Incorrect page numbers after conversion of Excel to PDF

Similar Questions

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• Incorrect page numbers

  In PDF files paging starts after the page index, but cover drive is affected as page no. 1 so there is divergence in page numbers, when I try to go to a specific page in the PDF from Adobe files. I have ipad Air 2 Please tell me the settings to redirect pages

  Hi mugdhak92569568,

  Please note that Acrobat Reader for mobile applications, for iOS and Android screen physical (starting from 1) page numbers page not labels (i, ii, iii, iv) or logical page numbers.

  So, even if you change the labels on the page of your PDF using Acrobat Pro/Standard (paid in desktop application), the first page number displayed in Acrobat Reader mobile applications will always be 1.

  Sorry for the inconvenience.

• Incorrect page numbers: 1.1 instead of 1

  Hey,.

  I have a document where I want automatic page numbers, so I followed the instructions: Type > insert special character > markers > current Page number

  But instead of simply displaying the page number, it shows 1.1 on page 1, 1.2 to 1.3 on page 3, etc., on page 2. I think you can see where this goes.

  So, how can I get rid of this 1. (actual page number)?

  So far I could not find anything about it online, and I hope you guys can help me.
  
  

  And check to see if maybe your page numbers iincludes a paragraph style list numbered...

• The Bookmark Script list align Page numbers on the right

  Hello

  I have a script that lists the names of bookmark, and then the Page number after the bookmark as follows:

  Bill Smith #1

  Jeffrey Jones Page #5

  Christopher James Page #8

  What I would like the script to achieve is to list the bookmarks and then align Page numbers to the right of the pdf instead of mixed together.

  Please can someone tell if it is possible to do it in javascript?

  The existing code is as follows:

  / * All bookmarks in the list * /.
  / * Work recursive l‟arbre bookmark * /.
  function PrintBookmarks (bm, nLevel)
  {
  If (nLevel! = 0) {/ / do not print the root}
  bmReport.absIndent = bmTab *(nLevel-1);
  BM. Execute();
  bmReport.writeText ("" + bm.name + "Page"+ (bm.doc.pageNum + 1) ");

  }
  If (bm.children! = null)
  for (var i = 0; i < bm.children.length; i ++)
  PrintBookmarks (bm.children [i], nLevel + 1);
  }
  bmTab = 20;
  bmReport = new Report();
  bmReport.size = 2;
  bmReport.writeText (this.title);
  bmReport.writeText("");
  bmReport.size = 1.5;
  bmReport.writeText ("list bookmarks");
  bmReport.writeText("");
  bmReport.size = 1;
  PrintBookmarks (this.bookmarkRoot, 0);
  global.bmRep = bmReport;  do global
  global.wrtDoc = app.setInterval)
  "Try {'} '.
  +' reportDoc = global.bmRep.open ("list bookmarks"); "
  "+' console.println ("open Executed");"
  + "app.clearInterval (global.wrtDoc);"
  +' delete global.wrtDoc;'
  "+' console.println ("App.clearInterval Executed");"
  + "reportDoc.info.title = 'Bookmarks lists';"
  + "reportDoc.info.Author ="Bookmark Sequence list";"
  {+'} catch (e) {console.println ("Meanwhile...:" + e) ";}"}
  (100);

  Any help will be much appreciated

  The purpose of the report is seriously flawed. Beside the known bug page break in version 9 there are many other issues, such as the issue of alignment.

  The best solution I found that it was to place the page numbers on a new line then align them with dash and raise.

• I am trying to print PDFS from Safari, but can not see the page numbers

  I just opened a document PDF 700 + pages in Safari and need to print the odd pages and there, but I can't see the page numbers displayed when I scroll the document. When I view the same document on an iPad, the page numbers change when I scroll but on my iMac (with the help of Safari 10) they appear not at all - and 700 + pages is a lot to go wrong! The clues how I can spend on 'display the page number?

  The default Apple PDF Internet plug-in used by Safari does not display the page numbers (except if they are in the footer of the PDF document in question), and there is no setting in Safari preferences to turn on this feature. Your best bet is to download the PDF file, then open it in preview or Acrobat Reader, where the thumbnails will be the correlation to page numbers. Then you can select several arbitrary thumbnails using the control button to print those selected pages. In the Pages section of the print Panel, you select "Selected Pages in the sidebar".

  The PDF Internet plug-in installed by Adobe Acrobat Reader or Pro displays the page current and total page in its turnaround Panel. If there are page numbers in the footer of the PDF file accessed, they are not deleted. You must enable Internet Adobe plug-in to Safari preferences: Security Panel.

