In the form of triggered no data found and unmanaged user-defined exception

Similar Questions

• You are not allowed to open the form ORA-01403: no data found

  Hello

  I created a new forms of Oracle 10 g. It compiles successfully, but when it is open, it gives an error message: you are not allowed to open the form ORA-01403: no data found.

  I am already connected to the database. Please can someone help what is the reason of this problem, and no matter what possible resolution?

  Looks like you have some kind of security is enabled.  However, because you do not share details about your environment or what you're doing here is not that we can do is guess.

  • Exactly what version of forms do you use?
  • Exactly which version of the database that you are using?
  • You use something like Oracle E-Business (e.g. template.fmb)?
  • You created the form with Oracle Designer?
  • If you create a simple form using only the layout assistants and the DataBlock compared to schema Oracle demo (SCOTT), this form run?

  No additional details describing what you do or have done could be useful.

• Problem with the currency in the form of exchange rate data

  Hi Experts,
  
  I have a problem in the form of exchange rate data. I created an application with several currencies (EUR, USD, INR) and I created a data form for the exchange rate. All work well, but all in am going to enter data for a given entity, then it is allowing me to enter only in local currency. I also need to enter data into its reference currency which is not possible for me. I tried the option allow multiple currencies per entity, but it does not work.
  
  For example: assume that the entity is in North America whose base currency is the USA but can not enter by the selection of currency local option when I select the currency like the US, is to show am only read, not able to get into the currency of the United States. But I need to enter data by selecting from the USA.
  
  Please help me on this.
  
  Thank you and best regards,
  Combot

  923621 wrote:
  I use built in currency conversion. The data that I entered the local currency saving in my base only currency, but my requirement is that the user must enter data by selecting its local currency (people of North America must select USD to enter data and Indian must select INR to enter data like that). Is it possible to like this.

  Select USD as the base currency for the North America and INR for the India (which is how it should be).

  So, whenever the user has to do the data through forms of data entry, it would be on the local currency and after the calculation is run it could fill its respective currency.

  Concerning
  -SM

• I recently started to receive bank statements in the form of files PDF - can open and see them just fine, but how can I save to a folder on my computer?

  I have recently started to receive bank statements in the form of PDF files - can open and read files fine, but how can I save the files to a folder on my computer?

  The best way is to right click (Ctrl-click on Mac) on the url that you use to save the file on your computer. If you have a pdf file open in your browser, move your icon to the bottom of the screen, there should be a contextual toolbar. Click the floppy disk icon to save the file.

• Allow users of readers to save the form in pdf with data

  I want to create a form that a user of adobe reader can open and save a copy as a pdf with the form data. I know that requires the reader extensions - what I can't understand is if I already have this included and how. I have LiveCycle Designer ES 8.2 - which is the download that I find myself searching LC with the reader extensions.

  Does anyone have instructions on how to do this or know if the feature is available in the version I am running?

  You can add the right to drive Extesnion to save the form with the data locally in two different ways.

  1. in Acrobat Pro allows to open the screen and under the guise of Advanced/extend in Adobe Reader will guide you through a wizard. Once the wixard is finished, save the file and use that one. This technique is limited to 500 users per license.

  2 LiveCycle Reader Extensions Server has a User Interface that best you select the rights you want. There are no imitations luser to this option.

  If you do not have to either option 1 is much simpler. You can download a trial version of Acrobat Pro and try it out.

  Paul

• Is it possible to add layers of replacement in the form of script to CA? And the arms of mirror, as well.

  I would like to be able to replace the hands that I drag his arms around, so they move to different punches or pre-made hand positions on different layers. Would it not possible this feature of script?

  And I wish I could click a button to activate the mirror effect of the arms as one is being dragged and saved.

  That might work. Another character option: you can also associate different forms of hand with different keyboard triggers and trigger the correct forms of hand manually by pressing the keys of the trigger at the right time.

• How to get the ID of a single data centre and the Cluster

  Hello

  We have a product we need get the detail of data centers, Clusters, the Esx host and all Virtual Machines of a Virtual Center. And keep it in sync with the VCenter. I use a thread that queries the VCenter every 5 minutes and retrieves the data.

  We use Java VI SDK 4.0 for this.

  At the present time I am able to read all the details using PropertyCollector. But once a data center is renowned for my application, it is similar to a fact that a data center with the old name has been deleted and a data center with the new name has been added. For this reason, when data center is renamed, I remove entities for the former my application Esx host and adding new features to the ESX hosts in new data center. It causes a lot of unwanted things.

  So, I want to go get some unique Id of the dataCenter and Cluster, so that when a cluster/datacenter is renamed, uniqueId is always the same and my app will be able to know that it is just a change of name. And entities for ESX/VirtualMachine will be kept.

  Please, help me to know the unique id of the cluster/datacenter.

