Incompatibility with the transformation of multi - subject

Similar Questions

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• PCIe ASPM is disabled "by reason of incompatibility with the hardware on this computer"

  My desktop computer running Windows 7 Professional x 64. As far as I can tell, my computer has no trouble mode sleep (S3) and no trouble waking from sleep mode. My power settings work very well, as far as I know.

  Nevertheless, my Windows 7 'Power report' shows the following "error":

  PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.

  In my view, that it is PCIe link state power management.

  Considering that this computer is almost new, with no changes made to the original material, and that Dell is not likely to include material "known incompatibility" in its systems, can I just ignore this "error?

  If there is someone at Microsoft who really knows what the "known incompatibility", they aren't saying.

  After the search the Web site of Microsoft and the Web for an answer and finding none, I came to the conclusion that it is one of these incomprehensible Windows messages that Microsoft is trying to ignore ("...") consult your manufacturer for assistance... ") and nobody else can understand.

  Fortunately for me, my computer goes in and wakes from hybrid sleep without a problem, despite the "known incompatibility" that nobody at Microsoft.

• Problem with the generation of multi-sinus wavefrom of random phase using PXI-5412

  Hello

  I am trying to generate random phase multi-sine waveform using the PXI-5412 14 bits 100 M/s AWG on LabVIEW8.0.

  The version of LabVIEW8.0 for the PXI-5412 comes with a sample VI on multi-tone waveform generation. When I tried with a different combination of frequency and amplitude, there is no problem with the sample VI.

  Because I need the phase to be random for each frequency component, I had tore the tone cluster containing 3 elements, i.e. frequency, amplitude and phase, which feeds the generator of signals, and rebundle the cluster with elements of reading a CSV file by using a loop, a fixed value amplititude and a number of random phase of the frequency generated by a random number (formula lournies elements (: pi - 2pi x r). When the waveform multi-sinusoidale generated on the PXI-5112 100 MHz Digital Oscilloscope, it was pointed out that the waveform would change with the tested frequency range.  However, the amplitude of the wave is always ~1.4V (guess that's always default to 1 V x sqrt (2)).  There is no question also when testing the same combination of frequency and amplitude by using sample VI without modification.

  Please find attached the VI of the sample, snatching up to the version and the CSV file I used. Is there something wrong with the table 1 d of the cluster of 3 elements that I built and assembled causing the signal generator to ignore the value of input amplitude and, possibly, the input value of the same phase (as it seems that the amplititude is always set to the default)?

  The other question that I found on the two sample VI and ripped version is on the news of sampling.  The waveforms appear on digital Oscilloscope PXI-5112 always default to 10 cycles no matter how changed the sampling frequency and the number of samples.  For example, if the frequency is 10 Hz, sampling frequency is 1000 Hz, and I put the number of samples to 10000.  I'm supposed to get 10000/100 = 100 cycles.  However, I could see 10 cycles no matter how, I changed.  What should be the correct way to change the number of cycles?

  Really appreiciate your help and advice. Thank you.

  1 phase unit is in degrees (-180 to 180), no - pi pi.
  2 standardize Waveform.vi always normalize your amplitude of the signal. You can remove it to use your desired amplitue, but must make sure that it is not above 5412 spec.

• Vector glitch of anchor points with the transformation of the cs6 illustrator objects

  Vector anchor points glitch during the transformation of objects,

  It is if I create a square and turn it, let's say I have it increase by 200%, it creates additional anchor points in the square corners and also creates weird crenellated edges, when I hover over the square with the slider to show the edges, the line from the edge which shows blue is shifted in at the edge of the actual object reference (see attached img the orange object displays the quirky plan and the black object is supposed to be a) round square edged, but after that I turned (Shear 10 degrees) it apeared of curves in stairs)

  I already tried to launch updates and restart, but the issue continues to display.

  Thanks in advance for your help.

  Rob.

  

  Looks like it's related to 'snap to grid of pixels.

• incompatibility with the update of Windows 10

  Hello, since the update of Windows 10 2 weeks ago, I can't save documents. I have consulted the computer technician who sold me my phone in the shop, he saw a problem that does not exist with Adobe Acrobat Reader DC, he relocated all but the problem persists. He suggested me to contact you so that you can fix the problem.

  Thank you

  Hi caroleg17814046,

  I also use Windows 10 with the latest Acrobat Reader DC and I can save the PDF files. Please try the steps below:

  Open the CD player, go to the Edit menu > Preferences > general and uncheck 'Show when saving files from online storage '.

  Click OK to save the settings and restart the application.

  Let us know if this solves your problem.

  Kind regards
  Nicos

• Firefox 12 says its incompatibility with the Norton toolbar. All solutions?

  Is anyone aware of a fix to restore my Norton toolbar on Firefox 12?

