In Photoshop's Clone Stamp tool applies the theory of matrices in its functions?

Similar Questions

• Could not use the Clone Stamp tool as the area to clone has not been set

  Freshly installed 10 items.  Can not use the option-click to define an area for the clone stamp.  The error I get is:

  Could not use the clone stamp tool because the area to clone has not been defined (option - click to set a sampling point).

  New Mac Mini.  Had the same problems in Elements 9 so I installed the trial of 10.  Is it an error of keyboard shortcut?  Do not have this problem with Elements 9 on my Mac Air or my Windows 7 system.

  I'm not a newbie and know how to use the tool clone.  I won't say that I'm an expert, so if it's something related to diapers please throw some ideas.

  Yes, that sounds like a problem of layers.  If the area that you use to define the source of duplication is a transparent area on one of your layers, it will not work.  Released from the Palette layers, then make sure that you use the area of the image (and not the mask area) - if the area of the image on the layer is active, it will have a border.

  Ken

• Option-click on the Photoshop CS5 Clone Stamp tool just stopped working why?

  I am using clone stamp tool option and click on Photoshop CS5 on my Mac 10.6.5 and it stopped working suddenly on Monday.  He had just used Sunday.  So, I tried to isolate the problem.

  1. at the Apple store and my work as a keyboard and mouse is well spent on their internal systems running Photosochop CS5.  Problem still exists on the system at home.

  2 adobe photoshop suggested I go back to Mac 10.6.3.  I did and the problem still exists.

  3 reset all settings predefined in CS5.  Problem still exists.

  4. has spent several hours with Adobe Photoshop tech on phone - he could not operate it remotely either.  RELOADED Photoshop from scratch.  Problem still exists.

  Question:

  This could be a hardware problem?  Graphics card problem?

  Or is it a software outside of CS5 and Mac OS problem?

  Thank you - HelpMeJoan

  Hello Joan.

  This forum is to feature on Photoshop.com site requests. Using issues such as you are experiencing, please post your request here:

  http://forums.Adobe.com/community/Photoshop/photoshop_macintosh

  -Brett

• When you use the Clone Stamp tool CS6 the alt key does not work?

  Just recently, my mouse have misbehaved and touched my CS6 when I was working on a photo. The result, my alt key does not work. For example, when I use the Clone Stamp tool, I can't sample as the alt key does not work. Even in ACR, the alt key does not work. When I drag the 'white' to the left while pressing the ALT key, the screen turns black.

  Help, please? Thank you

  Steven Teo

  Hi Steven Teo,

  You are able to use the ALT key well otherwise on your computer?

  You can try to reset the Clone Stamp tool.

  To reset, follow the instructions below:

  1. Select the Clone Stamp tool

  2. right click / Control click dropdown at the top left

  3. choose Reset tool

  

  Hope that helps.

  Kind regards

  Assani

• Photoshop CS4-clone stamp tool

  Hello

  I want to erase the watermark and purposes an istock comping image x brand. What is the most simple/fast way to do it? Clone stamp/patch tool? If the stamp tool, how to get the tool to remove the line x in a straight line. Mine always copys pixels next to him.

  Thanks in advance.

  I want to erase the watermark and purposes an istock comping image x brand. What is the most simple/fast way to do it?

  UM, you buy the stock photo / work? Seriously - if it's just for a model / model design, that neither you nor your customers will / should mind the watermarks and in accordance with the regulations of most of these sites, it must be left in place and a mention of the original in the copyright source. Everything else is just an attempt badly designed to circumvent their rules and regulations...

  Mylenium

• I have a problem with the Clone Stamp tool?

  The Clone Stamp tool doesn't work really well it does not tell the source select and the pad want not applied the correction?

  You have two active subscriptions.

  1, adobe Stock.

  2. the plan of creative of cloud photography

  Please let us know the question you face with which order a screenshot will be more useful.

  Concerning

  Stéphane

• The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  What version of photoshop are you?

  The red eye tool should be in the same location as the healing brush and Patch tools.

  

• Clone Stamp tool works is not on the new layer

  I created a new layer and tried the on this new layer Clone Stamp tool to us, but it won't work. It will work on the background layer, but not the new layer, that I created. Please help, it drives me crazy. I use the last photoshop.

  Looks like you beat me, Chuck!

  Mine works fine on current and below.

