THE SYSTEM CONFIGURATION SHOWING NOT
I bought the office base model Inspiron 660 s with DOS operating system dealer. IAM entering service no tag. to check the configuration of the system but the following message is displayed.
On clicking: view the original Configuration:
Message: There is no information associated with this system configuration.
PL guide how to check the authenticity of the product.
The hard drive and bios disappeared already own by the dealer that you purchased. Dell sells no pc with BACKBONE. I suggest that you go back to the dealer and ask for help.
Tags: Dell Products
Similar Questions
-
The system configuration does not
I am running windows 7 and decided to try and resolve messages running and (does not) slow programs. I started to perform a clean boot, but when I had made the changes to the configuration window and clicked on OK the said title bar system (not responding) after waiting a considerable amount of time, I have not quit. When I return to the system configuration window, nothing has changed, but now my PC guard just hung in the system configuration window. The computer is now worse than when I started. I had not done something before.
The first thing I recommend is to restore and filled to half of the changes that have been made with the System Restore utility. First to save open documents and close all programs and then click Start (or press the Windows key) and type s·ymakeUPS·e·Mr r·emakeUPS·o·r·e then select System Restore programs from the list above. When the system restore starts, click Next and choose the most recent restore point that precedes your attempt to create a boot environment. Follow the rest of the procedure described in this article.
Restore system files and settings
Once you have recovered your computer to its state before the attempt to establish a clean boot environment, start with an analysis of malware using a free scan like MalwareBytesanti-malware utility.
It comes as part of the standard offers free and paid-for versions. For standalone scans and malware removal (but not real time analysis), the free version is usually more than enough.
-
During the installation of Acrobat 11, interruption occurred and the system configuration was not completed.
Now the program does not start. Removal of the program is not allowed on top of the reason. Re-Setup is not allowed for the reason that the system has already produced installed.
I'm right with her. Can someone give me an idea how to remove or re - install?
Street
Hi rues80079274,
Reboot your system, uninstall Acrobat XI using this link Download Adobe Reader and Acrobat tool - Adobe Labs, stop, repeat & reinstall Acrobat XI using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.
Let me know how it goes.
Kind regards
Nicos
-
I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please
Hi Alan,
Thanks for posting your query in Microsoft Community.
I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;
- How do you run the Startup Repair?
- Do you have Windows 7 repair disc?
- Remember to no particular change in the computer before the show?
- Have you plugged an external equipment, except the keyboard and mouse?
- You are able to start the computer in safe mode?
- What is the brand and model of the computer?
Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.
If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.
If you haven't tried using Windows 7 repair disc, you can try the following:
1. Insert the Windows 7 disc
2. restart your computer
3. When asked if you want to boot from your DVD player, do it.
4. Select your language, click Next.
5. click on repair your computer
6. Select the operating system you want to repair.You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.
Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.
I also recommend to contact the computer manufacturer to get the done diagnostic equipment.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.
I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.
Hello
option is to have access to the local switch and run "show cdp neighbors detail."
or
Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.
regds,
Aman
-
Windows Vista; The System Configuration dialog box; dialog resize.
You can not, this is a dialog box and is not scheduled to be resizable.--..--"hyperluckylink" wrote in messageNews: 054b 0592 - 5a9a - 4 c 69-af57-39f8d626f1be...> Windows Vista; The System Configuration dialog box; dialog resize. -
Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.
I use vmware vcenter spec customization here,
I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.
Also change to vmxnet3 NIC and install vmware tools and try cloning.
"
) More than 8 k
(b) set incorrect permissions
(c) corrupted somehow
For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was. Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out. Here are the steps to get the newspaper, you must see:
When you see the error message, follow these steps:
1.) press SHIFT + F10 to get to a command prompt
2.) stand C:\windows\Panther
3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)
4.) copy the file to another computer that has Windows 7 setup.etl corrupt system. Place it at the root of C:\ for easier access.
5.) open a prompt on the Windows 7 computer.
6.) navigate to the root of C:\ (or anywhere where you saved the file)
7.) type "tracerpt setup.etl o logfile.csv.
8.) close command prompt and open logfile.csv in your text editor of choice.
9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.
10.) remove this software from your image, or how to get the registry key that does not work properly.
After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.
"
-
the system configuration not saved during the last stop on the service console error
Hello
I m getting this msg of error on the service console
the system configuration not saved during the last stop on the service console error
but when I tried to run some commands s troubleshoot mode according to the vmware esxcfg-boot - b, esxcfg-boot - p I got an error message like
bad interprator usr permission denied
I guess you follow this KB: http://kb.vmware.com/kb/1002503
But seems like you have file system errors.
Try to restart your system in init 1
Then use fsck command to check your ext3 file system (remember that the file systems are not in use and use the - f option).
André
-
How to remove McAfee security scran more my boot of the System Configuration.
