inappropriate and offensive image ads
How do the ads inappropriate and offensive to women to stop popping up on my computer on the right side of my screen?
Hello
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
Tags: Windows
Similar Questions
-
I have iPhone, iPad, and a PC with Windows 10. I find that I can download photos and other images to iCloud. But miss me scans PDF documents that I made using Readdle Scanner Pro. Can I get these too?
Hi there, Bill-to-ipad!
Thank you for using communities Support from Apple! From what you have posted, I understand you want to download the PDF files that you have created. I can definitely see the convenience which provides for the establishment, and I'd be happy to help you with information on how you can do it.
iCloud drive will allow you to share documents, such as PDFs, in all of your devices. The following article will help you get iCloud drive configured on your iOS devices and your Windows computer.
Implement the iCloud Drive on all of your devices - Apple Support
I would also check the following article, the link that will give you some more information about iCloud drive and it can do for you.
See you soon!
-
Firefox is ignoring "Save Page As.... "and" Save Image as... ". »
Create a new profile as a test to see if your profile is the source of the problems.
- Basic troubleshooting - a new profile
- Now, launch Firefox with the new profile.
IF this new profile works, then you can retrieve your history, bookmarks and passwords from the old profile.
Check and tell if its working.
-
I have a problem with something in firefox, it is quite minor, but still bothers me. Last night suddenly when I right click view image in firefox, they appear centered and on a black background. He is generally meant to be a white background and the image that appears at the top left. I don't remember what I did to change this if it's my fault; If anyone knows how to get back to it, I would be grateful.
This is the new behavior in Firefox 11.
- Old Style of default Image: https://addons.mozilla.org/firefox/addon/old-default-image-style/
See also:
-
Hi, I have problem in my IPhone 6 more is the focus and blurry image when turn what to do?
for example, please find the attachment.
First check if your iPhone is eligible or not: https://www.apple.com/support/iphone6plus-isightcamera/
and if your iPhone is not affected, so go here: get help with the camera on your iPhone, iPad or iPod touch - Apple Support
-
Address bar URL and FavIcon image do not update until the user clicks the Site identity button
I noticed that each time the Site identity button is gray (i.e. most of the time), when you navigate different pages on a web site, the address bar does not change and just continues to show the root of the domain, for example "eircom.net" when the actual URL can be 'http://entertainment.eircom.net/movies/'. the real URL is not revealed until I click on the Site identity button. I get a pop up of Firefox "this website does not provide identity information.
the URL of the previous page/site (and the image of the FavIcon) are left in place until I click on the button.Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Satellite U400-112 - WoW problems and the image is not good
Hello!
My laptop is Satellite U400-112 and matching video Intel X 3100.
When I play in openGL, 3D graphics on minimum and the image quality are not good. The same situation with Direct3D even worse. I have a guess - the game not installed, I copied the folder with the game on another computer, maybe I need to reinstall? I installed the latest drivers for the video of the official website of Intel.
Maybe someone have the same problem and can help me to solve it.
Hello
This only happens on the world of Warcraft or in other games too?
I'm a bit confused because you have set the minimum graphics and then you wrote that the photo isn't good in my opinion that's normal as the photo isn't good, if you play on minimum graphics settings.
Maybe you can post a screenshot screen or something else.You also need to update DirectX version on your laptop that you can find on the Microsoft Web site.
-
Could not watch television and the images are black and white on Qosmio
Hi, live Saudi Arabia
I have problem with my TV Tuner. When I scan the channel it is find frequency for some channels, but cannot look at them!also when I try to capture using model-SVIDEO color balck & white that I try to use PAL nothing changed
And thanks for the helpHello
One question; Did you purchse the notebook in your country?
I guess that the black and white image appears on the TV. Am I wrong?
This can happen if the TV doesn t s-video or if the s-video option is not enabled on the TV.In addition, I would recommend to check the version of the driver installed tuner.
