Incompatibility of memory

Similar Questions

• Question about upgrading memory on the Satellite A210-127

  I upgraded my memory form 2 GB (2 x 1 GB) 4 GB (2 x 2 GB) with two modules of memory Kingston KVR667D2S5 / 2G (PC2-5300 CL5).
  For two weeks, he had no problems, but then I got the blue screen every time when the system starts making reference to I guss memory error.
  I tried to replace the memory with original Toshiba but still blue screen modules. I conctacted service and they say that
  It may be the incompatibility of memory, virus or malfunction of the hard drive.
  After a few days of work on the solution I reinstal my laptop Toshiba DVD and replace the original brief. Now everything works fine.

  I wonder is Kingston memory cause of my problem or somethig else?
  Nobody knows is memory Kingston KVR667D2S5 / 2G 2 Gb compatibile with Toshiba?

  Hello

  Honestly, the Kingston offers products of high quality and, I think, you are the first person who complains of Rams from Kingston.
  If you visit the page Web of Kingston you can find a list of compatible RAM. Your module is listed here?

• B130 memory

  I have a Dell Inspiron B130 which I wanted to update the memory. Currently it has 1 GB memory supplied with the laptop when I bought it. The maximum memory that the laptop can be supported is 2 GB.

  Not the 1 GB that comes with the laptop, a single module or is there in fact 2 modules of 512 MB? I didn't know if I just need to buy another 1 GB module or I have to buy 2 1 GB module. Thank you.

  Download and run the free program SPECCY, click me he will describe in detail what you installed, one or two memory modules.

  Dell having a history of incompatibility of memory, most of the technicians here recommend for non Dell memory Crucial memory.

  The following are crucial for the B130

• Satellite Pro 6100 - code beep at startup

  Hi all

  Just picked up a 6100 Pro of the Satellite with a few problems.

  It lights up, he pointed out the HARD drive and I can hear the disk activity. However, the screen remains blank and a single beep can be learned after 20 sec. White screen, as I understand it, is probably the issue of Council power raging in the SP6xxx series. However, the beep I do not understand.

  I know that 2 beeps or 3 beeps is incompatibility of memory but no one knows which denotes the beep?

  Ta

  Hey Buddy,

  To be honest it's not easy to say what the cause of the problem because it could be everything and Satellite Pro 6100 is old enough for laptop.

  You have two memory modules RAM? If so remove a module. Always try a module only at the same time and test it in the slot of RAM A and B. A module is may be defective or a slot.

  If this is not the case, there seems to be a problem with the motherboard or the CPU itself. If you can exchange these things, try it yourself as a repair would be too expensive for this good old classic I think.
  Second hand spare parts you can get it on eBay s worth a try! ;)

• On firefox memory leaks cause blue screens?

  On firefox memory leaks cause blue screens?

  If you encounter blue screen crashes, this majority refers often to an incompatibility with a device driver, especially the graphics drivers. Go to Firefox Safe Mode and disable the use of Firefox hardware acceleration of graphics.

  Assuming that Firefox is closed:

  Hold down the SHIFT key when you start Firefox. You should get a small dialog box. Click on 'Start mode safe' (not reset).

  (If Firefox is running, use Help > restart with disabled modules to call the dialog box.)

  In Firefox, open the Options of the Advanced tab dialog box:

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  This will take effect after you exit Firefox and start it up again (in normal mode).

• Can not correct 'incompatibility of cookie.

  use a web page to about 2 months of access email through google mail. Now open in Explorer. Have you tried the suggestions online to solve the incompatibility of cookie: clear memory cache but has not worked. Tried to uninstall and reinstall Moxilla but has not solved.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Satellite A100-233 - what memory I need?

  Hello

  I have the Satellite A100-233 and I want to increase its memory. The question is, if my card MOM, can I put DDR2 memory with 667 MHZ speed or I use only 533 MHZ?

  Thank you

  Hello

  It according to your chipset you ;)

  If you want to just buy a second memory module, I'd be the same module as the first. So that you know its module is compatible with the laptop and normally two identical modules must be used in the book to avoid problems of incompatibility.

