In XP, receiving c:/runtime error, the application must put end to
each while or then a box will appear indicating c:/runtime error and the application needs to terminate in an unusual way, I click Cancel and it goes away but will come back periodically... help?
Hi AleezaMeira,
1. did you of recent changes on the computer?
2. you receive the error message when opening any program on the computer?
3 when was the last time it was working fine?
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
Tags: Windows
Similar Questions
-
Original title: initialize 0xc0000135
When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?
Walter Rodriguez
E-mail address is removed from the privacy *.
10/07/12
14:57
Hello
1. do you receive this after you see Start button or entry?
2 have you made any changes to the computer before the show?
Method 1: Boot errors are fixed by the clean boot.
Perform the clean boot and see if that helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.
Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.
I suggest you make a system full scan just to be sure.
Here is a link that will give you information on how to perform a full scan of the system:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
, Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
I installed half life episode 2 1 in the Middle, the following message is displayed on the game screen and game hung when I click on the game stopped following message - microsoft Visual C ++ Library Runtime error - this application has requested the execution unusual way. -.
Hello
I suggest you follow the link and check.
-
SE runtime error shortened application on my Vista computer
I run windows Vista and use mozilla firefox. Its a Fujitsu siemens computer.
Access my wireless, I have to press Fn and F1
I have checked my (6to4) wireless adapter in Device Manager and get this error message that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). I also have a network adapter wireless Atheros AR5007EG, which seems to work very well, but can not use the wireless on my laptop.I tried drivers udate but that comes by saying that they are up to date and also tried searching for solutions, but nothing comes back.
* original title - I get runtime error shortened application on my computer, and then it keeps closing. Now my wireless keys do not work. Can help you with a soultion? *
HelloYou can follow below link that can help you to solve your problem:Error message when you attach a PCI Express expansion chassis to a computer that is running Windows Vista or Windows Server 2008: "Code 12" or "Code 31"If nothing works, try to uninstall and install the drivers for your wireless network adapter
Remove the driver for the card
========================1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
2. expand "Network adapters", double-click the entry for the wireless network device.
3. click on the "Driver" tab, click "Uninstall".
4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
5 remove the entries related to the wireless network adapter.Reinstall the driver with your driver CD. After installation, create the connection.
Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.
Note: Please make sure that you have downloaded the drivers or have a driver installation disk before you uninstall the drivers for the network card
-
Error "the application"Steam.app"is not open more."
I use Steam to play games, I recently installed Trove which began to hang Steam (and not run) rarely when I clicked on the play button.
Sometimes, when Steam closes (or hangs in my case), when I try to open it again, it gives me an error "the application"Steam.app"is not open more.". It can be fixed by restarting, but it's boring and useless. How can I fix it?
Restart the computer in safe mode. Some caches maintained by the system will be rebuilt.
Safe mode is much slower to start up as normal. The next normal boot can also be a bit slow.
If you use no FileVault 2 in OS X 10.7 ("Lion") or later version, you can restart as usual (not in safe mode) when the login screen appears. There is no need to log on in safe mode.
If you use FileVault 2 in OS X 10.11 ("El Capitan") or later version, or if you don't know if use you it, you as usual then connect in safe mode, and then restart (not in safe mode.)
If you use FileVault 2 in OS X 10.9 ("Swat") or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you cannot start in safe mode. In this case, request further instructions.
-
Original title: microsoft security scanner is Guy accounts.
It shows the following error - the application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. can u please help?
Hello
You can uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.
Method 1:
Step 1: To uninstall the package:
a. open programs and features.
b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.
c. click on uninstall at the top of the list.
Step 2: Download and install the latest package and see if it helps.
Before you download, you can check am I running the 32-bit version or 64-bit Windows?
For 32 bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 86)
For 64-bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 64)
Method 2:
You can try to perform a clean boot and check if it helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.
-
On my laptop Dell Studio 1555 with 32-bit Windows Vista Premium (with SP2), as soon as I connect, I get an error "the application BTTray.exe does not able to initialize correctly. Click OK to terminate the application". Then another pop-up window appears the error information. After awhile, it prompts you to close the program. This happened since I updated the Bluetooth Widcom software from the DELL Web site. I tried to uninstall the software and put it back in place for the DVD that comes with the laptop. But that did not help.
Yesterday, when I tried to connect to the remote Citrix server, so I was able to work remotely, I got the same error for the software Citrix, "the application failed to initialize properly wfcrun32.exe. Click OK to complete the program." Then another pop-up window appears the error information. After awhile, it prompts you to close the program.
My colleague, who also has a laptop with Vista home is able to connect to Citrix without any error. He said he did a lot of configuration changes in the security features in vista.
Is could someone please help me get rid of these annoying errors?I came across a similar story, while answering a different question, earlier today. It seems to involve Dell machines and a corrupt file of the MFC80.dll. If it's useful to you or not, I'm not sure, in any case, you would like to read this link.
