Incomplete installation program - back to Windows Vista

Similar Questions

• I can't find my menu to change sounds like stop, critical judgment, and so on, how do I get it back? Windows Vista.

  critical stop as stop, and so on, how do I get it back? Windows Vista.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  Method 1: try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Also try to scan your computer for the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For your reference: Change the sounds of the computer: http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds

  Hope this information is useful.

• the system administrator has set policies to prevent installation of iTunes on windows Vista

  The system administrator has set policies to prevent installation of iTunes under Windows Vista.

  The system administrator has set policies to prevent installation of iTunes under Windows Vista.

  These instructions troiubleshooting by Apple may be of some help to your problem:
   
  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/HT1926

• I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005

  original title: error message

  I am unable to back up windows Vista on an external drive that I am cant get full backup - error 0 x 80070005. How to overcome this please? Thanks for your help. Kay Alexander

  Hello

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  "This forum supports questions for the default backup utility in Windows Vista, Server 2008 and beyond."

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Failed installation error Code 80070490 Windows Vista update KB976098. How to install this update or keep the windows to try to re - install?

  Failed installation error Code 80070490 Windows Vista update KB976098.  How to install this update or keep the windows to try to re - install?

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I try to print to a port usb of a program back in windows 7 32 bit profitional

  I try to print to a port usb of a program back in windows 7 32 bit profitional

  Hey

  Try the procedure described on the site provided
  http://geekswithblogs.NET/dtotzke/articles/26204.aspx

  See you soon!

• Problem of Mode full screen with Base of BACK in Windows Vista program

  I have a program from base of BACK, but I can't go full-screen with my BACK Basic program. In order to solve my problem quickly.

  Here is a link to a similar problem with a number of proposed solutions: http://www.askageek.com/2007/12/20/how-to-run-an-old-dos-program-in-full-screen-using-windows-vista/.

  Here is another article to resolve the problem (and note the links to other sites that may also help) from Microsoft:http://support.microsoft.com/default.aspx?scid=kb; EN-US; 926657. I'm not sure I like the idea of using the XP drivers on the Vista system (it seems unfair), but the article comes from Microsoft if...

  Here's another option to run the BACK of the screen maximized in Vista with some possible solutions:http://www.walkernews.net/2007/06/03/how-to-maximize-vista-command-prompt-window/.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How do reset you the program back to Windows 7 compatibility mode?

  I tried to get a program runs on Windows 7, but it would freeze upwards.  Then I changed a setting in the program compatibility, try a Windows XP mode and a mode of Windows Vista (without success).  How to get out the compatibility settings and just go back to Windows 7?  Thank you.

  Hi dartglass01

  
  To change the settings for compatibility manually for a program, right-click the program icon, click Properties, and then click the compatibility tab. You can uncheck the option to run this program in compatibility mode dedicated

  
  You can also check out the link to below to get help-

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  I hope this helps.

• Delay in response to printer printing in a program BACK in Windows 7

  My OS is Windows 7. When I print a report in the program BACK the printer takes quite awhile to respond. Under Windows 98 operating system, the printer responds immediately. Help, please. Thank you.

  Hi Sammyva,

  If you are running a DOS application on Windows NT-based systems (Windows 2000, XP, 2003, Vista, 2008, Windows 7), you will find that your print jobs are spoulées after several seconds, sometimes minutes, especially when you print to a network printer.

  A typical program of BACK sends binary data (characters) to one of these ports (usually LPT1 :). A matrix printer can print the data as soon as it is sent to the port and before all data has been sent by the program.

  On Windows, things are different. Laser and other graphic printers must receive a whole page before making it on paper. In addition, several ongoing applications execution/printing on the same machine introduced the need for a print queue, including network printers.

  Thus, if BACK program does not close at the end of the print job printer port, then Windows doesn't work is really finished. He expects a value of timeout expires before deciding finally to spool the next job.

  If you are in this situation, you can close the DOS program as soon as he finished it. You'll see your print job start immediately, because all the handles back will be closed by the operating system itself, including the printer port.

  You can change the Windows timer above, to make the shortest. Do not set the value too low or the printer could start printing before the program BACK ended really create jobs.

  The timeout value is stored in a registry entry. TAKE CARE using RegEdit. It could be quite dangerous. If you do evil, your machine could even refuse to restart.

  In REGEDIT (START-> RUN-> REGEDIT)
  Click: HKey_Local_Machine
  then click on: System
  then click on: CurrentControlSet
  then click on: control
  then click on: WOW

  You will find the LPT_timeout property. Double click on the value that you can choose how many seconds you prefer, then restart your machine to apply the change.