• Many sheets in Excel to PDF conversion - page numbers for all the leaves, not individual leaves

  I need to convert the number of sheets in Excel in a single PDF file.  If I select each sheet with a personalised décor, page numbers for this journal (1 of 10) (1 of 5), etc.  When I select multiple sheets, the page numbers through the leaves.  Instead, it is from 1 to 15.  Make sense?  How can I tell Adobe to let alone individual page numbers?  Thanks for your help!

  Hi Penny,

  This feature has been changed to provide the same page, numbering of the Excel experience provides when you print your workbook or worksheets to other printers.

  It is possible to convert each worksheet as a PDF and then combine these PDFs resulting. Who will provide the numbering of the page that allows you to get.

  Making the print-to-pdf and then combine is to use Ribbon Excel PDFMaker "Create PDF and perform the Action" button.

  You can create an Action that uses the functionality of harvesters or Acrobat watermark to add page numbers as you wish.

  Kind regards

  Charlene

• Automatic page numbers displaying incorrectly

  I only use Indesign CS6 about once a year for work. I had the same thing happen last year and managed to solve the problem but, for the life of me I don't remember what I changed.

  When I add automatic page for master pages numbers, two-digit numbers appear just to left instead of left to right. For example: "10" displays as "01", displays '12' '21' and so on.

  Does anyone know how to fix this?

  I finally thought to it. The text box was too small and was originally the text to display incorrectly. I did the larger box, and it fixed the problem.

• All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  I run FrameMaker unstructured 12 and FrameMaker 11 (for use with only the heritage project files) on a Win7 PC. The chapters in my FM11 file book for guide increment a new product user normally in FM11, but something bad, after you save the formatted FM 12 FM 11 project files.
  The book file includes:
  -Product Guide Cover.fm
  -Product GuideTOC.fm
  -Product GuideLOF.fm (list of Figures)
  -Product GuideLOT.fm (list of Tables)
  -Product GuideContent.fm (chapters 1-10) - book files dialing properties: Chapter 1 (digital)
  -Product GuideIX.fm (Index) (Chapter 11) - book files dialing properties: Chapter 2 (digital)
  
  Note: The chapter headings (e.g. 1 - Introduction, 2 - Specifications and so on) in the product GuideContent.fm and GuideIX.fm files are in the format paragraph Designer like: (the Auto-Numbering Format enabled) H: < n + > \t
  However, when I update the book, the Index seems formatted as Chapter 1 instead of Chapter 11. It seems that the conversion to FM 12 messed autodial in the product file GuideIX.fm, so that the only way to increment the value would be to manually update the building blocks in the file to H: IX.fm \t H: < n + > < n = 11 > \t (which I do not). Any suggestions would be greatly appreciated!

  Thank you - Randall basin

  Hi Ran,

  It's for anyone finding the subject, given that you and I come to chat with a screen sharing...

  After watching your files, the "chapter number" are really only section numbers, with all 10 of them in the same file FM. That means that really impossible to use the <$chapnum>for many of them and the index.

  In most cases, you would be still able to use the Fm 5.0 manually counting technique paragraphs title with an indicator of the series and the counter (e.g. H:), but you also have a number of positions within blocks of text not included in the stream.

  This seems to be your address update index position correctly.

  So, the only way to get the appropriate index number is to control it manually. You have at least 3 choices:

  1. Enter it manually
  2. Manually enter the AutoNumber box for the index
  3. Enter it manually in the numbering section of the dialing properties tab.

  However, all these things are extra bandages on top of your existing bandages, and I prefer to see the problems resolved instead of the 3 'Hacks' I have provided.

  For the sake of closure, please check the question if this seems to be specific for you.

  Sorry for the bad news (ish)!

  -Matt

• Missing Pages and Numbers after upgrading to El Capitan.

  I have spend Lion, El Capitan, expecting the apps, Pages, and Numbers to be installed as part of the upgrade. I understand that these applications have been made available in the upgrade to Yosemite. If it were, why haven't they installed when I upgraded to El Capitan. Thank you!

  Pages, Numbers and Keynote (iWork alias) applications were never part of any Mac OS X. They came with the new Macs, in previous days on the CD/DVD/card reader, later as a free download from the Mac App Store. In the App Store, it must be associated with an AppleID downloading for the first time.

