Incorporating the very latest version of unity with Ericsson MD-110
I installed the CallManager unit, but I need to check some items with integration of Ericsson. I know I need a map of the voice, but what exactly are the ports used for? I see 4, 12 and 23 models of port and of course the ports they cost. Are there other things I need to know who can not be documented very well. I have the integration Guide series Ericsson MD-110 and I read through it.
Thanks for any info you can provide me.
Forehand Tim
Each port emulates an analog phone on your PBX. The number of ports you have is the number of concurrent calls that the unit will be able to manage.
The instalation guide gives some more details on the different maps of the voice, you would use.
And the system requirements doc shows what voice cards can be used with your PBX,
Tags: Cisco Support
Similar Questions
-
is it possible that I can work on a movie published in the latest version of first with a first CC 2015 version that has not been completely updated?
I m edition trailer of friends, but the very first version is not fully updated, so it does not recognize the project... Is it possible to fix this?
There is no way to go "in time" and do older versions of body include the latest versions of the project file format.
Sorting is to get your current version.
-
Download the latest version of iTunes with Windows 10
I can not download the latest version of iTunes with windows 10 to my laptop. I get the following message "the feature you are trying to use is on an unavailable network resource" I don't know what that means. Any suggestions?
Hello RavynnG,
Looks like you have a problem with the installation of the latest version of iTunes on your Windows computer, the error message you describe. Is this correct?
This sometimes occurs when the Windows registry has conflicting information on software are installed. One of the users of Apple for support communities - turingtest2 - has written a useful resource for this situation, found here - troubleshooting problems with iTunes for Windows... | Apple Support communities
Specifically -.
The following steps should remove the reference to a file missing .msi Windows Installer Service trying to access when installing iTunes.
- Press WinLogoKey + R, type Regedit in the Run dialog box and then press enter/return.
- Click on Edit > find, type the name of the file .msi problem, for example itunes6464.msi, change the boxes look so that only the data is checked, and then click Next. You should find it somewhere:
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\ {long string of letters & numbers} \SourceList - Right-click on the parent key immediate with the long string of letters & numbers that contains the list of sources with the reference to the .msi file, and then click export, save it to say the office with name iTunes.reg if the data can be restored if deleting it does not help. Now right click on the key again and select delete from the context menu. This should prevent the Windows Installer to search for the .msi file when you reinstall iTunes.
If installation will not yet pass by then double-click on the file iTunes.reg that you did to restore the data in the registry, and then use the method shown to install missing components to unpack the installer of your previous iTunes installation, then extract the .msi file, you need. Double-click this option to try to uninstall the component. There are links to recent versions of iTunes in the section of the older versions .
Once completed, you should be able to run the iTunes Installer, you can download it from this location - iTunes - download iTunes - Apple
Thank you for using communities of Apple Support.
Secure computing.
-
I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?
(1) temporarily disable your security/antivirus software
(2) download iTunes from the official source: http://www.apple.com/itunes/download/
(3) try to reinstall
(4) turn on your anti-virus
-
Most recent version of the Oracle client version is compatible with the low version
Most recent version of the Oracle client version is compatible with the Oracle DB low version
Client Oracle 10.2.0.5 version should be compatible with 10.2.0.4 DB?Yes - see on Oracle (ID 207303.1) support compatibility table
-
can I use the latest version of MAX with labview 6.0?
Description of the problem:
We have an old system running LabView 6.0 and MAX4.5 with NOR-DAQmx 8.7 and
NI-VISA 4.4.
We had a hard disk problem that fixed us and now MAX 4.5 with NOR-DAQmx 8.7
will be important is no longer the configdata.nce file.
The error message is:
The following products can not copy the destination system:
NOR-DAQmx 8.7: error code 0x80004005 (no description of the available error)
Continue?
OK, cancelWhat can I do to overcome this? Can I load the latest MAX and NOR-DAQmx and
expect it to work?Thank you
ChrisSoftware of NEITHER: LabVIEW version 6.0
Materials: Select one if your problem is related to the hardware device
Driver version:
OS: Windows XPPerhaps the. NCE file was created with an earlier version of max, while the version has been installed after?
If NEITHER responds, you might be able to send the file to look at.
