Installer of Modules of Windows Vista - Windows has stopped working... Configuration 3 of 3 to 0%
original title: Windows Vista Ugh.
I have Windows Vista Home Premium on a laptop Gateway. I get the installer of Modules of Windows has stopped working and has been the error message closed as well as the configuration 3 of 3 0% starting upwards. Thank God the restart of death cycle is no longer happens, but it always appears when I restart/start my computer. I have tried almost everything that I found online to fix this, and yet I still have these questions. I can not install updates to Windows due to the fault of the Windows Modules Installer every 3 minutes and I can't install SP2 even when I tried the 64 bit version of stand alone for my computer. I literally a novel of installs failed in my history of windows because of this update and I constantly receive error messages when you try to install the update SP2 failed. I don't know what else to try now that I tried the system restore, and none of the dates are far enough for these errors go away. Help, please.
Check here the answer to the similar problem:
Tom Ferguson
PS
I've seen many references to Vista but Vista ugh is new to me. ;-)
TF
Tags: Windows
Similar Questions
-
Installer of Modules of Windows has stopped working and was closed
Hello
I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago. When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed." I have already reinstalled Windows Updates and Microsoft Updates, nothing helps. Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
Help?
Thank you!Greetings mollypopsicle,
I see that we have always had problems with this update. This leaves me with the question about the possibility of fi computer update auto is damaged during download.
I would like to have you create a folder on your desktop. Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.
If you have a download manager, please use it to download the KB958623 update from this Web site
http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20
Make sure you use the version of Windows Vista that applies to your system.
Once the download is complete and before running the update
- Restart your system in safe mode with networking, as described in the above post from Brian.
- Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
- If this does not properly complete, were there a pop-up Windows indicating that an error? If so, what were these errors?
- Maybe it's that the error you receive is that this update does not apply to your system. If so, this update can be hidden in your list of updates.
Here is a link on how to hide the update
Select only the I'm getting offered an update from Windows that I don't want.
However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition. Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.
Thank you and continue to keep us informed of the State of this update.
Best regards
Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.
-
I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.
This happened to someone else? Is it I can do it fix it?
Hello
Since you get such a serious mistake, I would use the free incident reports.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Original title: Windows Vista 32-bit Edition home
Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.
HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.
Nobody knows what's happening with pc or how that I should do to fix this problem. Any help or advice will be
appreciated.
Thank you
EJ
Hello
1. you remember to make changes to the computer before this problem?
Method 1:
If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Put your computer in a clean boot state and then check if the problem persists
Follow step 1 in the link.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3:
The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.
-
Windows Vista Basic has stopped working on my laptop.
After my recent updates, Windows Vista Basic has stopped working on my laptop.
After my recent updates, Windows Vista Basic has stopped working on my laptop.
Hey shousell
stoppped working covers a lot
If you can not start, follow these steps
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
or transfer your question in forum windows update link below
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
Walter, the time zone traveller
-
I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
When you try to open a folder I get a pop up Windows has stopped working
When you try to access this folder and this folder, I get a pop up windows has stopped working. I ran a virus scan, memory diagnostics and now I am at a loss. If I didn't need some files, I would just delete the folder. All my other files and folders work fine and I have Vista. Please help :)
Signature of the problem:
Problem event name: APPCRASH
Application name: explorer.exe
Application version: 6.0.6002.18005
Application timestamp: 49e01da5
Fault Module name: mc_dec_mp4v.dll
Fault Module Version: 8.5.0.14265
Timestamp of Module error: 4b81ceb4
Exception code: c0000005
Exception offset: 00012d2f
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 4105
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160Fault Module name: mc_dec_mp4v.dll
Product name: Mainconcepta® Mpeg - 4 Video Decoder engine
Description: Mpeg-4 Video Decoder engineThis codec is try to preview the files in the folder. You can try unstalling the codec or him reassociate the file type (change the default program):
1. open default programs by clicking the Start button, click default programs.