  But as far as I know A100-233 can handle up to 667 MHz modules. If the first module runs with 533 MHz, the second module will work also on 533 MHz. This means that the modules are compatible downgrade.

• Y430A can not boot after memory upgrade

  OS: VISTA HOME PREMIUM 32-BIT
  CPU: P7350
  MEMORY: HYNIX DDR2 667 2GB

  I added a 2 GB Kingston ram on the connector 2

  First of all, it can be the start and connect to windows,

  but after a while, the system of suspension or the SCREEN BLUE DEAD shows,
  He cannot even get into the bios screen when I reboot it

  but it can be boot up if I remove and reconnect the memory

  Sometimes the machine can be restarted and works correctly, except if once I turn it off

  I tried to exchange the slot 1 and 2 with 2 x 2 GB,

  and also replace with 2 x 256 MB Hynix memory.

  but it does not work.

  The new memory is not faulty or is not compatible because it works very well if it autonomous.

  In short, if I install 2 x 2 GB memory, the system may start only once.

  Is it the BIOS problem or it's my mistake?

  Please help and sorry for my bad English.

  Thanks in advance.

  This is perhaps due to the incompatibility of the modules of RAM, working together. If Yes, than to change only the modules will help.

  Also looks like Y510 behavior when it was a fresh model - Y510 all were not able to manage two RAM modules. Update the BIOS helped. For now no new BIOS for Y530/Y430, so will have to wait.

• Use of FIFO memory on two areas of clock (Labview FPGA) block

  Greetings!

  I'm developing an application on the FPGA of the vector signal OR 5644R
  transmitter/receiver. I have two loops single-cycle timed: a 40 MHz making a convolution
  and writing a FIFO memory block and the second at 120 MHz (sample clock)
  who reads from block FIFO memory and uses the following values
  interpolation...

  Under what circumstances is it permissible to use a FIFO memory block to transfer

  values of a loop from 40 MHz to a loop of 120 MHz (sample clock)?

  The reason I ask the question, it is that the compilation of my code repeatedly of not
  reported the error below:

  ERROR: HDLCompiler:69 - "/ opt/apps/NIFPGA/jobs/J9k7Gwc_WXxzSVD/Interface.vhd" line 193: is not declared.

  I share for everyone's reference, screenshots of my code which is an extension of

  sample 'Project streaming VST' given in NI5644R. A brief description of attachments is

  given below...

  1. "Top_level_FPGA_part1_modification.png": in a loop SCTL 120 MHz, a sub - vi bed FPGA

  go a block FIFO memory... In fact, the reading is actually made when entry

  "read_stream" is activated... (see details in read_from_fifo_true_case.png)

  2. "Top_level_FPGA_part2_modification.png": a 40 MHz SCTL, wherein is a subvi FPGA

  called to write the output of convolution to block FIFO memory.

  3. "target_respone_fpga_block_FIFO_modification.png": an output of a convolution filter is

  written in block FIFO memory each time that the convolution output is available...

  'ReadBlockFIFO' VI (circled in Top_level_FPGA_part1) is invoked in a 120 MHz SCTL.

  4. "read_from_fifo_false_case.png": when the input "read_stream' of this vi is false,

  data transfer memory FIFO of block to a different FIFO ('generation filter") takes

  place.

  5. "read_from_fifo_true_case.png": when the "read_stream' is set to true, the data is read in

  'Filter generation' FIFO and spent on the chain of later interpolation to the

  120 MHz SCTL...

  I hope that the attachments give enough clarity to what I'm doing... If we need

  For more information, do not hesitate to ask...

  Kind regards

  S. Raja Kumar

  Greetings!

  I think I understand the problem... The error probably occurs because a DMA FIFO

  (FPGA host) is playing at 40 MHz, and it is checked for the number of items in a loop

  120 MHz... It is not captured by the "pre-processing" by the labview FPGA, but by the Xilinx

  compilation phase synthesis tool.

  A lesson I share, is that if you observe this kind of problem, watch if there is incompatibility

  in the areas of the clock to access a FIFO...