-
Latest Version of Firefox with Win XP Pro SP 3
I have Windows XP Professional Service Pack 3 and I was wondering if it supports the latest version of Firefox and if it works well on it. I have not updated it since 3.6.28 because I didn't really like not the look and my mother was having all sorts of problems with his and Adobe. I recently lost my Norton Toolbar which was on top during the last update for 3.6 is released. I plan on upgrading soon and I was wondering if it would work on it. My moms comp its adobe crash there and its browser sometimes won't reopen after be closed.
Hi demonicvampiregirl,
Have you looked at the page system requirements for Firefox 11:
http://www.Mozilla.org/en-us/Firefox/11.0/system-requirements/
I think you'll be fine. It has some pretty significant performance on the 3.6 series so improvements.
Hope this helps!
-
Only supports the utility of fingerprinting the Chrome latest version 21
Hello!
The latest version of Chrome is 21 and this version is not compatible with the utility of fingerprint digital (I use the 2.0.0.6409).
So I tried to install the last Fingerprint Utility (fp - sw - 20120710162925.zip, version 2.0.0.9) but the installer should hang at some point, because I never get to see the installer itself, I see only the unziper (aka THOSHIBA Archive extractor).
So I don't know what to do to make it work.
Made the 2.0.0.9 FP utility version supports Chrome 21?
I can't find any info about this :/Thanks in advance :)
PS: I have a Tecra R950
> So I tried to install the last Fingerprint Utility (fp - sw - 20120710162925.zip, version 2.0.0.9), but the installer should hang at some point, because I never get to see the installer itself, I can only see the unziper (aka THOSHIBA Archive extractor).
I think you should download the package once more.
Then right click on the zip package and unpack the files.
Then you should see an exe, the exe file is too compressed so you must unzip this new.
Right-click and select Extract here.
Now you should see some files and now you should be able to run the installation. -
I tried to restore my Dell Inspiron E1505 laptop to the factory setting. I pressed F8 then selected repair and then Dell Factory Image Restore. Used to format hard drive. He formatted the hard drive and then he restored the system. Suddenly, a small window pops up without any details, but saying "error". I restarted the laptop, it entered into Startup Repair mode. But even once showed error "operating system version is incompatible with startup repair". I don't have my windows CD/DVD. Although the windows sticker is still on the laptop. Please advise me how to install the system on the laptop so I can use the same. Please note that I am in Gurgaon (India).
Thank youHello
Because the computer is located in a no start situation and you don't have the installation disc, it is best to contact the manufacturer for assistance.
-
latest version does work with weblogic 10.3.3
Hello
I just wanted to install linux obiee latest version which is 11.1.1.6 can we use weblogic 10.3.3.
The machine where I intend to install is having this version of weblogic.
I would not install weblogic since the installation of Bi for weblogic is already present.
Thank youOBIEE 11.1.1.6.0 only supports WebLogic 10.3.5 and 10.3.6.
Kind regards
Kalyan Chukkapalli
http://123obi.com -
VMWare ESXI latest version (downloaded today) with HP Proliant ML150G5 E5405
Hi al!
It's my server HP
I add 2 GB of RAM original HP + 2HD 250 GB HOT SWAP HP.
So I installed 2 drives in RAID 1 (using the tools LSI & lt; F8 & gt; starting the BIOS to handle the exchangeable hard drive hot).
I tried to install the latest version of VmWare EXSi to test virtualization... installation go right until the end.
But... after 1 minute the start of my vmware server screen are ready (the screen where you can press the FX for customization etc...). Pink .the screen display!
The content of this screnn is:
***********************************************+
VMWARE ESX SERVER 3i Releasebuild:123629
Exception type 14 worldwide 2429:sfcbd @ 0x6738a7
Frame = 0 x 4028 ds = 0 x 4028 fs = 0 x 4000000 qs = 0 x 0
EAX = 0x4c89898 ebx = 0 x 0 ecx = 0x4bdf054 edx = 0 x 11
EBP = 0x3ff7bc0 esi = 0x4bdf02c edi = 0x295a err = 0 eflags = 0 x 10002
etc... ETV...
VMK uptime: 0:00:01:14:409 TSC:148376637858
From coredump on disc using slot 1 of 1... 98766665432110 positive dump Disk.
