White layer no longer allows the use of Spot Healing brush and Clone Stamp Tools

I do a lot of photo restoration. Before the last update, I used to add a blank layer and adjust the photo with the Spot Healing brush or Clone Stamp Tools.

This no longer works.

Solved

Tags: Photoshop

Similar Questions

  • Pavilion 563w running XP CD/RW no longer allows the use as re-writable disc

    My CD/RW used to allow me to format a CD Virgin and read and write the files to and from it like a diskette using DLA.

    After a disk failure hard and reinstallation of XP DLA no longer works. The files are still there but the property is no longer present

    "Use with DLA" checkbox which appeared. I've tried everything I can think of to... Help.

    Have you tried to read this document of support and installation of DLA 4.6?

    http://support.HP.com/us-en/document/bph07940

    If you right-click on the icon for the drive in my computer, there should be a DLA tab if it is properly installed (not just a checkbox). If this is not the case, the ALD is not necessary. You should be able to read and write to CDRW using Windows XP with off DLA. Click the recording tab, and then select Enable CD writing on this drive.

  • App for Apple Watch series 2 allow the use of heart rate, gps, and manual splits?

    I run about 60 miles per week and I plan to change my Garmin Forerunner 620 for a series 2. However, it would be totally useless to me if the watch does not intermediaries, as many of my workouts are pretty accurate. So, is it possible for me to intermediaries on the watch, and when looking at the splits also see the GPS info and heart rate for the said stock split?

    Hello

    To mark a segment (for example one lap) during running exercise using integrated workout app, you can double-click the screen. The display briefly shows the stats for this segment. Segments can be examined after training through the activity on the matched iPhone application:

    You can see that an application of third party best suited to your needs.

    To learn about the characteristics of third-party applications, I suggest you consult the descriptions of app developers and their support resources. For example:

    If you don't find the specific information you're looking for, you can ask the developer directly. This is usually possible through their support resources (you may need to create a free account in order to be able to connect). They may also be open to feature requests.

  • When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

    Question
    When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

    See:

    • Firefox > Preferences > advanced > general: system default: 'send performance data '.

  • BIOS update allows the use of modules of 2 GB RAM DDR on Satellite P10 554?

    Hello

    I have a satellite p10 554 and want upgrad my RAM.
    By default, the maximum that you can install's two Kits of GB 1.
    Are there any - update Bios, that allows 2 GB kits?
    Thank you very much!

    Ron

    Hello Ron

    The same situation with my P20! Unfortunately there is no BIOS update allows the use of the RAM more.

  • Impossible to change the Windows Media Center guide to allow the use of ot TV relay stations (translators)

    Live TV with Windows Media Center, where RF channels are different from that of the guide because of the distance TV translators (relay Stations)

    Cannot change the guide to allow the use ot (translators) television relay stations where the RF TV channel is different from the current station. For example, Station POLO6N is 9 RF channel in Eugene, OR, but here on the coast, it is the 35 RF channel. Zip code for our region apparently points to the station itself RF channel and the number of 1092 is shown and dimmed so that it cannot be changed. How the inputs of channel can be modified to adapt to this situation? Here on the coast, we're out of range (mountains, etc.) of the station itself.

    BH

    I have apparently discovered a way to watch and record live TV using Windows Media Center where the geographical area is served by the translators of the TV and the.

    If you configure the TV channels using only NOT the guide and using Add missing channels feature to add and configure the channels you use before you download the guide, you can set the actual RF frequencies of TV translators serving your area. In my case, I had to add the letters TD after the call signs of stations so that when I load the guide, he be to point to the current channel.

    After having added all channels and before loading guide, check the reception using the function designed to help you in the pointing of your antenna. Then load the guide and your channel configuration is retained and stored in a file pref.xml which apparently replaces the channels.xml file created by the loading guide.

    Unfortunately, detailed documentation on the product missing apparently (help files I found only State to follow the guests), or I didn't find it. In all cases, you can use Windows Media Center to watch and record live TV if you live in an area served by the translators/TV relay stations with different channels channels over-the-aor real real TV stations.

    If you find that you need to change a channel, use channel add rather than the function Edit channels, clear the X in the box and start over with this channel.

    BH

  • The Group Policy settings do not allow the use of a PIN code at startup Bitlocker Windows 8

    Hello

    I hope you can help.

    I tried to implement the encryption on my new laptop Lenovo Twist with windows 8, but get the following error.

    ERROR: An error has occurred (code 0 x 80310060):
    Group Policy settings do not allow the use of a PIN code start. Please choose a
    other BitLocker startup option.

    I tried to change local policy settings...

    1. Go to Local computer policy > Computer Configuration > administrative templates > Windows components > Bitlocker Drive Encryption > Operating System Drives
    2. Open the key require additional start authentication
    3. Activate this key, then assign the require startup PIN with TPM TPM configure startup PIN

    .. .but always not the same error.

    Help, please. He drives me crazy!

    Hello

    Thanks for choosing Microsoft Community to post your question!