Then go to the page of the Toshiba driver and check the version of the tuner driver.
If the new driver is available, so please download and install on the Qosmio. -
I use Origami as my screensaver and changing images quickly, is there a way to slow the progression from one slide to another?
Check in system preferences > Desk Top & screensaver:
Ciao.
-
USRP RuntimeError: Please update the firmware and FPGA images for your device.
Hello
I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.
2009 LabVIEW and NOR-USRP 1.1
When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627
"niUSRP Devices.vi find
a length or configuration error has occurred."
Code: 1440
Details: RuntimeError:
Please update the firmware and FPGA images for your device.
See application for USRP2/N-Series notes for instructions.
Compatibility of the Protocol expected number [7-11], but received 12:
The version of the firmware is not compatible with the host code generation. »I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.
Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.
Can someone help me with this problem please?
With respect,
-Sigurd has.
Hello Sigurd,
The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.
You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.
This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP
-
Hello everyone
is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.
It depends on the image and the module LabVIEW available to you. LabVIEW can open bitmap and png files and convert them into tables: if it's really a monochromatic (depth of 1 bit) you get a table 2D boolean, T for white, F for black. Just look at the index of the item to its details (don't forget that LabVIEW does not use the order of rows and columns, so you must transpose and reflect the table). If you have a 24 bit bitmap, the table will contain the color in hexadecimal synthesis (000000 for black, FFFFFF is white and so on); Yet once, you simply check if the element of the array correspond to your requirements and get its index.
With the vision that you module con open other pictures and perform advanced on them without convert them into tables. Anyway, you can just type the extension of your image using LabVIEW and see what you get.
Here is a code snippet to open a monochromatic image
-
I recently started to use the camera on my Lenovo PC's Yoga and the images and the video several times not to go out grainy. Is there a solution to create clearer images and videos?
I recently started to use the camera on my Lenovo PC's Yoga and the images and the video several times not to go out grainy. Is there a solution to create clearer images and videos?
=======================================
I assume you mean a webcam? There are opportunities
It's a low resolution camera and there is not much
you could do to improve.Granular can also result in low light environments.
Also, I suspect that the camera has a lens made of plastic
and they are not as sharp as a glass of good quality lens.The following discussion seems to be the same camera
you make reference to:Problems of quality of camera video yoga 13
http://forums.Lenovo.com/T5/IdeaPad-IdeaTab-Slate-tablets/Yoga-13-video-camera-quality-issues/TD-p/991189 -
WIFI and Bluetooth image appears on the screen
A WIFI and BlueTooth image continues intermittently to appear on my screen.
If I touch the WIFI switch on my PC, the image opens too.
I don't know if it's an image of microsoft or something else caused by malicious software.
I would like to get rid of this image. Does anyone know how to do?
I could send you a picture of the image.
Thank you.
Hello
- What version of Windows are you using?
- Have you made changes on the computer before this problem?
I suggest you run the fix that it follows and check the status of the issue.
Hardware devices do not work or are not detected in Windows.
http://support.Microsoft.com/mats/hardware_device_problems/en-us
If the problem persists, I suggest you to send additional information to help you better.
-
How can I remove the user name and the image of Windows XP new Start Menu
Two questions:
1. How can I delete the user name and the image of Windows XP new start; and
2. my computer keeps asking me to press the F1 key to start Windows. How to skip this part?
Thank you.
Hello
The image of user account can be removed by disabling the Welcome screen. Or, by opting for the classic Windows theme. Follow the method described in this article, if you want to remove the user name and the picture in the Start Menu, without disabling the Welcome screen and Windows XP theme.
For those who want to delete the user name and the image of user account from the Start Menu, in order to have a blue white Panel at the top, try this:
Registry warning
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/Step 1:
a. start Windows Explorer and go to this folder:
C:\Documents and Settings\All Users\Application Data\Microsoft account imagesb. in this folder, rename the BMP file that corresponds to your user account.
