In the face of the question then Server installation SOA to put up BPM11g working environment

Similar Questions

• Address the content slide; back to the question; then continue on--using Captivate 8

  Using Captivate 8, I'm trying to fix a question slide to a slide content, then back to the issue of KC to check for retry and then continue from there.  On my trial, it works very well.  However, the problems began on the second instance and continue on each instance, subsequently. Settings on the issue of KC slides are all the same except that drag each jumps for sanitation.  I don't understand why it works the first time, but does not work after that. On the second instance, the issue returns to the content slide, but then passes any subsequent slide.   Someone at - he had a similar experience?  Know of a workaround or solution could I hurt?

  FYI, I have he delivers E-Learning discovered Adobe Captivate 8 Elkins, Pinder and Slade uses as a reference, and it describes clearly how to page 183, "sanitation back to content slides - if student gets a question wrong, you can branch to one or several slides, where the content has been taught and then return them to the quiz to try the question again.»  To add connections to sanitation: 1) in the last field of attempt on the issue, put a jump from slide to slide first with content.  (2) on the last slide with the content, add a return to the Quiz competition on the next slide button.  On slide content, the button next, with the return to competition of Quiz performs an action continues in normal circumstances, but returns for the quiz students if it is from whence they came. »

  Please see the map content below:

  Content
  Mapping:

  Slide 1-content

  Slide 2 - content

  Slide 3 - content

  Slide 4 - content

  Slide 5 - content

  Slide 6 - content

  Slide 7 - content

  Slide 8-content

  Slide 9 - Question to check knowledge - converts back to slide 5 If the user forgets two attempts to answer; slide 5 returns the user to slide 9 for one last try in question, then move on to slide 10 (works perfectly)

  Slide 11 - content (Here's the first problem; on click, slide 11 jumps to the Question to check knowledge on slide 13, jumping slide 12)

  Slide 12 - content

  Slide 13 - Question to check knowledge that converts the back to slide 11 if the user forgets about 2 attempts to answer. slide 11 should return user here for one last try in question, then switch to Slide 14

  Slide14 - content

  Slide 15 - content (Here's the second problem; on click, slide 15 jumps to the Question to check knowledge on slide 19, jumping sliding 16, 17 and 18)

  Slide 16 - content

  Slide 17 - content

  Slide 18 - content

  Erik, sanitation is integrated since version 6. The next button can have a double feature: coming from a normal slide acts as then, when they come from a question slide she come back on this question with the mentioned order slide.  It's been a while since I tested this out, but it worked. I don't know what's not in your project.

• The 7 multi-server installation

  We installed the version multi-server (CF 7.0.1) on 2 servers to a cluster.
  
  We have created an instance on both machines (with different names). When you try to save one of them as a remote instance, before defining a cluster, the message "Network error" appears in the admin interface. The log file does no further clue.

  With many thanks to Nick Watson from Adobe to finally find the solution:

  What you need to do is to put a bindAddress and unicastPeer in the /servers/ {JRUN_HOME} {NAME}/SERVER-INF/jrun.xml SERVER INSTANCE of file on two servers like that

  In the section

  Add this line

  THE IP ADDRESS OF THE REMOTE SERVER

  Then add in the proxyservice the bindAddress
  

  ADD the following
  IP ADDRESS OF THE SERVER

  Do this on both servers

  Then
  Edit the jndi.properties on each server
  {JRUN_HOME} {SERVER INSTANCE NAME}/SERVER-INF/jndi.properties /servers/
  Change this line
  Java.naming.Provider.URL=localhost\:port NUMBER

  TO

  Java.naming.Provider.URL = IP ADDRESS OF THE SERVER\:PORT NUMBER

  and add this:

  Java.rmi.Server.HostName = IP ADDRESS OF THE SERVER

  Restart both instances

  From there you should be able to record every remote instance on the server in the face and create the cluster

• the question then remember password cannot hide for long time

  Fix it
  

  not to hide the password do not forget the box for a long time
  
  PHOTO QUESTION

  Hello

  Please check if this happens in Safe Mode.

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

  Safe mode disables the installed Extensionsand themes (appearance) in (Alt + T) Tools > Add-ons. Hardware acceleration is also temporarily disabled - manual setting is Tools > Options > Advanced > general > use hardware acceleration when available. Options > Advanced. All these parameters/additional custom modules can also be individually or collectively disabled/enabled/changed to normal mode of Firefox to check if an extension, theme or hardware acceleration is causing issues.

