Incompatible drive with the system configuration

Similar Questions

• Pavilion dv6-2162nr laptop: install the new hard drive with the system image

  I have a hp laptop dv6-2162nr win 7 I am about to install a new hdd Seagate, I have the repair disk and recovery disks that I made at the outset after purchase. I also updated backup files and file system image. I want to recover my file system registered... at what time; using the recovery discs, the new Seagate hdd will be ready to get a picture of systems?

  BobO2

  Recovery disks do not use the Image you did install Windows and all software/drivers hard disk from the factory original.

  You would start with repair cd to restore the Image.

  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup/

• Cannot open the Adobe reader protected mode due to incompatibility with your system configuration.

  Original title: trying to open a PDF file problems

  I use Windows 7 on a 32-bit computer with Firefox and Adobe Reader X 1.  Try to open a PDF with any application or attempt to open Adobe Reader via the icon programs, product now the following error message:

  «Adobe reader could not open protected mode due to incompatibility with the system configuration you.» Want to open Acrobat Reader with protected Mode off? "Answer either 'Yes' to this question produces:"Adobe could not load the DLL base. "

  On other occasions, trying to open the pdf file has directed me to an interface recommending me to open it with my Canon printer.  Try to change the default program used on a PDF file generates the above error messages previously.

  I reinstalled Adobe and who did it.  Clearly a problem for Adobe.  Regret not having tried that earlier, I thought that it couldn't be that simple.

• Problem with the latest Adobe Reader 11.0.10 - Adobe Reader cannot open protected mode due to the incompatibility with your system configuration.

  Since the update to the most recent v11.0.10 of Adobe Reader, getting a Safe_mode Adobe Reader: Adobe Reader cannot open protected mode due make an incompatibility with your system configuration.  Want to open Adobe Reader with protected Mode off?

  The solution I was looking for was to launch Adobe Reader protected mode.

  I couldn't identify issues preventing start Protected Mode.  What ended up working, was complete, followed by a reinstall uninstall.  Now we can load drive in Protected Mode.

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• THE SYSTEM CONFIGURATION SHOWING NOT

  I bought the office base model Inspiron 660 s with DOS operating system dealer. IAM entering service no tag. to check the configuration of the system but the following message is displayed.

  On clicking: view the original Configuration:

  Message: There is no information associated with this system configuration.

  PL guide how to check the authenticity of the product.

  The hard drive and bios disappeared already own by the dealer that you purchased. Dell sells no pc with BACKBONE. I suggest that you go back to the dealer and ask for help.

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Mac Air 1.3 Ghz i5, 4 GB ram end of 2013 everyone upgraded to El Capitan with the same configuration?

  worried about the going 10.10.5 Yosemite to El Capitan. Especially with only 4 GB of ram. Have 256 GB SSD HARD drive

  would appreciate an answer from people already have the upgrade.problems with the same configuration? slower?

  FWIW, the El Capitan applications are no different from Yosemite. In fact, it is easier on resources in some areas. The main thing you need to worry is to make sure the software and equipment to use is compatible. Make sure you have a good backup in case you change your mind and want to downgrade.

• upgrade a SATA drive with the largest disk ata

  I have an old Presario S5000NX with a second ATA hard disk of 500 GB. Can I replace this 500 GB drive with a new Seagate Barracuda 750 GB Ultra ATA/100 drive with no problem with the BIOS or motherboard?

  According to our database, this unit came with 40 GB HARD drive and the system's cable support all hard drives ATA-66/100.

  There is an update of the BIOS available for the motherboard 3.17 if it is not updated:

  http://ftp.HP.com/pub/softlib/software2/COL5057/PV-17526-1/sp24024.exe

• How to remove McAfee security scran more my boot of the System Configuration.

  Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.

  Gary

  Hello

  1. are you able to uninstall successful McAfee software?
  2. is there an error message or error code while you uninstall McAfee software?

  Try the following and see if it helps.

  Method 1:

  How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783

  See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp

  Method 2:

  Uninstall if you have any program name McAfee Security Scan Plus on your computer.
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  See also:

  Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 3:

  The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.

  If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:

  Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce

  Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce

  If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder

  HKEY_LOCAL_MACHINE startupreg

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman

• The system configuration does not

  I am running windows 7 and decided to try and resolve messages running and (does not) slow programs. I started to perform a clean boot, but when I had made the changes to the configuration window and clicked on OK the said title bar system (not responding) after waiting a considerable amount of time, I have not quit. When I return to the system configuration window, nothing has changed, but now my PC guard just hung in the system configuration window. The computer is now worse than when I started. I had not done something before.

  The first thing I recommend is to restore and filled to half of the changes that have been made with the System Restore utility. First to save open documents and close all programs and then click Start (or press the Windows key) and type s·ymakeUPS·e·Mr r·emakeUPS·o·r·e then select System Restore programs from the list above. When the system restore starts, click Next and choose the most recent restore point that precedes your attempt to create a boot environment. Follow the rest of the procedure described in this article.

  Restore system files and settings

  Once you have recovered your computer to its state before the attempt to establish a clean boot environment, start with an analysis of malware using a free scan like MalwareBytesanti-malware utility.

  It comes as part of the standard offers free and paid-for versions. For standalone scans and malware removal (but not real time analysis), the free version is usually more than enough.

  MalwareBytes.org

• Change the system configuration and yet no difference in config

  This question is about a router CISCO1941/K9, Version 15.0 (1r) M15.

  When I type

  reload in 4

  He asks me

  The system configuration has changed. Save? [Yes/No]:
  % Please answer 'yes' or «»

  even if

  See the config differences: running system of archives-config nvram:startup

  gives

  ! Contextual Diffs Config:
  ! No changes have been found

  and

  Show running

  gives

  Current configuration: 5031 bytes
  !
  ! No change since the last restart configuration

  My question is: How can I determine WHAT system configuration has been altered?

  As far as I know, the only thing changed is the Terminal length that I occasionally switches for use with the recording of session with PuTTY, which is

  Terminal length 0.

  This router has been in production for months and I don't want to break anything (obviously).  I need to make a change to the configuration of the access-list and wanted to protect me by saying to reload in 4, and then I was probably cancel about 1 minute.  But now I'm worried about it save yes/no question.

  Thank you.

  Hello

  Just save config running and configuration of boot in text files and compare them. Have you enabled all logging on the router?  It may be because of this.

  Just make sure that your configuration register is 0 x 2102. You can see by the show version command

• Can the Win8 recovery drive and the System Image be stored on the same device?

  I intend to create a windows 8 recovery on my USB HDD drive.  Then, I want to create a System Image using the file Win7 recovery tool, but put on the same HARD drive, so that I don't have 2 devices.  Normally, I believe the recovery drive utility fits on a 256 MB USB key, but why not co-exist with the system image files?

  Hello

  Yes, you are right. To store an image of the system, the disc must be in NTFS format. Please refer to the information on the following link; If it's for Windows 7, the information is true for Windows 8 as well.

  Back up your programs, files and system settings

  Hope this information is useful.