(For example, if your user name is Robert, rename Robert.bmp to old_Robert.bmp)c. then rename the following folder:
C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\Default pictures
to something else, for example,.
C:\Documents and Settings\All Users\Application Data\Microsoft account Pictures\No_Default images.Step 2:
To remove the user name, follow these stepsa. Click Start, click "RUN" and type "regedit.exe" and navigate to this key:
HKEY_CURRENT_USER-Software-Windows Microsoft\------CurrentVersion-policies-Explorerb. in the right pane, the value NoUserNameInStartMenu-value data 1.
c. close Regedit.exe and restart Windows.
You'll find yourself with a blue area at the top of the Start Menu.
Regarding the pressing 'F1' to start Windows, you have made no changes or was there a system crash after which the problem started?
You may need to change the boot sequence in the BIOS to the default settings. I recommend you contact your PC vendor for this.
Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. -
Emulator CVS displays bitmap color black and white images
I use a VBAI2009 inspection on 1454 CVS which uses a camera firewire AVT Guppy F - 036C. This system is on a production machine inspect the product we make. VBAI uses the legacy IMAQ for IEEE 1394 on a CVS not the driver IMAQ-dx cameras. The VBAI script contains several steps function color inspection. To get the AVT camera to display the color, I had to install the files of MAX camera using the Bayer color tab because Bayer settings are not accessible from the driver on the CVS IMAQ. I'm no adjustment of the camera of the VBAI. This configuration works well and has worked for 6 months on the machine of production without any problem.
Now, I need to edit the VBAI script but can't stop the machine to make the changes and test the program. I captured images bitmap using MAX during the inspection was installed 6 months ago and they stored on my host for just such an occasion. I am using these captured images and the CVS emulator in VBAI to make the changes to the program offline. I performed the inspection under the CVS emulator and the acquisition stage is configured to point to the captured bitmap images using the button Configure Simulation settings. The problem I have is that bitmaps are displayed as black & white in the emulator, even if these are images of color seen with paint. I can't find a way to fix this. Is - this problem as a result of using the parameters of Bayer to create the image color or something else in the emulator? The emulator, no installation of color image treats?
Any help would be appreciated,
Mark
The stages of acquisition camera record video mode information used to acquire images. If you use these steps in emulation mode, it converts the type size and the image to match what has been gained for calibration and processing step use the same type of image. Looks like than the stage thought that the image was mono, even if you got it to be color. I will consider how it could have be saved incorrectly when you use the settings of Bayer. In the short term, you can disable the acquisition stage (don't delete so you do not lose the camera settings saved in step) and use a stage of acquisition of simulation or a new phase in the acquisition of 1394 and won't force the image size/type.
Hope this helps,
Brad
Maybe you are looking for
-
Camileo H20 - Arcsoft media - no sound
Hello world I just tried to create my first DVD of my videos of H20. -make different videos (720 p, 1080i)-uploaded videos from the camera to the pc-videos with vlc mediaplayer without problems (h20 creates code h264 videos!)-Run arcsoft media and bu
-
Strange problem with touchpad on Satellite L500-19Z
I have an older one month by Satellite L500-19Z running on Windows 7 64 bit.While using it to edit photos, he began to behave strangely. It was as if someone was quickly down the left button of the mouse. I have been unable to leave any program or us
-
Where is Windows Clipboard files? What directory? I was not able to find this information. I want to get back to a previous screen printing.I didn't not turn off my computer and I did 3 other print screens after that I want to get back because I didn
-
Recently I had to reinstall Vista Home Basic x 64 and among my hardware is a Motu 896HD Motu Microlite USB. Current drivers installed fine on my previous instance of Vista but Vista now allow me to install and told that they can be dangerous and I sh
-
password administrator or power on password hp pavilion g7
I have a blue screen asking an administrator or a power on password. I get this code 51332480... any help is greatly appreciated.