  Options

• Problem with the microsoft SQL server installation 2016

  When I'm tryig to install MICROSOFT SQL SERVER MANAGEMENT STUDIO 2016 his watch an error like

  [8:21 TO 8 19(D)] [2015 12-14 T 13: 46:06] e000: MainViewModel.OnBundleAction: Bundle action failed

  What to do to solve this problem. ?

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• The Adobe Media Server Installer does not run

  I'm trying to install Adobe Media Server 5 on Windows 2008 R2 64 bit on i3 logged on as user administarive RDP.

  The installation program just does not--a very short hourglass and then nothing.  No newspapers in application Setup System connects.

  The Group installation Adobe Media Gateway program works very well.

  Tried a reboot of the machine and still no go...

  Any ideas gratefully received

  Simon

  OK, had... come on properties on the file and 'unlock'

  It was because I downloaded on another machine and then copied on.  Windows 2008 knew that he had not been made locally and quietly blocked the execution.

• What is the password for the key - short Server Installation store

  Hi Experts,
  
  I just installed server short depending on the Documentation Version 7.5.1.
  
  When I run the following command
  
  *./Endeca-cmd.sh JJ create test *.
  
  It throws an error as follows
  
  key password store:
  Short-cmd has encountered a problem.
  caused by:
  Keystore was tampered with, or password is incorrect
  caused by:
  Password check failed
  
  
  When you create the security key, I used weblogic as username weblogic11g password and the paraphrase as welcome123
  
  Please let me know what can be the key Store Passowrd...
  
  Thanks
  Vincent
  
  Published by: 954877 on April 9, 2013 22:47

  Passwords are case sensitive - maybe you accidentally typed Welcome123 as the ssl password, you could try that. Perhaps it would be better to re-create the field or to regenerate and to deploy SSL certificates.

• Can I use the same Weblogic Server for soa suite 11 g and OSB panels?

  Hi all
  
  Is it possible to use the same server weblogic for SOA suite 11 and OSB?

  Hi Arun,

  SOA 11 g is running on weblogic version 10.3.2 OSB is running on weblogic 10.3, so you can't have two SOA suite 11 g and the OSB on weblogic even (not EVEN in the two areas of same weblogic). You must have two facilities of weblogic. (at this time)

  After the next release of OSB (planned for H2), you can run both the same weblogic.

  Kind regards
  Anuj

• The 10g application server installation

  Hello
  
  I have Windows 2003 is installed on a virtual machine, I also have Oracle Database 10g release 2 (10.2.0.1.0) installed and configured, I need to install Oracle Application server release 2 (10.1.2) to the same server, is this applicaple?
  
  Also although the application server will install a database, this database will use the same port 1521. is it possible to change the port. I tried that to change the listner.ora, but it does not work for me.
  
  Thank you for helping me.

  It is possible, in the DB change listener.ora the listener from 1521 to 1522. And when you start the installation of the OAS 10.1.2 consider using another Oracle Home thus Instance name so you don'r something rewrite by misstake.

  greetings.

• I used Microsoft Producer to synchronize audio and the slides in a presentation, power point, the question is to know how to put it in the form of a PowerPoint presentation file and burn a cd.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • using microsoft producer for PowerPoint for syn
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        What version of Microsoft office PowerPoint that you are using?

  The money given the article gives you follow the steps on how to publish in Microsoft office PowerPoint 2003, I suggest you follow the steps mentioned in the link given below.

  http://Office.Microsoft.com/en-us/PowerPoint-help/produce-computer-based-training-with-PowerPoint-producer-HA001222910.aspx

  To burn a CD or DVD, I suggest you follow the steps mentioned in the article below.

