In some situations, you might need to reset the System Management Controller (SMC your computer)

Similar Questions

• Frequently, you will need to reset the router.

  I am running Windows 7 and have a Netgear N600 Wireless Dual Bank Gigabit router.  I am often "began" internet and have to reset the router.  I don't think it should happen, but have no idea what's going on or what to do about it.  Any help to solve the problem is most appreciated.

  It's your router or your ISP (Internet Service Provider).  Routers sometimes seem to "wear out" and must be replaced.  I had to replace a little once they got to have 3 or 4 years.  This has happened with Netgear and D-link and one I can't remember the brand.   I would check with the ISP well because you never know when they decided to do an interview without you say.  I've been running Windows 7 at home for 3 years and have learned that when I see trucks of the ISP in my area, I can often wait some disconnects.  I saw no problem with Internet I thought that Windows 7 related however.

  Good luck.

• Impossible of is trannsfer to music from the PC to the iphone and he said 'your computer is not permitted', "" you mustauthorize this computer before you download purchases. ""

  Original title: im trying to get my music from PC to iphone and he said 'your computer is not permitted', "' purchases on this computer before you download you mustauthorize." "

  Im trying to get my music from PC to iphone and he said "your computer is not permitted", "you must allow this computer before download purchases." HOW SHOULD I DO THIS!

  Hello

  Thanks for posting your question in the Microsoft Community!

  After going through the description of your problem, it seems that you have a problem with the transfer of music from your computer to the iPhone. I suggest you allow your computer and check the status of the issue.

  iTunes Store: authorisation and exercise.

  http://support.Apple.com/kb/HT1420

  If the question until persists, I suggest you to contact the support of the iPhone.

  Apple - Support - iPhone.

  http://www.Apple.com/support/iPhone/

  Hope this information is useful.

• Need to reset the date and time

  My system has decided that it is Jan.4th 2004 and everytime I turn it on, I need to reset the date and time. How can I cure this?

  Packard Bell's Web site does not recognize the 'ALT' CO2 as a model.  Despite this, however, PB seems only to provide a 'generic user guide"which is not described the replacement of the motherboard or the battery at all.  In fact, the only thing he has to say about batteries is be careful how get rid you of them.

  Your computer is a laptop or Desktop/Tower computer?

  If you have a desktop/Tower computer, you can look here--> http://www.uktsupport.co.uk/pb/mb/pbmb.htm and see if you can identify the motherboard used in your computer.

  However, if you have a desktop/Tower computer, the best thing to do is to unplug your computer from the network and, taking the precautions perfectly static electricity, open the box and inspect the motherboard yourself.

  A newish mother on the above site, http://www.uktsupport.co.uk/pb/mb/cosmos.htm, shows the battery on the center line vertical and more to the left.  It's just below the 3 PCI slots.  If you have something like that, a Visual inspection should be enough to see how to remove it.  The type of battery will be engraved on the top of the battery.  In the photo, it looks like a model CR-2032, but there are several models of battery on this size.  Battery CR-2032 (or equivalent) is available in almost every pharmacy chain in the United States as well as online and stores like Radio Shack.

  The page for an old motherboard, http://www.uktsupport.co.uk/pb/mb/450.htm, indicates that the battery is a '3.0V DC Lithium soldered to the motherboard"and if that were the case, it would probably be something that you wouldn't do yourself.  However, this thread is to think that all you have to do for this particular mobo is actually finding the right type of support plug-and - battery.

  If you have a laptop, things can get quite a bit more difficult.  If you can find a different model for your computer name, you may be able to find the manual here--> http://tim.id.au/laptops/packardbell/ , but some of these manuals can not explain clearly how to get to the CMOS battery.

• HP Pavilion dv6000 need to reset the BIOS password so I can ennable my wireless network

  I bought a HP Pavilion dv6000 laptop of a friend and you need to reset the BIOS password because she can't remember it... I can't open an internet oonto session due to my wireless adapter is disabled in the BIOS. Can you help me please... Thank you

  Keep trying no matter what password until you get a code of error/halt.

  Then, visit the site below & error/halt code allows to get a master password to work.

  https://DL.dropboxusercontent.com/u/26983620/Java_Bios/biosunlock.html

• I need to reset the password. Can't do Internet Igbo connecton

  I need to reset the password. Can't reset without the Internet. Cannot connect Internet cause without password to start macbook

  Reset password

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• 15 - an050nr: I need to reset the BIOS password.

  My model is 15-an050nr. I forgot my password. So I need to reset the BIOS password. Let me know the solution.

