my own personal use.
  Now click on the button continue.
  Click on the I accept"" button.
  Support options will be displayed. The only option I see here is for email support.
  Click on the button continue to access the support request form.
  Fill in the fields and then click on the button continue.

  MowGreen Services consumer safety update

• Get means during the updating of our application

  Hi Experts,
  
  When we update our application which is a heavy EAR file, we get the following errors in the logs. But the same applications work well when deploy us for the first time why it's happening we have enough space in RAM we always get this error and when we reboot our server it works again for some time.
  
  [[Path of the module: jccrbxt ServletContext@16428923[app:jccrbxt: / jccrbxt spec-version: null]] Root cause of ServletException.
  means: PermGen space
  at java.lang.ClassLoader.defineClass1 (Native Method)
  at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
  at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:328)
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:285)
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253)
  at weblogic.servlet.jsp.JspClassLoader.findClass(JspClassLoader.java:48)
  at weblogic.servlet.jsp.JspClassLoader.loadClass(JspClassLoader.java:33)
  at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:531)
  at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:281)
  at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to org.springframework.security.util.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:378)
  at org.springframework.security.ui.basicauth.BasicProcessingFilter.doFilterHttp(BasicProcessingFilter.java:174)
  at org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
  to org.springframework.security.util.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:390)
  at org.springframework.security.ui.AbstractProcessingFilter.doFilterHttp(AbstractProcessingFilter.java:277)
  at org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
  to org.springframework.security.util.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:390)
  at org.springframework.security.context.HttpSessionContextIntegrationFilter.doFilterHttp(HttpSessionContextIntegrationFilter.java:192)
  at org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
  to org.springframework.security.util.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:390)
  at org.springframework.security.util.FilterChainProxy.doFilter(FilterChainProxy.java:175)
  at org.springframework.security.util.FilterToBeanProxy.doFilter(FilterToBeanProxy.java:99)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:70)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:527)
  at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
  
  Thank you

  Hello

  If you are not using NodeManager then in this case, set memory inside the "setDomainEnv.sh' arguments in the variable JAVA_OPTIONS.

  If you start your servers managed using NodeManager (i.e. Console), then try the following options

  Path of the administration Console:

  Servers --->   ---> Configuration [TAB] ---> ServerStart [SubTab] 
  

  In the Arguments box for the below lines
  -Xms1024m-Xmx1024m - XX: MaxPermSize = 256 m

  Also refer to the following:

  Topic: Nodemanager based ManagedServers setting MEM_ARGS
  http://middlewaremagic.com/WebLogic/?p=780

  Kind regards
  Véronique Mody

• Can not see the images of the patent (i.e., D/359 691) on research of patent USPTO.gov, it tells me I need a plugin (7.7.1.0 Quicktime) that I've already updated.

  Can not see the images of the patent (that is, D/359 691) on USPTO.gov patent search, it tells me I need a plugin (Quicktime) that I've already updated.
  In the 'quick search' I give terms & it compiles a list. I have then cross to every doc and look to see the doc and associated drawings. I don't know what to say at this stage.

  Thank you.

  QuickTime cannot handle images in TIFF format.

  You can watch AlternaTIFF - http://www.alternatiff.com/

• tried to start an application, "requires at least version 8 of Flash. Please update your client. Yes, I did. restarted FireFox, but I got the same msg.

  I tried to start an application, got "requires at least version 8 of Flash. Please update your client. I've done (..) Adobe Flash Player 11.0.1.152). restarted FireFox, but I got the same msg. Then I restarted Windows 7... no change.

  There are 2 versions of Adobe Flash:

  • an ActiveX version for IE only
  • a plug-in version for most of the other browsers including Firefox
  • On a Windows system, you must always update both individually.

  You don't seem to have the Plugin for Firefox installed version. If you did, in the Add-ons > Plugins you would see "Shockwave Flash (version)".

  Install or update Adobe Flash

  1. With Firefox, click the direct download link below and SAVE the download on your desktop, so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
  2. When the download is complete, close Firefox (file > button OR exit Firefox > exit)
  3. Click or double-click the file that you just saved on your desktop
     • In the install window that appears, select the check box to the left of "I read and...» "to place a check mark in the box of
     • The button 'Install' in the lower right corner is now highlighted, click it.
     • Installation is quick.
  4. Launch Firefox and test your installation here: https://www.adobe.com/software/flash/about/
  5. ActiveX for IE onlydirect link version: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Automatic Update keeps wanting to install the same 5 updates every day even after what they are already installed.

  The automatic update keeps eager to download and install the same 5 updates daily. These 5 updates are KB979909, KB982168 KB982524, KB983583, KB2418241. I looked at the log of update and it showes them already installed. This has happened since November. What can I do?

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/32ba77cb-cff2-4155-b70d-e31b7ba4c8df >

• BlackBerry Smartphones New - fatal error during the first update by using the Office Manager phone

  During my first update using the Desktop Manager, there were 13 steps, and I had to unplug to half way through.

  Now when I try to repeat the process, the update gets steps 1-6 and just after reconnecting to JVM (step 6) I get a "fatal error update device software, please try again" I tried several times and it always stops in the same place.  The phone then has the radio turned off, and I have to restore the connections.

  I'm not an irritable person, so any help would be appreciated.

  Thank you!!!

  Never disconnect during an update. Never.

  This is therefore a new phone, follow the instructions below.

  First, remove the battery from the BlackBerry when lit, to subject a minuite, replace and see if it restarts. If this is not the case, continue below.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.