In Photoshop, I try to print, the message: the disk is not available

Similar Questions

• cannot apply the workspace of lighting effects because the disk is not available. I use Photoshop cc 2015 on OS 10.11.3

  I use Photoshop cc 2015. When I go to render the lightig effects, I get a message saying 'cannot apply lighting effects workspace because the disk is not available. I'm running on OS 10.11.3 system

  Any ideas?

  Hi Mary,

  Please take a look at the following link: Optimize performance Adobe Photoshop CC and try the steps.

  Once done, see if you still get the same error.

  Concerning

  Tanuj

• "Could not initialize Photoshop because the disk is not available."?

  I've been happily turn Photoshop CS (1) on my Powermac MDD for years.

  But today, she is facing upward.  Here's the problem: I get the error message "could not initialize Photoshop because the disk is not available."

  I have studied this problem and see that it's been covered in the thread:
  http://forums.Adobe.com/thread/370672?start=0 & tstart = 0

  So I trashed preferences and the SFW prefs also.
  Now Photoshop starts... BUT as soon as I go into the preferences and assign a scratch disk, he failed once more to throw with the same error: "could not initialize Photoshop because the disk is not available."

  I tried to slide on the copies of the utility Photoshop of my backup disk files... but the same strange behavior persists.

  My Scratch disk is on a second internal hard drive.

  This all started when I had to restart from OS 9 order to use my SCSI scanner, which only has an OS9 driver.
  I used it for years with no problem... until today.

  Was it because once I saved the file in Photoshop 4 and OS9 on an OSX file that somehow the preferences got screwed up?

  Popular clues...

  Jn

  work drive must be HFS +.

  also check the permissions of the property in the Infolog to get for the reader scratching. You may need to ignore permissions for this volume.

• 'Cannot open file because the disk is not available' Mac

  I recently changed the selection of Photoshop (CS6) Scratch disk to the boot drive by default to one of the other internal drives in my MacPro (OS 10.6.8).

  When I restart Photoshop (CS6) I get the message:

  "Cannot open file because the disk is not available"

  and Photoshop will not start.

  I then restart Photoshop with 'Control - alt - shift' keys

  (suggestion to <http://forums.adobe.com/message/3937003>)

  and reset preferences that allows Photoshop to return.

  (Reset preferences returned the boot drive to drive work status.)

  I have an another MacPro, the - same 10.6.8 OS and Adobe CS6 - and I don't have this problem of allocation of work disk.

  What happens with a MacPro which prevents me from selecting one drive other than the boot drive working Photoshop

  Probably a permission problem.  Run the Apple disk utility to repair permissions.  If this does not work the glance to the non bootable drive and check "Ignore permissions..."  Open the window Info Finder and it came inside.

• Elements 9 does not open "because the disk is not available.

  Hi all

  I have PSE 9 on my Mac for 18 months without any problem.

  Recently, I upgraded the boot to a larger drive that the original was running out of space. I used a standard drive, cloning tool, and all was well.

  Except... PSE now says he "cannot open file because the disk is not available" follow-up by "cannot initialize because the disk is not available.

  I uninstalled PSE and downloaded a new copy, perhaps thinking that the original has been somewhat altered by cloning. Always does the same thing.

  I have repaired permissions and restarted but still does the same thing.

  Frankly I'm perplexed.

  Anyone got any ideas? It does not even tell which disc he thinks is not available!

  Then, the conflict is with something in your user account and find what could be a lengthy process. Try to restart once more the Editor while pressing command-shift-option, keeping the keys down until you see a window asking if you want to delete the settings file. You do. This almost always solves this problem; I don't know why it is not to help you. Using 10.7?

• Acrobat and Reader 8.  When you try to print, the memory could not be "read".

  A user (without local administrator rights) does a job batch of Microstation and exported all his drawings in pdf format.  They open correctly in Acrobat 8 and Reader 8.  When he clicks on the button print, it gets the error below.  When I login with local administrator rights, I can print these accurate pdfs very well.  Here is the event/error log entry.   Any help would be greatly appreciated.   It runs Windows XP SP3.

  Event type: Information

  Event source: Application Popup

  Event category: no

  Event ID: 26

  Date: 27/03/2012

  Time: 17:27:46

  User: n/a

  Computer:

  Description:

  Application popup: 2012-03-27 C6-01. PDF - Adobe Acrobat Professional: Acrobat.exe - Application error: the instruction at "0x0436959a" referenced memory at "0x00000d28". The memory could not be "read".

  Click OK to terminate the program

  Click on CANCEL to debug the program

  We tested with another nonadministrator account and Acrobat worked fine.  Therefore, the problem was in the user's profile.  We just its data saved, deleted the old profile and did reconnect.  This has created new profile.  Acrobat works beautifully.

• After you download PS CC 2015 eroor message...  Could not apply the workspace because the disk is not available.  Help!

  I am a Mac user and have the account Cloud creative photography.

  Yesterday, I downloaded the latest version of PS CC 2015.  Since when I try to create a new file in PS I get the above error message.

  I uninstalled and re-installed PS CC 2015 three times.