  Unlike Windows, MS-DOS was a system of single-user operating. You can only run one program at a time, which could even keep the CPU set for itself, to work as quickly as possible.

  This causes a common problem for recent DOS running on Windows machines programs: the CPU hogging.

  In general, during polling of the keyboard (during a wait state), the BACK program performs an infinite loop to check as soon as possible. To BACK that caused no worries at all, but on Windows, the system could be so "busy" that no other tasks can be performed (including printing of spool, which usually begins when the DOS program has finished printing and is waiting for user input, usually in a menu).

  To check whether your own BACK program is hogging the CPU, please try to leave Task Manager open while he is on the run.

  Press CTRL + ALT + DELETE
  Click on the tab "performance".

  If the CPU usage go often to 100% using your program BACK, then you are facing this problem.

  Aziz Nadeem - Microsoft Support

• Installation of updates for Windows Vista error 80070490 message code

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Hey grown-sexy

  see if the below microsoft information arranges

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  If he did not correct it repost in the correct windows update forum below

  It comes to the installation of vista operating system instance

  Use the link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• Start Up Programs for my Windows Vista

  I have Windows Vista Home. Fix he has helped me a lot & saids now I have many programs initially upwards. How can I find only the programs that I need & stop or remove those that I do not use or need?

  Thank you, Ken

  It's a matter of TIME. The lst of startup programs varies according to the users. It depends on what one wants on his computer.

  I can only offer you an artcle getting of the subject. Read it carefully and see if you can make the head and the tail out of it.

  http://www.SysInfo.org/StartupList.php

• Installer of Modules of Windows Vista - Windows has stopped working... Configuration 3 of 3 to 0%

  original title: Windows Vista Ugh.

  I have Windows Vista Home Premium on a laptop Gateway. I get the installer of Modules of Windows has stopped working and has been the error message closed as well as the configuration 3 of 3 0% starting upwards.  Thank God the restart of death cycle is no longer happens, but it always appears when I restart/start my computer.  I have tried almost everything that I found online to fix this, and yet I still have these questions. I can not install updates to Windows due to the fault of the Windows Modules Installer every 3 minutes and I can't install SP2 even when I tried the 64 bit version of stand alone for my computer.  I literally a novel of installs failed in my history of windows because of this update and I constantly receive error messages when you try to install the update SP2 failed. I don't know what else to try now that I tried the system restore, and none of the dates are far enough for these errors go away.  Help, please.

  Check here the answer to the similar problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/popup-box-says-Windows-module-installer-has/ae2fbeba-6f15-4676-8ddc-9cd926a79730

  Tom Ferguson

  PS

  I've seen many references to Vista but Vista ugh is new to me. ;-)

  TF

• my pc had a new hard drive and came back without windows vista. I have no backup discs. Help

  the hard drive on my computer packed. I sent it for repairs under warranty and it was returned under Windows Vista. How can I get it back? THX

  Hello

  If you need disks in case of future problems regarding reinstallion after that fix you this problem:

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Where can I find my button Add/Remove program on my windows vista?

  I am unable to find the Add/Remove program on my computer. I use windows vista. I have looked under my control panel, but can't seem to locate it. Unfortunately, I'm not the best computer savvy person and need help. I would like to remove my a live windows care that it has expired and install a version of norton 360.

  I am unable to find the Add/Remove program on my computer. I use windows vista. I have looked under my control panel, but can't seem to locate it. Unfortunately, I'm not the best computer savvy person and need help. I would like to remove my a live windows care that it has expired and install a version of norton 360.

  Hey fireguy329

  You should look for programs and features on vista

  they changed it

  read the information on the links below

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Uninstall or change a program

  You can uninstall a program from your computer if you no longer use, or if you want to free up space on your hard drive. You can use the programs and features to uninstall programs or to change the configuration of the program by adding or removing certain options.

  1. Open programs and features by clicking on the button start , clicking Control Panel, clicking programs, and then clickingPrograms and features.

  2. Select a program and then click on uninstall. Some programs include the ability to modify or repair the program in addition to uninstall. but many simply offer the option uninstall. To change a program, clickChange orRepair. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  http://www.bleepingcomputer.com/tutorials/tutorial141.html

  and this is a very good graphical tutorial for her

  http://www.vista4beginners.com/Add-Remove-Programs-nowhere-to-be-found

  Walter, the time zone traveller