  Kind regards

  S. Raja Kumar

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• Locking with memory dump or sometimes freezes just and need to hard reboot. The 7th

  Hello

  No specific program causes, I can load the system a few days and it blocks when its idle sometimes very sporadic.

  This is error code;

  Unknown bug control: the 7th. Parameters = 0xc0000005, 0x482ec466,.
  0x80e49814, 0x80e493f0.

  Thanks in advance!

  Hello

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -----------------------------------------------------------------------------------------------------------------

  The system has RAID? If so, it is very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-
  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Configuration of memory PowerEdge T410

  Hi all

  Let me start by saying our current configuration of memory (Dell PowerEdge T410):

  We have only one processor installed, so we have 4 DIMM for use A1 - A4. Only 3 are currently installed like:

  A3: 4GB 2Rx8 1333

  A2: 4GB 2Rx8 1333

  A1: 4GB 2Rx8 1333

  A4: white

  in its current wording, our server (running sbs2011) is extremely slow, and we traced it to the use of the RAM. That being said, I went to the store in line of Dell and bought 2 8 GB 4Rx8 1066 RAM sticks to use on the server. I thought I'd take a module of 4 GB, so I then total 24GB (2 GB + 2 8 GB 4).

  Read the manual material, I see that mix 2rx8 and 4rx8 is supported as long as the 4rx8 is in the white slot (first location of the channel). I also see that mixture of capacities of ram is supported as long as each channel has a similar configuration. I assumed that this means that each channel had the same capacity. So I thought 8 GB in every channel:

  A3: 8 GB (channel 2)

  A2: 8 GB (channel 1)

  A1: 4 GB (channel 0)

  A4: 4GB (channel 0)

  I placed the DIMMs in this thought of configuration I have all together until I started the server and I get an error of the incompatibility of DIMM and the BIOS indicates memory configuration not supported. However, starting the server in windows and it says 24GO and is normally. What Miss me? Should I be worried? How can I fix?

  Any input would be greatly appreciated. Thank you very much!

  Hello

  It is not optimal because you mix DIMMS in a bank. The system supports memory triple channel. It does this by spreading a Bank of memory on 3 channels. Here is how the banks are set up:

  DIMM 0 - 1,2,3
  DIMM 1-4

  For an optimal configuration of the DIMMS in slots 1,2,3 must be identical. In older systems that do not support memory flexible configuration the DIMMS in slots 2.3 would be disabled. Since this system supports flexible memory configurations, it will allow the DIMM to stay, but gives no optimal error.

  If you mix memory in this system, you can have 1 Unlike DIMM installed for an optimal configuration. The optimal configuration that uses the maximum memory to the DIMM you have available would be:

  8 GB - 1.2
  4 GB - 4

  The best non-optimal configuration would be:

  8 GB - 1.2
  4 GB - 3.4

  This configuration will always give you errors, but it is better than the current configuration.

  APITech

  I also see that mixture of capacities of ram is supported as long as each channel has a similar configuration.

  This does not mean that you must have identical DIMM modules in the channels. It means that channels must be filled even. Here is an example:

  DIMM 0 slots 1,2,3 =
  DIMM 1 slots 4,5,6 =

  Chanel, 0 = 1.4
  Channel 1 = 2.5
  Channel 2 = 3.6

  You have DIMMs of different rank, speed and capacity mixed through the channels, but you can't have different configurations. For example, in this configuration if you filled DIMM slots 1,2 and then the configuration is valid for DIMM 1 would be filling in only one MEMORY card into the Groove 4 (if the system did not require DIMM be installed in pairs) or 2 DIMMS in slots 4.5. You can't fill a DIMM in the slot 6 since the first slot (3) in the channel (2) is not met.

  The population of channel rule means essentially that you can not complete the second slot in a channel if the first place is not filled. In your housing system 1 and 4 are channel 0. All channels have only a single slot assigned to each memory controller. As long as you have one DIMM in slot 1, you can fill the slot 4.