Hi, my laptop is a Windows vista 32-bit, I have a problem to remove McAfee Security scran more my boot of the System Configuration. In fact, I had used the removal tool to remove the antivirus McAfee sofeware eralier. But when I opened my startup Configuration recently, I noticed that the McAfee security plu scran is still there, I have turn off, but couldn't delete it. Help, please. Thank you.
Gary
Hello
1. are you able to uninstall successful McAfee software?
2. is there an error message or error code while you uninstall McAfee software?Try the following and see if it helps.
Method 1:
How to uninstall McAfee Security Scan Plus? : http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS100783
See also: http://promos.mcafee.com/LegacyLp/en-us/affiliates/adobe/landingpages/np681.asp
Method 2:
Uninstall if you have any program name McAfee Security Scan Plus on your computer.
Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-programSee also:
Solve problems with programs that cannot be installed or uninstalled:http://support.microsoft.com/mats/Program_Install_and_Uninstall
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
Method 3:
The System Configuration utility displays the items that start with your computer. These items are usually in one of two areas. The registry or during startup.
If you decide to prevent specific items from start until you can uncheck the in the System Configuration utility. Although this method is very good, it is ultimately preferable to delete them from the source. To access the common locations in the registry of these elements take a look in the following areas:
Note : open the registry editor by clicking the Start button, type regedit into the search box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce
Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce
If you have disabled items in the System Configuration utility and want to remove the registry also they lies in one of the following locations:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SharedTools\MSConfig\startupfolder
HKEY_LOCAL_MACHINE startupreg
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
-
Change the system configuration and yet no difference in config
This question is about a router CISCO1941/K9, Version 15.0 (1r) M15.
When I type
reload in 4
He asks me
The system configuration has changed. Save? [Yes/No]:
% Please answer 'yes' or «»even if
See the config differences: running system of archives-config nvram:startup
gives
! Contextual Diffs Config:
! No changes have been foundand
Show running
gives
Current configuration: 5031 bytes
!
! No change since the last restart configurationMy question is: How can I determine WHAT system configuration has been altered?
As far as I know, the only thing changed is the Terminal length that I occasionally switches for use with the recording of session with PuTTY, which is
Terminal length 0.
This router has been in production for months and I don't want to break anything (obviously). I need to make a change to the configuration of the access-list and wanted to protect me by saying to reload in 4, and then I was probably cancel about 1 minute. But now I'm worried about it save yes/no question.
Thank you.
Hello
Just save config running and configuration of boot in text files and compare them. Have you enabled all logging on the router? It may be because of this.
Just make sure that your configuration register is 0 x 2102. You can see by the show version command
-
KMS server stops working after 1 month? Have activated the clients now show not activated.
Hi QuinnQ,
The question you have posted is related to Windows Server and would be better suited to the TechNet community like TechNet is more oriented to professional support. I have included a link below for the TechNet Windows Server community who will support ask you...
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
-
How can I open the system configuration
I am running windows xp (version 2002). How to find the system configuration?
There is no 'system configuration' in the Panel (at least on my system).
There is a System option which open to the System Properties screen.
If mean you the System Configuration utility, click Start, run, and in the type box:
Msconfig
Click OK to open the System Configuration utility.
If you want to see on your current XP configuration information, click Start, run, and in the type box:
Msinfo32
Click OK to open the System Information applet.
It's the same thing you see if you click on start, programs, accessories, System Tools, system information.
-
Original title:. Nothing works.
All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.
Safe mode?
Looks like you have a virus/trojan/worm infection pretty good...
Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility. Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.
-
Network icon does not display connected
The network icon shows not connected, but in reality I'm connected and can browse internet.
Could grateful if someone let me know what could be the reason.
Thanks in advance
Hello world
I had the same problem and I solved it by unplugging my pc to the modem, wait about 30 seconds and reconnected. This means that if you do the same thing with your network adapter problem could be solved. Try this option, you will not lose anything
-
Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work." How can this be repaired?
Hi rebick,.
Try the troubleshooting steps presented by spirit X in this thread.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Hello. When you click on a link in Safari, I got a screen that says: "ATTENTION Verizon Online Lic user: your Apple macintosh has been blocked." Apple Macintosh system alert! System was infected due to an unexpected error. "Immediately, certified tec
-
HP ENVY Phoenix 800-019eb (ENERGY STAR) desktop PC (E3H43EA)
Hello In this PC is a NVIDIA GeForce GTX 680 with integrated graphics Intel HD Graphics 4600 (GT2). I wonder if it is possible to extend this PC with exactly the same graphics card with this integrated graphics card.
-
top of page desktop icons seem to be frozen and will not open
my sidebar and icons do not work
-
Can receive emails but not send
Can receive emails, but cannot send. No message indicating a problem appears on the screen
-
BlackBerry Z10 1. Passage of 9900 to Q10 and 2. Installation of original ringtones
Hello This is my first post, so please bear with me! I've had in my 9900 to a Q10. Giving my partner my old 9900. Save both devices two weeks ago, when I changed my phone so our data is secure. My data has been moved over my Q10 (screw connection).