  Thank you

  Deepak

  Yes, there are supposed to be unique UUID generated by vCenter or ESX (i) and if you have not manually mux with values. The UUID is guaranteed to be unique within a given instance of vCenter.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• How so avoid during a search, opening a new page or using the mouse-it flips page not found and "cltrda".

  How can I prevent the "page not found and cltrda information opening instead of my search?

  Try to use the extension SearchReset reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/about:config

• Can I partition my C: drive without data loss and transfer user files to the new?

  I have a pre-installed windows 7 Home Premium(64-bit) on a computer laptop DELL studio. Unfortunately, it only has drive C and no partition at all. Therefore, it is possible to create partitions without risk of loss of data (System and user)? If so, is it possible to transfer all the files from the user to the new one system files and all stay in C.

  Rodney

  Partitioning itself has no impact on performance. You can get slightly better performance by how you distribute folders and files on a partitioned system but I would not partition to eliminate program freezes. It's the wrong way to tackle the problem.

  There are many reasons for freezes.

  Freezes occur mainly because the task or tasks require more memory or one that is immediately available to the capacity of the CPU. The solution is to increase what is available or to reduce demand. You can do both. How to do this is much more complicated. It depends on what element of hardware is causing the bottleneck. If memory is limited, it can be simply remedied by adding RAM. If the problem is the capacity of the CPU, you will find that increasing capacity is often not practical to replace the often average CPU processor replaced motherboard, operating system and other equipment doing expensive exercise... Change the hard drive could help, but switching to an SSD is also expensive. If the processor is the problem, then demand reduction is often the way to go.

  If you are resolved to reduce the demand, it can significantly improve the performance if you delete the browser add ons such as toolbars and search engines that are not necessary. Most of the time when you install the new software you will find recommended add ons. You must learn to say no when they duplicate what you already have. Add on can hide malware, including spyware, reports how you use your computer. Do not believe the bland statements like 'works quietly in the background. It's more than one spin. Multitasking may be good, but it can provide performance problems. It translates into a surplus of supply over demand.

  Another cause of gel can be for lack of material, most commonly, the hard drive, RAM wiring associates or defective. These flaws are often easy to detect, but not always the case. You must also make sure that you have the latest version of the BIOS and motherboard drivers. They can be updated on a brand new computer if the person selling you the computer is not updated immediately before restore you the computer.

  If Frost always involves the same programs uninstall and reinstall the program, and you make sure you have the latest updates. You can also use Google to find out if others have or have had the same problem. Focus your search by using keywords, descriptions of the extracts may event viewer and limit the results to those within 12 months.  Many programs have dedicated forums where other users may be able to help.

  A gel is often the result of a malware infestation. In this case do not rely on your existing software. You need to perform analyses with software like Malwarebytes and Superantispyware. Perverse freezes may be caused by security software. Norton and McAfee are known to be involved, in particular where the computer has limited the capacity of RAM and CPU.

  Poor or no maintenance will result in poor performance. You must have a maintenance routine. This can include compaction (some e-mail programs) and should include the cleanup with cCleaner and disk cleanup and defragmentation. You must make sure that the partitions have at least 20% of disk space. You do not defragment SSDS.

  You must use the tools on your computer to look for clues as to what is happening. More you use, the more you understand what they say. The most useful tool is event viewer, although many users, it is difficult to interpret.

  You will find many sites on the internet promoting the use of registry cleaners and optimizers to maximize the performance of your computer. They are promoted by the spin and the hype. The truth is that their use causes finally grief when you use to reinstall windows to eradicate the mistakes of the system they have caused.

• The views using materialized for data warehousing and reporting

  Hello
  
  I would better understand the materialized views in Oracle in particular the use of the option: REFRESH QUICKLY ON COMMIT. The oracle database, we care is a PLM application and any of the tables to apply using the primary key constraints. Instead, the application uses a separate schema to store the key values for each object/save in the database. I would use Materialized View to the creation of a data warehouse smart to transfer only the lines that have updated since the last refresh of the warehouse. My understanding of the materialized views you can't define a until and unless you have a primary key constraint. It's fine and understandable.
  
  Can we have an oracle separate sid something like WSHD - data warehouse and using the database between the main site links - site WSHD always transfer lines that have changed since the last refresh with REFRESH QUICKLY ON COMMIT option? (Note: this is taking into account the fact that a database primary key constraints defined on the paintings of masters.)
  
  I guess you have to install MV NEWSPAPER tables on the main table and then create a materialized using option QUICKLY ON COMMIT REFRESH view?
  
  Am I wrong?
  
  Will there be another option for the transfer of the lines of main tables in the data warehouse in Oracle?
  
  Thank you very much.
  
  See you soon.
  Rohan
  
  Published by: José on 10/01/2009 00:21

  1. you can't define a materialized as ON COMMIT REFRESH in a separate database view. It must be in the database even if it's to refresh commit it.
  See http://hemantoracledba.blogspot.com/2008/06/mvs-with-refresh-on-commit-cannot-be.html

  2. you don't have to have a primary key to set a MV. You can set a MV WITH ROWID (except if you re-create the source table, you need to do a refresh of the MV because ROWID changes).
  See http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_6002.htm#i2063793

  Hemant K Collette

• Fail validation in a table with the "user-defined Exception.