  How to copy information to a CD in Windows XP

  http://support.Microsoft.com/kb/306524

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In the face of the question and try to set the affinity through VCO workflow rule

  In the face of the question then to attempt to set the affinity through VCO workflow rule I'm trying to write workflow VCO to set up the level of affinity of cluster, but it throws the error message cannot convert ClusterComputeResource 'mycluster' to com.vmware.vim.vi4.ClusterConfigSpec (Workflow: create vm-virtual machine affinity rule / Scriptable task (item1) #19) my script to workflow is var rule = new VcClusterAntiAffinityRuleSpec(); Rule.Key = - 30; Rule.enabled = true; Rule.Name = ruleName; rule.userCreated = true; Rule.VM = MV; var clusterSpecRules = new Array(); var clusterSpecRule = new VcClusterRuleSpec(); clusterSpecRule.operation = VcArrayUpdateOperation.add; clusterSpecRule.info = rule; clusterSpecRules.push (clusterSpecRule); var clusterSpec = new VcClusterConfigSpec(); clusterSpec.rulesSpec = clusterSpecRules; var m = computeCluster.vimHost //spec = task = computeCluster.reconfigureCluster_Task (computeCluster, spec, true); Note: In the above code, what are the entry parameter computeCluster entered type parameter VC:clusterComputeResource ruleName is a parameter of type String - APR

  Here is the code I use, give it a shot.

  var affinitySpec = new VcClusterAffinityRuleSpec();
  affinitySpec.enabled = true;
  affinitySpec.name = att_ruleName;
  affinitySpec.userCreated = true;
  affinitySpec.vm = att_vmArray;

  var clusterRuleSpec = new Array (new VcClusterRuleSpec());
  clusterRuleSpec [0] = new VcClusterRuleSpec()
  .operation clusterRuleSpec [0] = VcArrayUpdateOperation.add;
  clusterRuleSpec [0] .info = affinitySpec;

  var clusterConfigSpec = new VcClusterConfigSpecEx();
  clusterConfigSpec.rulesSpec = clusterRuleSpec;

  att_task = att_clusterComputeResource.reconfigureComputeResource_Task (clusterConfigSpec, true);

• Purchased video files can be downloaded from the third-party server

  I want to build an aerial video image bank. The files will be 4 k files pulled a multicopter. I have 500 video files. Each file can be 5-6G in size. I can't store these files in British Colombia because the limit is only 250 MB per file. Therefore, I need to store them on a third party server. When a visitor to the site buys a video file with the shopping cart on the spot (via PayPal), I want to know if my Muse built site can join the video file on the third parter server and call to put at the disposal of the customer to download the purchase email confirmation.

  I used these guys for years:

  Sell downloads | PayLoadz

  It costs a little a month but if you want something, turnkey for the size of the file that you are talking about. The downside is that the payment is not integrated with BC or CRM etc., it should be on the payloadz site (unless you start getting fancy with the two APIs, but that's another debate).

• Install Web Premium CS4 Student Edition on laptop after the Question upgrade Windows 7

  I hope that this has not been asked before, but my question is this: I want to upgrade my laptop Windows XP to Windows 7.  But I've heard that all programs be uninstalled after installing Windows 7 on a computer running Windows XP.  I have to reinstall all the programs again to use CS4 Web Premium.  But my student edition says that I can only install the program on two computers.  Does that mean I can install the program twice, or can I still install on the same laptop after changing the operating system (I installed CS4 on both computers, my computer, laptop and desktop)?  I want to continue using CS4 Web Premium on my laptop but I'm worried I won't be able to install it because I installed CS4 on my laptop and desktop (two installed already).  I would like to know if I can install on the same laptop after upgrading to Windows 7.  Thanks in advance for the help.

  WebMacro123

  The question isn't installation... it's activation. Disable the software first. (Help > deactivate from any application).

  Back up all your data, preferences, etc. because, as you note, it will be a clean install of Windows. Know that it is only cool method to upgrade a Windows installation. NEVER don't upgrade a Windows in place (or, IMO, Mac OSX).

  Bob

• Is there a difference through the add printer from the Menu then simply open the print server in the Explorer, and then right-click on the printer you want, and then hit?

  Add a network printer (add printer vs right-click-> Connect)

  Hey just have a quick question that I can't find anywhere.

  To add network printers is there a difference through the add printer from the Menu then opening just the print server in the Explorer, and then right-click on the printer you want and pressing on connect?

  Hello Doughty08,

  No, there is no difference. Both methods will install the same printer available driver and the two will work the printer even.

• Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?

  Cannot install network printer on Windows 7.  Detects the printer then it says cannot locate the driver.  All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions?  How can I fix it?
  Windows Server 2008 network.  Printers have ip addresses. Install the drivers from the Print Manager.  /Terminal Server Workgroup installation.

  It's the same situation with XP.  The print driver names must match.  If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer.  This is just my assumption, please correct me if this isn't the case.

  The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1