  Memory population rules can be very confusing. If you have any other questions let me know.

  Thank you

• IRLQ_LESS_OR_NOT_EQUAL_TO 0x000000A then proceeds to run a physical memory dump, I also get something related to memory and then STOP 0x0000001A and 0x00000DE

  Usually when playing games, DOTA 2 and Battlefield 3, I get them more when im playing battlefield 3.

  Hello

  Don't forget to check with the support of game manufacturers and ask in their forums to see if there is
  known problems.

  ---------------------------------------------------------------------------------------

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check have been in 0a, 1A, 7, 50 and.

  When there is that much material different from Bug_Check is almost always involved
  at least some of the issues.
  
  1. remove ALL power and then reinstall memory cards and cables (at both ends, where possible).
  in fact, remove and replace - don't do not just tight. Clean the dust bunnies and ensure that fans
  work. Try adding a small fan blowing into the socket to reduce the effects of heat (heat
  related not always means excessive heat that something might be too sensitive to the same
  normal levels).

  2. test the memory carefully using methods in the troubleshooters below. Keep in mind
  This memory tests only detect all errors as the moment where there are tiny speed differences
  between the modules that appear to be identical. It is necessary to test the modules in
  various combinations and models.

  3 several of the Bug_Check showed CAUSE nvlddmkm.sys who, in the Nvidia video driver.
  Search for Nvidia updates. See the driver update methods in the resolution of the problems previously posted
  above.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  4 check system Maker (manufacturer of motherboard for customized systems) updates to the BIOS,
  chipset drivers low level and major of edge and separate device drivers. Use DriverView
  -Microsoft drivers hide the value VIEW - updated those without emptying in their names. (See pilot
  methods of update in convenience stores previously posted.)

  5. after updating the drivers run DriverVerifier as shown in the troubleshooter below.

  6 use other methods of troubleshooting in convenience stores posted previously and those
  below as needed.

  ===========================================================

  BCCode: 0a 0x0000000A methods as well as updates to driver and memory tests
  are in the resolution of the problems previously shown.

  ===========================================================
  
  BCCode: 1a 0x0000001a

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Make sure that the vents are clear and that the
  the fans are working. Even if the temperature is OK assume no heat does not affect the video,.
  sound or other system functions that it these get hot. Try adding a small fan blowing in
  the vents as a test. (These are especially for a PC not a laptop.)

  Have you recently added any hardware? Have you updated any drivers just before this started?
  (Check control panel - updates of Windows to see if all drivers have been updated it on the)
  This started the time) likely guilty hand are video driver, other great drivers, memory, and
  antivirus/antispyware/security products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when
  you get these sections and then back to the resolution of the problems according to the needs.

  BCCode: 1a 0x0000001a<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/memory-management-0x0000001A-* 1041.html? order = votes

  ===============================================================

  BCCode: 7F 0x00000007E who is also a 0x1000007E

  See these KB articles:

  "Stop 0x0000007E" or "Stop 0 x 00000050" error message in Windows 7 or Windows Server
  2008 R2
  http://support.Microsoft.com/kb/979538

  "Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED" error when the GPU is under
  conditions of heavy load in Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/983615

  References to Vista also apply to Windows 7.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ===============================================================

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when you get to
  These sections and then back to the resolution of the problems according to the needs.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of faulty hardware, or in case of failure
  hardware installed (usually associated with a faulty RAM, be it the main memory, L2 RAM cache memory, or)
  Video RAM).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently,
  Remove to see if the error recurs. If existing hardware has failed, remove or replace
  the defective component. You must run the diagnostics of material provided by the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  Fix a defective system service: Disable the service and confirm that this
  resolves the error. If so, contact the manufacturer of the service on a possible system
  Update. If the error occurs during the system startup, restart your computer, and press F8 to
  character mode menu that displays the choice of operating system. As a result
  Windows Advanced Options, select last good known Configuration option menu.
  This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this fixes
  the error. If this is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume:  Run Chkdsk /f /r to detect and repair disk
  errors. You must reboot the system before the start of the analysis of disk on a system partition. If
  the hard drive is SCSI, check for problems between the SCSI controller and the disk.