  Version 4.1.1.00.23

  Hello

  I get the above error on a tabular presentation (generated by the Wizard) when a Validation error is displayed.

  I have found two references to this question without a solution though:

  https://community.Oracle.com/message/10481160#10481160

  and

  https://community.Oracle.com/thread/2370356

  In the first link he refers to a MRU missing on the page. There is a MRU on the page and I deleted the Condition of when you press button-> SAVE no condition.

  The second link refers to a popup LOV KEY I have and it's query in function. There are too many files for a Standard LOV.

  The Validation error is displayed, but the shape of table is not displayed and the error message.

  I have 6 filters on the page and they all LOV Standard default values are defined for each element. This is also confirmed in the window Session.

  This is the screenshot of Validation:

  

  This is the capture of the screen Session window:

  

  If anyone can help with this?

  Can what information I provide?

  Thank you

  Joe

  Hello

  I created an example on apex.oracle.com

  Workspace: joer

  United Nations: dev

  PW: dev

  Request: operating 82118 point Validation error

  BUT there is another problem!  The page does not work!  I get:

  Failed to parse the SQL query:

  ORA-01445: cannot select ROWID, or sample, join without table views preserved key

  The WORK_ITEMS table has a primary key, INSERT trigger for the sequence.

  All database fields are referenced to the table and I use not matter where ROWID.

  Other than the page is defined even in my environment.

  Can what additional information I give?

  Thank you

  Joe

• retrieving data from columns of user defined type

  Abstract types, I learned the other day. So I created an abstract type and a table.
  
  Create the student_ty as an object type
  (name varchar2 (20), number of roll);
  
  create table result)
  Student student_ty,
  (total);
  
  
  
  I also inserted data. But I'm having some trouble with the rretrieval of data. Suppose I want to choose only the roller and the name of the student as described in the type of studen. So I used the follwing query: -.
  
  Select result student.name;
  
  But it's not working. But when I use something like this: -.
  Select r.total, r.student.name in result r;
  
  
  This works perfectly. My question is that it is a rule that oracle needed to use an alias, whenever retrieve values for a user defined type data?. Help, please.
  Thanks in advance.

  Yes, you can use an alias when the type of object in a table like this.

  select r.student.name, r.student.roll, r.total
    from result r
  

• Why I'm not able to associate the user defined exception with ORA-01403 error code

  why I am not able to

  Associate a user defed exception with ORA-01403 error code?

  declare
   myException Exception;
   pragma exception_init(myException ,-1403);
  
   begin
   raise myException ;
  Exception
  when myException  then
   dbms_output.put_line('raised due to myException ');
   end;
  /
  

  exception of ABC;

  *

  ERROR on line 2:

  ORA-06550: line 2, column 4:

  PLS-00701: ORACLE error-1403 of PRAGMA EXCEPTION_INIT illegal number

  ORA-1403 is an outgoing BOF NO_DATA_FOUND exception. And we used to NO_DATA_FOUND in pragma exception_init + 100.

  Thus, instead of the you can used this different exception code which is not associated with any exception.

  For example:

  declare

  Exception myException;

  pragma exception_init (myException,-7856);

  Start

  raise myException;

  Exception

  When myException then

  dbms_output.put_line ('high due myException');

  end;

• Create the form for enrty of data such as oracle forms tabular block by ADF Table!

  Hi guru and Experts
  
  I need some solutions for Oracle JDeveloper11g which is very essential for me.
  
  + Q1. Is it possible to create a form master detail which block detailed will be a tabular as like oracle forms . If possible I such example? +
  
  Q2. How can I create a preview to the point like oracle forms overview at the point of tables?
  
  Q3. How can I add LOV/list items / check for a table/table column?
  
  Q4. If it is possible to insert a new record in the table of the ADF, so I need to save all your data by pressing a key SAVE event
  
  
  I wish you all already taken I want developed. Please give me a better solution.
  
  
  
  Thank you.
  Zed
  ====

  A correction to the above – if you want the table to be modified/inserted you cannot drag and drop as a master-detail, because the detail will be in read only mode.
  Instead first drag the captain and drop as a form of ADF
  Then, drag the details below and drop it as Table of ADF.

  You can drag since the operations node in the data control the operation createInsert to add a button that will add a new empty row to the table.

• Model for the form field option is not found

  Hello - when I tested the echosign function I was able to implement a model of form field that I could then apply to a future document so that I didn't have to recreate all the fields if I replaced a page or change the text under.  Now I am an annual subscriber, I don't think this feature.  Any ideas?

  Hello Emily,.

  The trial version does not have the ability to create the layer of form field model and if you went to the same enterprise-level plan, then the feature would still be there, but if you upgraded your account to 'Send for Signature', then he has that.

  -Usman