    According to your description, it seems that you have problems with activation PIN code on startup.

    Refer to the suggestions from this link and check.

    http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/c3b5e90d-89fd-4e95-AF97-723b045eb41b

    For more help, I suggest you ask your question in the TechNet Forum. http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads

  • IAM trying to install Adobe In Design CS2 but only allowing the use of 30 days... Do you know how I can get this to run as needed?

    IAM trying to install Adobe In Design CS2 but only allowing the use of 30 days... Do you know how I can get this to run as needed?

    The activation servers have been closed several years ago. See Adobe - CS2 downloads

  • 6 fusion allows the use of the onboard graphics on the retina MBPro?

    Fusion 5 requires the use of the discrete graphics chip on the MBPro retina, which decreases battery life. 6 fusion allows the use of the onboard graphics instead?

    Yes, a third-party application such as gfxCardStatus is necessary to control that the GPU is used in conjunction with VMware Fusion, as it is by default go to discrete beginning / containing a virtual Macine.

  • ColdFusion 11 allows the use of MS Access 32-bit data sources?

    ColdFusion 11 allows the use of MS Access 32-bit data sources?

    Well well, my first rhetorical question: is 2014, why MS Access? MS SQL has free versions that are much faster and more stable than any version of MS Access, I have no problem of migration.

    Now to your question, 32 bit "should not be a factor." 64-bit applications can talk to most 32-bit applications through an API without too much difficulty. The only exception that I know are 32-bit applications that rely exclusively on the DLLs for their API - I don't "think" MS Access has this limitation. It was probably at least 15 years since I touched what whatsoever in dealing with MS Access so my hesitation to be clearer in my response. Good luck.

  • When you use the Clone Stamp tool CS6 the alt key does not work?

    Just recently, my mouse have misbehaved and touched my CS6 when I was working on a photo. The result, my alt key does not work. For example, when I use the Clone Stamp tool, I can't sample as the alt key does not work. Even in ACR, the alt key does not work. When I drag the 'white' to the left while pressing the ALT key, the screen turns black.

    Help, please? Thank you

    Steven Teo

    Hi Steven Teo,

    You are able to use the ALT key well otherwise on your computer?

    You can try to reset the Clone Stamp tool.

    To reset, follow the instructions below:

    1. Select the Clone Stamp tool

    2. right click / Control click dropdown at the top left

    3. choose Reset tool

    Hope that helps.

    Kind regards

    Assani

  • How to use the Spot Healing Brush?

    I used the Spot Healing Brush 5 images with ease. When I used it today, it would not help in the elimination of the task. What is the problem?

    The obvious things to check first: If you are in the right layer? If you are editing on a new empty layer, you select all layers checked. Following would be: you have a choice you hid. Another would be to ensure that the blending mode of the tool is to normal. If all those who are correct, then probably want to reset the tool.

  • Clone Stamp tool works is not on the new layer

    I created a new layer and tried the on this new layer Clone Stamp tool to us, but it won't work. It will work on the background layer, but not the new layer, that I created. Please help, it drives me crazy. I use the last photoshop.

    Looks like you beat me, Chuck!

    Mine works fine on current and below.

    Try a reset of the tool:

    If this fails, try a reset preference:

    Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

    Mac: Hold down Cmd + Opt + shift and run Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

    Benjamin

  • Could not use the Clone Stamp tool as the area to clone has not been set

    Freshly installed 10 items.  Can not use the option-click to define an area for the clone stamp.  The error I get is:

    Could not use the clone stamp tool because the area to clone has not been defined (option - click to set a sampling point).

    New Mac Mini.  Had the same problems in Elements 9 so I installed the trial of 10.  Is it an error of keyboard shortcut?  Do not have this problem with Elements 9 on my Mac Air or my Windows 7 system.

    I'm not a newbie and know how to use the tool clone.  I won't say that I'm an expert, so if it's something related to diapers please throw some ideas.

    Yes, that sounds like a problem of layers.  If the area that you use to define the source of duplication is a transparent area on one of your layers, it will not work.  Released from the Palette layers, then make sure that you use the area of the image (and not the mask area) - if the area of the image on the layer is active, it will have a border.

    Ken

  • CC of Photoshop seems to hang for a few minutes when you import Lightroom CC using the Spot Healing Brush.

    Recently updated Lightroom LR CC and CC updated Photoshop. When I "edit a photo in Photoshop CC", Photoshop seems to crash shortly after the image is loaded. Using the Spot Healing Brush just seems to hang the system for a few moments. Sometimes, I left the window and comes back only to see the large tracts of "to be edited" trails on the image. When they came, I have no idea. After an eternity, these trails are published. I have no idea where Photoshop is going and what is the cause.

    It doesn't look like we'll be much help then, but you use a similar thread in the LR forum?  No, I see that it is the only wire you have anywhere.

    This looks more like a LR problem, so go ask there as well:

    Photoshop Lightroom

    Lightroom does not launch or closes automatically after the splash screen

Maybe you are looking for