2. under "Choose the programs that Windows uses by default", click "associate any type of file or Protocol with a program.
3. under the parchment of column 'name' down and look for '.mp4 and .mp4v', select one at a time then click on the "Change Program" button at the top right of the box.
4. in the "open with" box under "Recommended programs", choose another program or click on the Browse button below to select the program you want.
5 Click to place a check mark in the box "always use the selected program to open this type of file".
6. click on OK to exit.
Change the programs that Windows uses by default
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default -
Aero in Windows has stopped working
I am running Windows Vista Home Premium with Service Pack 2. Aero in Windows has stopped working. When this happened once before going to the control panel > change the color scheme and selected Windows Aero, but now this option is not listed. Checked the help and as advised checked my screen resolution and I saw 32-bit color, the verified value Advanced Configuration monitor and I saw this refresh rate is 60 Hz. Then forums got advice to run sfc/scannow and it came back and told me to Resource Protection Windows did not find any breach of integrity. Finally, taking advice to check that the graphics card by going to Device Manager but no device had anything by them which suggests that they do not work.
Help the old windows look terrible after using Windows Aero
Brett
Hello
Make sure that you are logged on as ADMINISTRATOR
My Vista Aero Glass is turned off, how can I enable them again?
http://www.howtogeek.com/HOWTO/Windows-Vista/my-Vista-Aero-Glass-turned-itself-off-how-do-i-enable-it-again/To the need to update or reinstall the video driver (it's a good idea in any case).
Solve problems with Windows Aero
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-AeroHow to enable or disable transparent Aero Glass on Vista
http://www.Vistax64.com/tutorials/75413-Aero-Glass-transparency.html--------------------------------------------------------------------
This utility, it is easy see which versions are loaded: (updated video/Display drivers and others)
According to the needs.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Explorer Windows has stopped working when you click FLVfile
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER
Hello
What version of the windows operating system is installed in the computer?
I suggest you to see link and check. (That applies to windows vista and windows 7)?
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
-
My computer keep saying windows has stopped working
My computer keep saying windows has stopped working. What can I do to solve the problem?
Hello
1. for how long are you facing this problem?
2. did you of recent changes made to your computer?
3. what operating system you run on your computer?
I suggest that you perform a clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Explorer Windows stopped working
-
Windows has stopped working properly
"" I have windows vista and when I try to surf the internet, after awhile, it appears as a small windows that says "windows has stopped working properly ' and it restarts not close windows. It started before this date sometimes more often until my pc broke down: it became a flashy blue screen with writing something like problem phsichical... damage discs and now I tried to format it but it seems like the same problem comes up... now I can't download it again up to a certain point It is stackable
Looks like your system is good enough corupted. I backup my data and restore the computer to factory settings. The procedure for this varies from a make and model to another, but should be in the documentation for your computer.
I hope this helps. Good luck.
-
I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is happening, please help.
Hello
Follow the suggestions and see if it helps.
Method 1
You can check if the problem exists in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usualMethod 2
If the problem persists, you can uninstall and reinstall the game.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-programYou can provide the event logs in Event Viewer.
You can provide the exact error in the Event Viewer logs to find out what caused the problem.
Open event viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
You can also see the article for more information.
The problems of the game performance
http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems -
Photo Gallery Windows has stopped working
I get the message "Photo Gallery Windows has stopped working" when I opened the Windows Photo Gallery and then closes WPG. All solutions? Help, please!
I get the message "Photo Gallery Windows has stopped working" when I opened the Windows Photo Gallery and then closes WPG. All solutions? Help, please!