  

  Try a reset of the tool:

  

  If this fails, try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Hold down Cmd + Opt + shift and run Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

  Benjamin

• Hi, I'm working on CC photoshop classroom in a book, and I find I can't use Clone Stamp tool, why?

  Hi, I'm working on CC photoshop classroom in a book, and I find I can't use Clone Stamp tool, why?

  For example, if you want to clone the boy on your photo, you would have 1) Option + click on part of the stone wall first and then 2) use your tool clone directly on the boy.

  

• Automated control of the option line in the Clone Stamp tool. Intentional? Or my installation?

  Hello

  Today, I noticed an "Aligned" somewhat unusual in the Clone Stamp tool when behavior is deselected. By double-clicking on the image with the button alt or option key causes of the behavior of the tool of change and 'Aligned' to become verified. So if you do not intend using aligned, you alt/option click of your mouse to point the source, decide on a different source point, click alt/option and all of a sudden you find yourself using an aligned clone stamp.

  This does not happen with the Healing Brush tool, which makes me think this isn't an intentional shortcut. It is also powerful irritant.

  I tried it with x 64 and x 32 CS6 on Windows. It happens on both. It also happens on the Macintosh? Is it possible to turn off this behavior?

  Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08 / 08:21:00:00) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  Best wishes

  Dave

  Discussion title has been edited by: Dave S.-C.

  OK, according to Jeffrey Tranberry, there is currently no way to change this behaviour given - reset tool (something that I constantly forget!) reduces the time that the second click took to be recognized, allowing better control of the tool for me. Hope this helps someone in the future.

  If changes should be made to this I would double click switch to be turned off completely.

  Post edited by: Dave S-C (corrected name of JT)

• Photoshop cs3 Clone Stamp - clipping option tool?

  In CS4, there is an option to "clip", the Clone Stamp so that it shows an overlay of your cloned area "cut to" the size of the brush. (If you uncheck the "cut" option he superimposed the entire image and does not limit the overlay of your brush area)

  This feature is available in cs3? On a friends computer, we found the option 'See the overlay' that shows all of the overlay image, but there is no obviouse to the clipped option.

  If it does not exist, where is it?

  Thank you

  CS3 has the clone source overlay, as you have found it, but doesn't have the Cup

  option, which was new in cs4.

  For most people who start using the clone source overlay, it is really confusing

  If your used to previous versions of photoshop, so that was probably a complaint in

  CS3 and adobe added the option cut to make it easier to use. You can try to check

  auto hide box, so that when you actually use the Clone Stamp tool, you will not see the

  overlay.

  MTSTUNER

• Problem with the brush of the Clone Stamp tool.

  I have not had this problem before.

  The brush takes the form of the Clone Stamp tool, that it is in the Toolbox, instead of a circle, as it was before.

  I have not found a solution to help : Brushes Sets the brush. Click the arrow next to the brush sample, choose a brush category from the pop-up menu of the brushes, and then select a brush thumbnail.

  In the photoshop elements Editor, go to Preferences > display & cursors

  and adjust the slider of the paint on normal or full-screen.

  

  MTSTUNER

• White layer no longer allows the use of Spot Healing brush and Clone Stamp Tools

  I do a lot of photo restoration. Before the last update, I used to add a blank layer and adjust the photo with the Spot Healing brush or Clone Stamp Tools.

  This no longer works.

  Solved

• Help with using the Clone Stamp tool.  How do a get a better game?

  Hello

  Please see my sample image:

  

  As shown in the picture, I want to remove the wood in the corner.  I thought using the Clone Stamp tool would give me the look of the corner by sampling above the wood and then clone on the wood.  But what I got is a lighter angle of research, not what I want.  I tried some blending mode, but I don't get the game I want, so I thought I would ask here.  Is there a better way to do it?  I have this same problem with other image like this.  I take a point of sampling part of the image and then the Clone Stamp ends by lighter or a different shade in the buffer zone.  Yet once, maybe the clone stamp tool is not the right tool to do this, if so, what else is there?  The Healing Brush tool is worse for what I do in the type of healing.

  Thank you

  The Clone tool may not be the best choice when large areas are involved. It is easier and faster to make a selection of an area of choice and then using Edit > transform > deformation to replicate and extend the area selected, as shown here

  

• The PSE 8.0 Clone Stamp tool

  Hi, my Clone Stamp tool has more 'normal' in the menu drop-down selection option. Can anyone help?

  End of the options on the left-hand toolbar, click the tiny triangle > Reset tool.