Get means during the updating of our application

Similar Questions

• My iPod Touch 5 G gets hot during the use of any application.

  Hello. Get - my iPod very sweet-hot everytime I use ANYTHING. Even if it is the only application running. He sometimes unpleasantly warm to keep it. I left for a while to cool off, but heat just backup again. (Note: the top of the iPod heats up for the most. This is where the battery.) I've owned my iPod for less than a year, but I buy used off of eBay. (he was "released to nine seller") y at - it means to solve my problem, or is my battery just worn out? I don't have a warranty and do not have the money to fix it. Thanks in advance!

  Make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem. Appointment/diagnostics are free

  https://www.Apple.com/retail/Geniusbar/

• Windows 7 hangs during the update of any application

  This just started to happen with the last update CC. I have a dozen of programs that require an update.  No mater what we I click, Windows crashes after a few minutes. Locking of the solid. Need to reboot. Nothing in the error logs. It happens every time. Tried to remove and install the CC Office, no help.

  Any suggestions?

  Thank you

  Rick

  Salvation;

  Tried that. Finally, I tried to start in safe mode. Then install it worked.

• If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  Hello

  The next operating system update, watch OS 3, will be available for all Apple Watch models, including the first generation watches.

  We should go out on 13 September, after which it can be installed by following the steps detailed here:

  • Update the software on your Apple Watch - Apple Support

  More information:

  http://www.Apple.com/Watchos/

• Get-9860 torch blackBerry Smartphones stuck during the update

  Hello

  I bought a new unit of bb now I'm updating everything and he's stuck during the update wat to do?

  Following currently being held in the screen for half an hour now

  

  Now it finally works

  glad to see that it works for you

• iPad froze during the update and may not exceed

  Has obtained the new ipad and put in place.  Went do the last software update and it froze during the update process.  Blocked at the white screen with the apple logo.  Can not pass it and past 2 hours.  Tried to restore through itunes, but get the error that I need to enter my password which I can't because I'm stuck on the white screen.

  Hey there smbirchler,

  Congratulations on your new iPad! Looks like you were updating the iOS version, the device froze, and now you can't pass the white Apple logo screen, even after you try to restore in iTunes. I know how happy I am when I get a new camera, so we'll work together on that, so you are able to enjoy your iPad mini.

  We will have you try to use the device in Recovery Mode. Take a look at this article for how to do this:

  If you are unable to update or restore your iPhone, iPad or iPod touch

  Thanks for being a part of the communities of Apple Support!

• Re: Restoration of windows after abrupt during the update

  Hello world

  Last night I was updating my windows on my Toshiba laptop, however, my laptop suddenly shut down during the update process.
  Now, when I start my laptop, I am invited as a system error and I have to put my windows CD to continue. I've never had a CD of windows, and nor have I made a disc of recovery yet, so is it possible possible for me to connect to windows again? I use windows Vista.

  Any suggestions would be grateful.

  Thanks in advance

  You can enter advanced with F8 at startup startup options?
  You can get Vista in safe mode?
  Repair my computer option is available there?

  Try to use this option and you will enter the system recovery options. One of the options it is start repair or system restore.
  Try to fix the system or roll back the OS to an earlier time using System Restore.

• Equium A60 crashed during the update of the Bios

  Hello, can someone tell me if this can be repaired. IHAVE an A60 Equium that crashed during the update of the BIOS, now he died nothing lights up.
  Thanks in advance

  I presume that the BIOS chip is damaged. In this case, you can do anything to make it work again. Just approved can help.

  The problem is that the repair can be quite expensive. Check it out. If selling Yes the laptop on eBay and... you know what I mean. :(

• iMac14, 4 have message "Could not install Windows 10" during the update to build 11099.

  iMac14, 4 have message "Could not install Windows 10" during the update to build 11099 and get the error message "this device is not compatible on Windows 10. Contact the manufacturer for more information. (Network Broadcom 802.11ac adapter) ».

  Picture to describe the problem: http://i.imgur.com/H0SlKd6.jpg

  I think you need to contact Microsoft.

• Why am I getting errors on the updates of windows I have vista and receive updates for xp with 0000057e erros

  Windows Update error

  Hello Sir Edward Parker,

  Thank you for using answers.microsoft.com

  Follow these steps to solve the problem.

  -->> Go to Windows Update and search for an update marked "Failed".
  -->> Click on "View Update History".
  -->> When you see the update history, click the link as if you were going to download the update.
  -->> Do not download, but instead, click 'Run' and run the update.
  -->> During the update, you will get errors - JUST click ON 'Ignore' and go through the errors.
  -->> The update complete, although history will show always 'Impossible' for once.
  -->> Next time Windows Update is run, she sees that the update takes place and mark the update given as a 'success'

  That should solve the problem for you.
  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• accidentally turned off during the update of windows

  Guys, im using sony vaio with vista premium OS and it is automatically updated, I had used to remove my battery for use at home, during the update of windows, I accidentally kick off the power cord and it disconnected from the main power switch and turned off, when I open it I saw a note on the bottom right 'tm this copy of windows vista is not authentic.

  someone could help me on this guys, how can I do recover without reformatting my laptop.