====================================
Your photo library database may be corrupted.Maybe the following article offers some ideas:
Stops Windows Live Photo Gallery (944221)
answer or does not start
http://support.Microsoft.com/kb/944221/en-usFor Windows Photo Gallery... just change the path:
XP
C:\Documents and Settings\ > user name<\Local>\Local>
Application Data\Microsoft\Windows Photo GalleryVista
%UserProfile%\AppData\Local\Microsoft\Windows photo GalleryAfter Renaming Pictures.pd4 you will need to re-catalogue
your photos and some tags may be lost. If the name change
Pictures.PD4 does not solve the problem... you can delete
the new Pictures.pd4 file and change the name of the
origin to Pictures.pd4 and the catalog file should
be restored.In later versions of Windows Live Photo Gallery...
the file name may be Pictures.pd5.
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *. -
Microsoft Windows has stopped working a problem due to the closing of the program
original title: MICROSOFT WINDOWS has STOPPED WORKING A PROBLEM CAUSE THE PROGRAM to CLOSE__
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- MICROSOFT WINDOWS HAS STOPPED WORKING
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi Aries19,
Are a. When you this error?
B. recent changes made on the computer?
C. when exactly do you get this error?
D. don't restart your computer / closed applications after this error?
Let us try these methods.
Method 1: [Scan sfc] System File Checker
To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
1. click Startand type cmd in the box start the search.
2. right click on cmd in the list programs and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command calls, the following line and press ENTER: sfc/scannow
When the analysis is complete, test to see if the problem you are experiencing is resolved.
Visit the following link for more information:
http://support.Microsoft.com/kb/936212
Method 2: Virus Scan
You try to run a Microsoft online virus scanner and check if it detects something.
http://www.Microsoft.com/Security_Essentials/
Method 3: Clean boot
Clean boot uses a minimal set of drivers and startup programs and helps eliminate software conflicts.
(a) click Start, type msconfig in the start search box and press enter.
(b) under the Services tab, check hide All Microsoft Services.
(c) under the Startup tab, click on disable all, then click Ok.
(d) If you are prompted to restart the computer, click Restart now.
When the computer is in a clean boot, applications and third-party services are disabled. Once the computer is restarted, check if the problem occurs right now.
Check out this link that talks about how perform a clean boot
Note: Follow all of the steps in the link to know what software are contradictory.
http://support.Microsoft.com/kb/929135Don't forget to reset the computer in a Normal startup once find you what software is conflicting.
Hope this has been helpful.
Kind regards
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
On the computer startup, there is no button or the start task bar. window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working." I could get on the internet, but I have a blank desktop! What should I do? Re-stall the disc? I have a tower HP w / Vista bought in 2008. THX, Lizz
Hello
1. have you made changes on the computer recently?
Method 1.
Let us scan SFC and check that it prevents this error to occur.
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
To do this, follow these steps:
a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
b. type the following command and press ENTER:
sfc/scannow
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
More information on SFC scan found in this document:
http://support.Microsoft.com/kb/929833
Method 2.
a. also, you can try again user account if the problem is resolved.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-accountb. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
Fix a corrupted user profile.
http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profileLet us know if that helps.
Maybe you are looking for
-
can I add a 16 GB of ram for my macbook pro 2010 Middle
I was wondering if I could add 16 GB of ram for my MacBook Pro. It is a mid-2010 model.
-
How to use your laptop with ftp remote?
Dear Sir. Does any - one has information on the way to another computer, the files on my computer using laptop tecra M2 (ftp,...)Maybe a question too long to respond to?Thanks in advance Reg weekx
-
Drive necessary recovery for Qosmio F20
I lost my recovery disc for my laptop Qosmio F20-104 (I don't remember if he even came with any!). How do I restore my laptop to zero?I have the disk utilities and tools, but unfortunately, that's all... Help! Thank you Gee
-
Powers of the printer on but do not have orders. Displays what appears to be a symbol of power with a code starting with a letter followed by seven numbers. Currently, it reads B8076358. Will Flash media slots. If I press the power button, the un
-
(Redirected) R4 Aurora command center
I tried to reinstall the command center for my system on windows 10 and it is said that it is not compatible, I did as you said unplug, purge of the system power on can't get there can help, I would really like to have my command center once again th