  In fact, the message says the Norton toolbar version you have is not compatible with Firefox 12.0.

  http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-12-support-for-Norton-toolbar/TD-p/704071

  http://community.Norton.com/T5/Norton-360/Firefox-12-support-for-Norton-toolbar/TD-p/704079

• WMP will not play dvd - r with the video on this subject:

  Audio WMP plays well. But no video. My panasonic dvd player (about 4 years) there will be no more. A friend told me to go on a free website, www.filehippo. to download a "fix." Don't know what I ' d be downloaded, because I am NOT tech savvy. " I have download all 'old' versions as my friend says. I tried windows again, not good. Used the two bays of dvd in my lap.     I am at a loss, my ignorance, but I could sure use some SIMPLE instructions as to why and how to fix it.

  I tried the Windows Fixit tool, but no help.  ALSO, I frequently get a box of Windows ERROR when you try to load files from the web or e-mails down. It usually says: windows cannot open this file: unrecognized program. "Then it tells me to click for the solution, but don't know which software to use and I stop trying, cause the error message arrives for this too. sigh.

  I know it's probably a 'newbie' question, but your help would be appreciated. I think this question will come and the problem with windows is not not able to download is fairly common as well. Thanks for any help.   Sincerely, debbie in Florida.

  Hi, I think I've gotten help to solve my problem with playback of DVDs with different codes that WMP will accept. I downloaded a NEW multimedia player of BS to WWW.filehippo.com/download bsplayer/8842/who worked for the media BS player. I got help with THAT download to get, I got the SECOND version listed on the left column. Now works on computer, next step is to get the "firmware" for Panasonic download on my dvd player, and it will play as well. Thanks for the help, I finally learned enough searched all day Sunday (ugh) and then my friend helped me on the phone. Thank you all and hope that it helps you, too.     CODECS, which kne w?

• Laptop Pavilion: help - Qualcomm adapter WIFI Atheros and incompatibility with the modem

  I bought a new laptop and can't seem to connect to WIFI at home and have dealt with many parts to get resolved nothing doesn't. Here is some key information:

  (a) laptop can connect via Ethernet to the modem Vodafone (the model is HG556a)

  (b) laptop can connect outside the House on another WIFI network

  (c) other PC and the device at home working on WIFI

  (d) the WIFI network adapter is Qualcomm Atherros QCA9565 802.1b/g/n

  The laptop detects the network, and I am asked to enter the key and it trys and advise network not available at this time.

  I looked to see if the adapter works fine in Device Manager (and assumed all good). There is no upgrade is recommended

  With advice from HP support I was through many loops, tests, and trials, restart modems, etc., included in the present was check it on the site of HP on the recommended drivers/updates, and downloaded a new driver

  Qualcomm-Atheros QCA9000 adapter, however it is not visible in the device only Manager downloads, not sure how truly "replace" the driver to see if I have better luck.

  Thankful the help of this forum

  The problem is resolved. Got back to my broadband provider and they change the setting of the channel from 11 to 1, and this has solved the problem.

• Cannot open the Adobe reader protected mode due to incompatibility with your system configuration.

  Original title: trying to open a PDF file problems

  I use Windows 7 on a 32-bit computer with Firefox and Adobe Reader X 1.  Try to open a PDF with any application or attempt to open Adobe Reader via the icon programs, product now the following error message:

  «Adobe reader could not open protected mode due to incompatibility with the system configuration you.» Want to open Acrobat Reader with protected Mode off? "Answer either 'Yes' to this question produces:"Adobe could not load the DLL base. "

  On other occasions, trying to open the pdf file has directed me to an interface recommending me to open it with my Canon printer.  Try to change the default program used on a PDF file generates the above error messages previously.

  I reinstalled Adobe and who did it.  Clearly a problem for Adobe.  Regret not having tried that earlier, I thought that it couldn't be that simple.

• Transform problems of effect when used with the depth of the 3D layer

  Here is my set upwards.

  I have PreComp with graphics any illustrator with active continuously rasterized layer.

  This graph has a reflection in it. I was thinking by applying the effect processing, offset setting to-100 and by setting the anchor point.

  Regarding the graphics move from left to right (X, Y) there is no problem and anchor point is in its place.

  As soon as I do the 3D layer and start changing the values of depth thinking begins to jump around.

  My guess is - it happens that point because of anchorage is a constant value and because the thinking is based on its value it does not follow the base of the graphics. Purhasps it is a snippet of code to be used to bind the value of the anchor Point to the Zoom value? Adjustment of the values of anchor with keyframes turned out to be too difficult.

  In other words, I like to keep thinking at a constant distance from the base of the graphic part and once the relocation of graphics on or in the reflection does not follow.

  I précomposé this graphics and it imported into the new Compostion and applied movement XY and Z using the camera and Null layers. It was the same effect and reflection did not stick to the base of the graphic.

  I need to keep the collapse processing enabled on all consecutive Comps/PreComps to ensure that the vector art makes to high quality.

  What would be a good way to make a reflection of a 3D/preComp layer in the model where the movement controlled with layers of continuously active camera and Null, with the Transformations of rasterized/reduce?