  Finally, check the system log in Event Viewer for additional error messages that might help
  identify the device or driver that generated the error. Disable the cache in memory of the BIOS
  could also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  ===============================================================

  BCCode: OF 0x000000DE

  This is usually a driver issue then run DriverVerifier and check the drivers using the methods
  in troubleshooting below. Carefully check the memory using the methods below.

  BCCode: OF 0x000000DE

  Bug Check 0xDE: POOL_CORRUPTION_IN_FILE_AREA

  Bug POOL_CORRUPTION_IN_FILE_AREA control has a value of 0x000000DE. This indicates that a driver has corrupted the memory pool that is used to maintain pages to disk.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  POOL_CORRUPTION_IN_FILE_AREA settings

  None

  Cause

  When the memory dereferenced Manager the file, he discovered this type of corruption of memory pool.

  BCCode: OF 0x000000DE<-- read="" this="">
  * 1221.html http://www.faultwire.com/solutions-fatal_error/A-Driver-corrupted-pool-Memory-used-for-Holding-pages-0x000000DE-

  ===================================================

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot complete the Windows easy transfer after upgrading Windows XP to Windows 7. Message says that I don't have enough memory.

  Upgrade from Windows XP to W7 nothing but problems.

  I recently bought and installed windows 7 Home Edition premium, because microsoft does not support the windows xp more. Now all of my terrible looking graphics and I am unable to do my 'easy transfer' of my settings in my computer. It is said that there is not enough memory. Why would the transfer to proceed with the transfer if there is not enough room to put them on the same computer with the new windows operating system 7? Besides, why don't the Windows Upgrade Advisor warn me that my system would not support it. There was some software incompatibility issues but nothing that serious.  I would like to go back to windows xp or windows 7 starter edition would work? I have a 2 GB of ram with a 32-bit op system. I fell I just lost my money and even less hours spent working on it. I realize it's time to upgrade, but want even this computer works for children and the wife.

  Advise Windows isn't the end of everything, being together.  Common sense and human interaction and research is always the majority of computing in my humble opinion.  If a program can still tell you the answer - and in fact always reason - is it a good thing?  ;-)

  From my experience, we should always do their own research - investigating on their own.  Ask others who have more experience in everything that they might plan to do a few questions so they could avoid an error.  Yet, at this stage, human beings are still the best source for experience.

  Windows XP should work fine for that machine.  In fact - it was designed essentially around it (the machine has been designed around Windows XP--came with it). I'm sorry you had a bad experience with Windows 7 and in trouble, but I assure you - with the right material, that Windows 7 is the next Windows XP. :-)

• Error: "no physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I have a stable system that works with a processor E6300, card mother evga 680i, graphics card 8800gts and 8gbs of RAM running on ulitmate windows 7 (32 bits - I decided to re - install with 64-bit to use the extra 4 GB of RAM, after I deal with the question below).

  I recently tried to add an adapter of Intel RS2WC080 SAS/SATA controller in a PCI express slots on the card mother 680i. I know that the card works (such as "it works very well in another motherboard), but for some reason when I put it in the 680i mobo I get the following message appears when I try to start windows. (i.e. the raid controller has no windows on the disks. I always use original hard drive always connected on the same Sata port on the motherboard)

  "No physical memory is available to the location required for the windows boot manager." The system cannot continue. "

  I tried to turn off virtually everything I could in the bios of the motherboard as an experience (including the things I needed). I also disabled the Intel RS2WC080 card bios.

  I'm puzzled. So what I want to know is simply a hardware compatibility problem, or is there some kind of workaround I can run in windows 7. For example, is there maybe some sort of way for her to start using a different memory location than its currently using? (Or is it something error message related to the memory of the bios that can only be overcome with software?)

  Thanks for any help.

  I tried to disable everything in the bios... including the things I needed. No luck

  Thank you very much for the reply Chris but I don't have abandoned bascially. Right now I guess the card and the 680i have some kind of incompatibility and I will just get a different mobo.