  Please help me guys...

  Thanks in advance...

  Needless to say, cutting the current during the update process can cause all sorts of problems - many not even related to the update itself.  It is a common branching.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  I don't know if this will solve the problem, but it might.  It's worth a try (and it can be useful if there are other problems that you have not yet detected).  Whether or not it works, you will need to re - install the update (and this time won't turn off - LOL).

  If you still have the problem of validation after system restore, and then click Start / computer / system properties and check the bottom of the Activation section.  Your system always shows that it is enabled?  If this isn't the case, then reactivate.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  If this does not resolve the "not genuine" message, please post your problem in the Windows Genuine Advantage Forum: http://social.microsoft.com/Forums/en-US/genuinevista/threads , where the experts on this kind of problem will be more than happy to help you with your problem.  They will probably ask you to run a program and download the results so they can examine in order to find the problem - just follow their instructions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Way around being hung to one outlet during the update of Windows Vista Service Pack 2?

  I have a problem, I have a laptop Toshiba where AC internal adapter is broken, it has been for some time - but my buddy has also a Toshiba laptop computer, where I can just return for batteries between the two and this system has worked fine just now, the problem - I could do my Windows updates business as usual until Service Pack 2 for Vista, it will not allow the installation of the update because my laptop is on battery.  Is there a way to get around this?  I have of course no way to connect to food unless it is repaired, and at this point I just prefer to get a new laptop that money put into this one - I'm hoping somewhere someone has suggestions! :(  Help!  Thank you!

  Hello Victoria MariaElena.

  Unfortunately, there is not another way. Your laptop must be powered by the sector during the update to avoid the laptop shut down due to lack of battery power.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Vista froze during the update. Can I stop?

  Hi all.

  I tried to update my friend with Vista Service Pack 1 computer, but it froze during the update.  I tried to cancel the download task manager and restarting, but it is now fixed on the 'day of the installation.  Do not unplug or turn off your computer"screen.  It made no progress.  Can you force shut down the computer?

  Thank you
  Angela

  Hello

  give him a little more time

  If it continues like that and you must stop and restart problems, try the following steps to solve this:

  1st thing to try would be a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

• ENVY 100 printer D410 - screen says "Do not, power down during the update" permanently.

  I'm a Mac user Mavericks 10.9.1 running on a Mac Book Pro.

  I have a HP ENVY 100 D410 printer that works your for a few years.

  Recently, the LCD screen of the display on the printer offered, "there is a new driver. You want to update? "(Yes/no)

  (Or something close to that.)

  Unfortunately, I chose 'yes '.

  The printer then tried to update, but eventaully the LCD screen on the printer displays a flashing message:

  "Do not feed, down during the update"

  The printer now flashes just this screen continuously. The LCD screen will not display anything other than this message.

  The printer works when connected by cable and wireless. (Airprint works very well).

  I can scan documents, I can print pages, I can even access printers "Web page.

  But the LCD touch screen control panel is 'stuck' in flashing update message.

  I can't find any way to clear this error and allow the printer to complete the update.

  Help. Please, I beg you.

  Hello

  There is a fix to resolve the specific problem, but I'm afraid it is only available for earlier operating systems under OS X 10.5 and 10.6, Windows XP, Vista or 7.

  I you suggest to get a computer with any operating system supported, install the latest version of the software on the HP site using a USB and then follow the steps.

  The latest version of the software can be found below (the basic software should be sufficient):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4062&product=4073738&softwareitem=MP-92513-1&sw_lang=&

  Make sure that you carefully go through the procedure to the installation section in the patch download page.

  Hope that helps,

  Shlomi

• using office creative cloud up-to-date PSCC and CRD.  PSCC updated very well, but it froze during the update of the CRD. What to do now? Chat is closed.

  Creative desktop cloud application froze during the update.  Updated fine PSCC but LRCC froze before it has been updated.  What should I do now? Chat is closed.  ON the home screen of the creative cloud desktop application it usually shows my activity - but now it says nothing except "your hoome stream is empty.  Should I download new creative cloud app - it's corrupted?

  Hi Carol,.

  Please follow the steps below:

  (1) uninstall Adobe CC (use of the Adobe Creative Cloud cleaning tool to solve installation problems)

  (2) restart machine

  (3) install the application Adobe CC since the help document: use of the desktop application cloud creative to manage your applications and services

  Kind regards

  Sheena