  I'm with Mylenium on it. Your concept is inappropriate and you do it is much too difficult. Just put the anchor at the bottom of your reflection, then resize it to 100 in y [100, -100] can do the two 3D layers and implemented a matte degraded on the reflection layer.

• Strange problem with the KING and IMAQ find right 3 edges

  So first of all, I noticed that the KING produced by KING features seems to have an incompatibility with the entrance to find right IMAQ 3 edges:

  

  In my code, I have the strange problem "IMAQ find right edges 3" is the production of edges that lie outside the limits by the wired KING specifided: "."

  

  In this case, a return on investment, defined by a rectangle, I [476, 1559, 752, 1779], but the best line produced by VI shape is outside this rectangle (see ordered 1876).

  How is that possible?

  I finally thought to it - it was my fault. I was updating the global rectangle in the KING entered correctly, but not the contours.

  I fixed the wiring and now it works fine.

  Detective Conan!

  G

• Interference with the drag & drop on MC ListBox

  LV 2010, Win 7

  I have a Drag and Drop interface, where the user drags elements from one part of the window on a multicolumn ListBox, in order to build a result of type worksheet.

  The format they're building is known and that they can apply to multiple data files in the future.

  They can also drag rows around to rearrange their and columns around too, once they are placed.

  It's everything works fine, EXCEPT:

  If the text in a given cell listbox is longer than the width of the cell, the text is partially hidden.  It is very good.

  If you move the mouse over the cell, something like a 'tip-band' opens and displays the full text.  It is very good.

  BUT

  This band of advanced interfere with dragging something.  When you click, you click on the BAND, not the list box.

  As a result, the DEPARTURE of DRAG? event never gets called and then you can not drag.

  You can see in this JING :

  I drag a few items on the OK sheet.

  I can drag down TIME line and put it somewhere else.

  But I can't drag the item with the band on this subject.

  Notice that I CAN drag this line, by entering the number which has no band that covers. (My code allows you to drag a line by clicking anywhere on the line, except for the symbol).

  If you try hard you can move the mouse on a cell, click on before the band gets up and do it very well.

  Thus, the code works fine.

  I checked do DRAG from? is not called, if there is a band under the mouse.

  What can I do about it?  I have not found a way to disable this band. Indeed, it is useful.

  But I don't think that is a command I can get events from.

  So I have no way of knowing if she is released or not.

  
  

• Need help with the button mute on my helmet XL-3000 of Microsoft Chat, please!

  Hi all!  Hope everyone is having a good TGIF!  If you use my helmet even, I need help understanding the region button mute in the middle of the rope.  The red light is on or off?  I suppose that if I hit the curve button with the microphone on this subject, and the red light, I'm turn off my mike?

  I did some tests with others on the phone calls.  Sometimes, some other hear me, sometimes they do not have.  BUT I NEVER HEAR THEM!  FOR MY WORK, IT IS IMPERATIVE THAT I MAKE CALLS TO OTHERS!  HELP PLZ!  Thank you very much and have a great wkend!

  Hello
   
  Please follow the links below to troubleshoot the computer.
   
  Method 1
   
  Connect one microphone, music player or other audio device to your computer
  
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer
  
  Method 2
  
  Step 1
  
  Troubleshooting: headsets
  
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/headset/microphone-issues
  
  Step 2
  
  Open the troubleshooting of Audio recording
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
  
  Method 3
  
  How to adjust the microphone volume
  
  a. click Start, type mmsys.cpl in the search box and press ENTER.
  b. in the sound dialog box, click the recording tab.
  c. click Microphone, and then click Properties.
  Note Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
  d. the Microphone Properties dialog box, click the custom tab.
  e. select or clear the box amp Microphone.
  f. click the levels tab.
  g. set the volume to the desired level, and then click OK.
  h. click OK to close the sound dialog box.
   
  How to adjust the setting of the voice
   
  a. start the game.
  b. connect to LIVE (the Guide).
  c. click personal settings.
  d. click on voice.
  e. make sure that the recording volume level indicator records at a bar when you talk.
  f. click done.

  If you are still facing problems then, I would say that you contact support for Microsoft hardware for more direct intervention.

  http://www.Microsoft.com/hardware/en-us/support

  
  I hope this helps.
  
   

• Svchost.exe cannot be started due to incompatibility with 64-bit windows

  I am getting... The program or feature "\?". \c:\users\John\AppData\Roaming\Microsoft\svchost.exe"cannot start or run due to incompatibility with the 64 bit version of Windows... Someone knows how to fix... I have the Security Tool virus a few days if it matters.

  I am getting... The program or feature "\?". \c:\users\John\AppData\Roaming\Microsoft\svchost.exe"cannot start or run due to incompatibility with the 64 bit version of Windows...

  It's a malware. The original Windows system file is stored here:

  C:\Windows\system32\svchost.exe

  Perform a complete equipped with scanning AntiVirus as well as Microsoft Security Essentials scan your PC with Malwarebytes' Anti-Malware.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/