Debugger is listening on the serial port...
Press ESC to enter the local debugger
**************************************************+
You know what's the problem?
TNX for any suggest...
Welcome to the VMware community forums. The discussion has been moved to the ESXi forum
Dave Mishchenko
VMware communities user moderator
Are you using the HP or generic installation CD? You can also try this to see if the GROUP is eliminated - http://www.vm-help.com/esx/esx3i/disable_CIM_on_startup.php.
-
See the title.
Additional, I prefer to put any default zoom factor.
Thanks for your ideas.
Wolfgang
P.S. I'm on a PC with WIN 7 PRO
Hi wolfgangh61220579 ,
would like to inform you that in MS reader, go to edit > Preferences > documents > "uncheck" the option for the tool pane open for each document, then click ok & restart the application
Kind regards
Christian
-
Upgrade to the latest version of 10g with patch requires users to rinse JS
Hello world
We recently improved of OBIEE 10.1.3.3.2 to 10.1.3.4.1. Once we went we also applied patch 9492821 for some quick fix of date. Our Test and Dev environments have Windows Server 2003 SP3 32 bit and we didn't really have much problems with the valuation process. Our Prod environment was RHEL 5.2 32 bit and we came across many problems with browsers of the users cached the old Javascript libraries. I'm not sure of 10.1.3.4.1 but I know the fix to update several of the .js files used by the presentation. Internet browsers (Mozilla and IE) had cached the old definitions of these files that caused the OBIEE front-end to throw some errors.
The main symptoms were that all guests began to fail. The report would show an error or the report would not filter on the guest at all. The work around I used was to have users press CTRL + F5 to clear manually out old javascript files and bring the news.
But in all honestly, we had a ton of users calling and we fear writing that OBIEE was broken, despite the many emails that we sent to help in the issue. Next time, we're doing an upgrade, we would prefer to avoid this problem together.
What is the best way to work through this issue forward to would handle this transparently to end users?
Thank you!
-JoeIt depends on the configuration of the user's browser, if everyone has the hidden in the same place on y machine, set up as shared folders and write a clever script to clean them when they log on the next time.
concerning
John
http://obiee101.blogspot.com/ -
In Itunes and adobe reader all the latest versions have problems with the Info button.
in Itunes no show buttons or the info for them, everything els is here, so the info botton if you move the cursor, if you can't find where they might be. Drive has the same problem but only in printing windo. Using Vista sp2 on a toshiba.
Hi J Jewell,
1. are you able to use other applications correctly?
2. were you able to use iTunes & Adobe Reader correctly previously?
3. don't you make changes on your computer before this problem?
If you face this question only in iTunes & Adobe Reader, I recommend you to uninstall the applications of the program & features. Subsequently, reinstall them & check if the problem persists.
To download Adobe Reader, please refer to this link: http://get.adobe.com/reader/
To download iTunes, refer to this link: http://www.apple.com/confirm/itunes/thankyou.html
Hope the helps of information.
Please post back and we do know. -
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes made to your computer installed new motherboard bundle
- What you have already tried to solve the problem
Hello
No, you can install a new copy of Windows XP Professional on the system. If the key is not displayed as authentic, you can try to activate the phone activation key. Click on the link below.
How to activate Windows XP
http://support.Microsoft.com/kb/307890
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I run a Mac Pro with El Capitan and iMovie 11 will not recognize my camcorder Sony FDR-AX35P 4 K
I run a Mac Pro with El Capitan. iMovie 11 will not recognize my camcorder Sony FDR-AX45P 4 K. He keeps asking connect a camera.
-
the majority of my mail in my Inbox disappeared
The majority of my mail in my Inbox disappeared
-
When will they be available for ZTE C open FFOS 2.0?
HelloI am a user of ZTE C open and I wonder when to get the 2.0 update.
-
I'm still resist 9.3.2 upgrade for my mini iPad 4. In the hope of some sort of clear notice at all. The questions seem to be among the older phones and iPads? any thoughts?
-
Measure the current and voltage using DMM sharing a port
I want to measure pressure several times on a pcb, where I connect the ports of digital multimeters to the card using simple cards. Switching between the different voltages is done using simple. If the black port of DMM (the second from the top photo