  I have reset Pram and MSC computer.  In addition, I held the course, option and i think during the opening of the PS and then get new settings.

  Nothing seems to have worked.

  A suggestion that I am heistant to try without some indications it's OK is to uninstall both the PS CC 2015, as well as the creative Clouud and then reinstall the creative cloud followed a new time download PS CC 2015 again.

  Try to give permissions to both libraries (library system & user library) and the Applications folder.

  For the Applications folder

  ---------------------------------

  Open Finder

  On the left panel, you will find applications-> folder, right-click on this (CTRL + click) and then click on read the information.

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with file applications here.

  For the user's library

  -----------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "~ / Library ' and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Made with the user here library folder.

  For the library system

  ----------------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "/ Library" and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with the record of the library system here.

  Please let me know if it works

  Please note: do not just right-click on MAC HD complete and provide all permissions that can bring the MAC in any startup mode.

  Concerning

  Jitendra Khatwani

• Why can't I open my PSD files? There is a pop-up message stating "could not complete your request because the disk is not available." what does that mean?

  I recently deleted things from my computer and I don't think the thing for photoshop mattered who was mute. I don't know what it was either.

  You must open a document first and then go in Edition > purge > all

• CANNOT OPEN A FILE BECAUSE THE DISK IS NOT AVAILABLE

  Any thoughts?  I can't open the program.

  I have a mac pro with four discs who thought that I just finished a successful legit academic version, installation previously used by myself only.  Production Premium CS5.

  Matt

  

  There is no image "attached".  You cannot display a picture if you have access to the forum by e-mail.  Everything will disappear from any file attached to an e-mail in cyberspace, without anyone ever seeing.

  To embed an image in a post, use the camera icon in the editor of response in the forum web interface using your web browser.

  Back to your question:

  You need to trash your preferences Photoshop by pressing Command + Option + shift as you start Photoshop until you get a dialog box allowing you to remove your preferences settings.

• Photoshop does not start. Scratch the disc is not available

  Help, please. I assigned a certain player on my Mac pro to be a scratch for CS4 disc, as I did when I had a PC. Now, when I try and start CS4 it stops and says "cannot open a file because the disk is not available" I press OK and then get "could not initialize photoshop because the disk is not available. I uninstalled PS4 and reinstalled but it always does. The disc scratching that I assigned is a partition on the primary drive. I have no idea what to do next.

  Reset your preferences by the FAQ on the PS Mac home page.

• Printer Offline Message When you try to print the Office Word doc

  Message from the printer offline.  HP shows printer status is online with wireless network and computer ASUS says is in line with wireless network and internet but when I try to print a word doc it does not print.  I get a message that the printer is offline.

  Hi Robin,

  Are you facing this printer offline error when you try to print from Microsoft Word?

  Error "the printer is offline" message on the computer and the printer does not print. Offline indicates that the computer has lost a direct communication with the printer.

  I suggest you try the steps from the following link and see if that helps.

  "The printer is offline" Message appears on the computer and the printer will not print: Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c04249080

  I hope this helps. Let us know if you have other problems with Windows in the future.

• When I try to print a PDF file it does not print and goes directly to a backup of the file option.

  When I try to print a PDF file it does not print and goes directly to a backup of the file option

  original title: pdf print
  Hello

  1. don't you make changes on the computer before the show?
  2. don't get any error message?
  3. what version of the operating system is installed on the computer?
  4 is the issue limited exclusively with printing PDF files?
  5. where are you printing from PDF files?
  6. What is the brand and model of the printer?

  
  Method 1:
  Run the fix it and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  
  Method 2:
  Perform the steps from the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 3:
  You can perform the steps from the link and check if you are able to print.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Reference link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Once I try to print, followig message "LINE 1171 CHAR 1 ERROR: UNSPECIFIED ERROR CODE: 0 url:res://c:windows\system32\shdoclc.preview.dlg.

  Once I try to print, followig message LINE 1171 CHAR 1 ERROR: UNSPECIFIED ERROR CODE: 0-url:res://c:windows\system32\shdoclc.preview

  Hi NoelHughes,

  ·         The issue is limited to a specific application?

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check if the problem still persists.

   

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  You can also view the article mentioned for more information below:

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know the results.

• When you try to print the document his service hence giving error does not

  I am using windows xp pro sp2

  When you try to print the document his service hence giving error does not

  then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

  Please help me

  Hi kalpesh_vaghela,

  1. Did you the latest changes on the computer?
  2. What is the full error message that you receive?
  3. What is the number and model of the printer?
  4. You use any program to print the document?
  5. Are you experiencing a similar problem with any program that allows you to print?
  6. You have security software installed on the computer?

  Method 1

  See the link below and try the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  When you are prompted, click restart to restart the computer.

• When I try to print, I get a print error message and it does not print.

  Original title: wireless printing problem

  I can't print to my wireless network.  The printer is ready, but when I try to print I get a print error message and it does not print.  The printer is an Epson Artisan 710, and my computer is an ASUS K52F.

  Hello

  Have you tried printing so that plugged directly to the printer instead of use wireless. Just want to make sure that the printer is working correctly.

  In addition, what exactly the error message say?