  Usually an update/upgrade does not remove these applications. But if they were very old versions (not compatible with El Capitan), they could have gotten deleted during the upgrade process. The latest versions are only available via download on the Mac App Store. Check your purchases if you have purchased or registered before. If this isn't the case, then you will need to buy them.

• During a conversion attempt has us page to PDF in explorer11, does not in all folders in the list of the file Explorer. The olny happened after conversion to win 10

  During a conversion attempt a webpage to PDF in explorer11, does not in all folders in the list of the file Explorer. The olny happened after conversion to win 10

  Hello

  We could not see the attachment. Let me tell you how you can attach the file.

  1 - Select the icon of the image of the top toolbar.

  

  2. then click on "select a file".

  

  3 - Select the image you want to download.

  

  4 - Click on "insert image".

  

  I hope this has been helpful.

  Thank you!

  Shivam

• FrameMaker2015 - Page numbers in the mess after the printing of 'last leaf' first.

  There seems to be no facility to reverse the order of page numbers when creating long Arabic & Hebrew documents and where the pages are to be attached at the end of a series of normal pages left to right .

  I was hoping this would be an automatic feature - for executives of 8-12 in Arabic, I had to save the document to the Mif and run a VERY complex program that extracts the folio box and puts managers folio on pages of body that then let me reverse the order of page number to hand.

  Bob

  Post edited by: Bob Wallace to change from RTL to LTR

  I think that you have to maintain the FM document sequentially even for Arabic pages i.e. Page 91 should be the first page of Arabic and so on. Now the booklet and PDF can be generated as follows:

  • When the booklet, you can select 'last leaf first' to Arabic range(91-100), and this page can be added with the other pages(1-90) LTR. For the booklet page numbers would look like 1, 2, 3... 90, 100, 99... 91 and so when the Arab user would read the Arabic content in the booklet, he would begin reading the content of page 91 and for him that the page number would increase also 91 to 100, he was reading.
  • For the PDF, you can directly generate the PDF file.

  Let me know if that makes sense.

  Thank you!
  Hard

  FrameMaker engineering

• After that I created a PDF file, can I add individual page numbers to its content?

  THEN I CREATE A PDF FILE, HOW OR CAN I ADD PAGE NUMBERS TO ITS CONTENT?

  Hi RIFE6000,

  You can use the header function & shaped foot in Acrobat to add and page numbers. Please visit: using Acrobat | Add headers and footers Bates numbering in PDF format

  Best,

  Sara

• Incorrect page in index numbers

  I generate a Word with RoboHelp 6 HTML document.
  
  The generated index contains entries that always point to the first page of the topic (chapter) even if the keyword is included, for example, on the fifth page of the subject. Nobody could find information!
  
  What is the soltuion to the case described for the correct page numbers in the index?
  
  I think that it is really a challenge for help is very appreciated.

  Sorry, but that's how. Remember that the Index in RoboHelp works that is to associate a keyword with a subject, this keyword doesn't have to be in the topic for that to happen. Kind of RoboHelp associates the Word key the subject rather than any part of it.

  For some reason any, so that you can associate a keyword to a bookmark in the online help, which could be used to reach your goal, that does not have Word. Have not tried to make this work so. Might be interesting to explore.

• Change the Page numbers and Sections in a book once it's underway?

  CS5.5

  10.6.8 MacBookPro

  I'm working on a book of 450-500 pages with 4 chapters, 150 + images full page of text, end and beginning of information (title page, preface, introduction, table of contents, annexes, glossary, end notes).

  I booked three chapters using the InDesign book feature, now works on the bits before and end and a final chapter (actually Chapter 1).

  I watched the excellent video of Michael Murphy on the feature of the book, and it adds the page numbering and sections before he created the model. I make them after I have chapters in the book.

  A question:

  How can I add a separate paging once I have booked several chapters?
  I also want to add an article and before any style i, ii, iii, etc., and after 1, 2, 3, 4, etc.

  Second question

  How can I add the title of the book to all the pages in the left hand and the title of the chapter on the right pages now? I've never done it in InDesign, and my attempts after reading aid do not work even on a chapter outside the service book. In the book feature, I don't know yet how to start.

  Thank you very much!

  A question: same thing if you are working on a single document to create a doc of island new section where you want and adjust the figures. Numbering book will adjust when you synchronize the numbers in the book panel.

  Two Qusruib: put this stuff on master pages. Title of the book is not likely to change from page to page, then type this information in a text block. To the chapter title, use a running Header Variable (see variables in the help).