  Hello

  The password screen, press enter 3 times and you will receive a 'code to stop' - post returns with this code.

  Kind regards

  DP - K

• need to reset the password on HP 110 mini - CNU937DQ6G S/N

  Need to reset the password on HP 110 mini - S/N [removed privacy]-have not used in a while and I forgot the password. Locked out

  Welcome km. Try.

  e o f t g 5 h x 9 l

  Third letter lowercase l.

  Fourth lowercase O

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• New Internet Service, do I need to reset the router E2500?

  I had used temporarily my router E2500 to work with a wireless broadband source by connecting it to a Cradlepoint CTR500.

  Now I will connect the E2500 to run (and ongoing) with Time Warner Roadrunner using a modem cable Scientific Atlanta WebSTAR DCP 2100. Given that I'm changing the source of the internet, do I need to reset the E2500 to factury default values, and then perform a new installation using the Cisco Connect software?

  The cable modem is currenlty connected via an ethernet straight cable to the PC. I had read that remove the ethernet connection and the cable from the cable modem and the modem powered off for 10 minutes will cause the modem to "forget" the PC's MAC address.  Once connect it MAC address of the PC had been "forgotten", the ethernet cable from the modem to the router, which make the modem pick up the router's MAC address and eliminate the need to clone the MAC address of the PC. Does this sound correct?

  Unplug the power to the modem cable for 30 seconds should be good enough. In regards to the router, you should be able to get without a reset, if it is set to DHCP for the type of internet connection.

• Need to reset the password by e-mail

  Original title: need to reset the password

  Password and secret question do not work. Old cell phone number on the account, then send SMS the code didn't work. Could not find a way to request a code sent to a different email address. Working from home is on the account, HELP!

  You use hotmail/msn/live email from Microsoft?  If Yes, read this: https://windowslivehelp.com/solution.aspx?solutionid=6ea0c7b3-1473-4176-b03f-145b951dcb41

  If this is not the case, contact your email provider.

  Doc

  Computers verified since 1972

• Windows Anytime Upgrade, you may need to change the locale

  I'm trying to upgrade Windows 7 Home Premium to Windows 7 Professional.

  I type "Windows Anytime Upgrade" in the search field and go to the Express upgrade window.  I click "go online to choose the best product...". "and then it shows a window saying that I"might need to change the locale.  The computer is in the United States, whose English is the default location.  It will not progress beyond this screen.

  Windows Anytime Upgrade is no longer functional as it is a product of the retail, Microsoft sells more retail licenses.

  Your best option is to an Express Upgrade card for any inventory or Professional upgrade Windows 7 use the retail purchase with Anytime Upgrade from Windows 7 Home Premium product key.

  Where can I still get Windows 7?

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Microsoft Windows 7 Anytime Upgrade (Home Premium to Professional) [Code online]

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Need to reset the font and color of text background

  I need to reset the font and color of background. When I open a program it shows that it is set to now and I can't read anything. I tried to go to text reset original settings, and it doesn't fix it. What should I do?

  Right-click on the desktop and click Customize (if you can see) otherwise right click and press up arrow once and press to enter. Select one of the themes of your mouse prelisted. Once you select your theme all change and fonts and the background color of back to normal. But you must reselect your wallpaper and screen saver. It will be useful.

  Good luck!

  Vanshaj Daga [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Hello

  1. Have you made changes on the computer before this problem?
  2. You get the error message?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Open the troubleshooter in the Windows Media Player settings:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Install the latest version of codecs:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Need to reset the Data Warehouse

  Hello
  
  I need to reset the data warehouse so that I can start my first ETL process. However, I am not able to do DAC customer worm 7.9.5. When I click on 'Tools'-> 'management of ETL"->"Reset Data Warehouse"nothing pop up to do not know why, all other links and windows opens, with the exception of this. How can I solve this problem?
  
  Is it possible for me to do the reset manually?
  
  I checked on the internet and found AS below: -.
  
  D4 how do you run a full load (incremental)
  A: reset DataWarehouse. Just truncate the table S_ETL_REFRESH_DT in the repository of the dac
  
  So in our case, to truncate table will then be W_ETL_REFRESH_DT rite? Please confirm. We have planned to operate the ETL at 18:00 today.
  Y at - it all the other tables I need to truncate this way?
  
  Thank you
  Saran.

  Hello

  I worry if this window does not work correctly, you should probably work out why, I use 1.5.0_17 jdk in our environments (with apps 7.9.5) and that works fine, I suggest to try another version of the JDK and see if that fixes the problem.

  Kind regards

  Matt

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.