2.0 secure Local data RMCPlg.exe and BTTray.exe errors
http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&DL=false&l=en&s=Gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=enThe previous post, I referred to was this one.
The Groove application error
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/10c8f8d6-D225-481e-99CA-4e048d401c2c -
I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:
"Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details"
-how can I solve this problem? I have Windows 7.Hello
Thanks for choosing Microsoft Community to post your question.
It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.
We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).
Here are a few troubleshooting steps that you can try to solve this problem.
Method 1: we will install Microsoft Visual C++ for your computer package.
Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).
If you use the 64-bit operating system, download and install edition(X64) 64-bit.
Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=enMicrosoft Visual C++ 2008 SP1 Redistributable Package (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=enPackage redistributable Microsoft Visual C++ 2010 (x 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84
Package redistributable Microsoft Visual C++ 2010 (x 64)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867
Method 2: Run the fixit available at the following link.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Also, check the event log using Event Viewer.
Please see the link below for more information on how to use Event Viewer to check the error message or information,
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
If you have additional problems, please reply to this post and we will be happy to help you further.
-
«WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»
This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.
I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.
I don't know what to do.
Hello
You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
Method 1:However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Method 2:You try to run the fixit given in the following link and check if it works:Method 3:You have recently updated with Microsoft Visual C++?I hope this helps! -
Lightroom.exe - application error: "the application could not start correctly (0xc000007b). Click OK to close the application. »
I use lightroom 5.
Please see the troubleshooting link: Solutions for Photoshop Lightroom 0Xc000007b error
Kind regards
Mohit
-
I can't install Creative Cloud in test mode. Download After Effects and Media Encoder, when starting error: the application failed to start properly 0xc00001d. Click OK to close. I'm back to download, etc., but the error persists. What is the solution?
It is a microsoft error message. Google it.
If you decide to reinstall an adobe program, clean after uninstall and before reinstalling through use of the Adobe Creative Cloud cleaning tool to solve installation problems
-
Hello!!! I have a problem. I have windows7 64 bit, download cc 2015 first and I can not open. I see error "the application was not properly restart 0xc000001d.» Click OK to close the Clik"I feel the same with After Effects. I have installed and uninstalled several times and tried different computers and I feel the same way. Anyone know what it can be? Thank you
Update first Pro CC 2015 (9.2).
Thank you
Kevin
-
I recently had to create a new disk and install the full version of Windows 10. I can get all my apps Cloud creative install, but first Pro Crash when I try to run it. I get the following error "the application could not start correctly (0xc0000142). Click OK to close the application. I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error. Has anyone seen this one? My setup is below:
Hi PK Gary,.
I recently had to create a new disk and install the full version of Windows 10. I can get all my apps Cloud creative install, but first Pro Crash when I try to run it. I get the following error "the application could not start correctly (0xc0000142).
Update for Premiere Pro CC 2015 (9.2) for a fix.
Thank you
Kevin -
CS6 Master Collection CS6ServiceManager.exe - Application error: the application is not
After you have installed the trial CS6 MC version I get CS6ServiceManager.exe - Application error: the application failed to start properly (0xc0000022). Click OK to close the application. This error message appears after opening any program in CS6
Thank you for your interest,
He had trouble downloading and not all programs have been installed correctly. It took three downloads and uninstalls cs6 to do things. The error message was popping up constantly and Premiere Pro would crash. I've narrowed the problem to Adobe Air. I uninstalled and reinstalled and the problem was solved. Moreover, the operating system is Windows 7 (64)
Thank you
Johnnyblas
-
I try to connect to the creative cloud on my MacBook Desktop App and sees only a spinning wheel where the application must be open. On a related note, I'm signing CC because I thought that my Lightroom Develop module is disabled. Clues?
Mac https://forums.adobe.com/message/5470608 spinning wheel
Maybe you are looking for
-
Is anyway that I can transfer my videos from cam Sony (which uses miniDV) for HP dv6-1355dx who doesn't seem to have i.link/firewire port? Is it possible to add the i.link port? ExpressCard works for my laptop? Thanks in advance
-
Based on file format is not write to file, if there is an error defined by the user?
While using the function in file to create a text file of some test results, I've noticed that if there is an error format on the error stream VI seems to work fine, but the Format of the file function is not actually write data to the file. I never
-
2 problems that occurred at the same time - shift key & problem mouse
I copied and pasted an email address into a new email. Now, whenever I press the SHIFT key, it copies the same thing several times in the format of electronic mail and WORD. In addition, my mouse now I cannot hold the left key to highlight words. N
-
windows messaging has a max I can access deleted items I want
-
Oracle Grid installed... so?
Hi everyone, this is the scenario, I have successfully installed Grid and has been installing Oracle db, shared file system got plenty, because using vmware had no idea how to fix it, tried to add space and that damn this drive shared.I had to remove