Increase consumption of memory over time

Similar Questions

• Increase video exposure gradually over time

  So, I made a timelapse in which photos is receiving more light to begging for more dark at the end of the day, because the natural light conditions also changed. I couldn't change the shutter speed, iso, openness throughout the process, as it has been set to manual. Is it possible to add an exposure effect that could change the exposure over time, gradually as a result of 0 to + 5, to compensate for the video to penetrate slowly more dark. I hope you get the idea. Or I have to manually change exposure from sources including ar images darker before making the timelapse video. Thanks in advance for answering the question.

  Add an adjustment layer for your offsetting effect, then:

  Addition, navigate and defining the key - Pr images

  http://help.Adobe.com/en_US/PremierePro/CS/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7e63a .html

  Adobe Premiere Pro help / adjustment layers

  http://helpx.Adobe.com/Premiere-Pro/using/help-tutorials-adjustment-layers.html

• AnalogWaveform - problem of memory over time?

  I need to implement multiple graphs, each with a unique set of data.

  WPF, data application is related in an AnalogWaveform proberty XAML.

  For as far as I can see there's no opportunity to clear or reset the AnalogWaveform, if it grows and bigger with time, until that all memory is fed up. (See the example of a link on the next page)

  http://zone.NI.com/reference/en-XX/help/372636F-01/mstudiowebhelp/HTML/wpfgraphplotting/#DataSource

  1. Why is there not a clear option for that? How can I reset without creating a new AnalogWaveform

  2. any other chance to bind data via xaml to NEITHER: Graph?

  Link doesn't seem to work, affecting only "Chart1. Data source"in code-behind will result in a visible plot.

  The example that you have accessed to seeks to demonstrate binding data with the least amount of code possible. With the help of analogWaveform.Append integrated of the waveform change notification is used to warn the new data graphic. However, as you have found, just creates a wave of increasingly wider, leading to memory problems.

  If you want to keep the history with a fixed capacity, you can use the ChartCollectionAnalogWaveform . If you want to display individual signals, you can use a more common form of WPF data binding where we use INotifyPropertyChanged to notify that a new waveform is available:

  public partial class MainWindow : Window, INotifyPropertyChanged {

        private AnalogWaveform analogWaveform;

  public MainWindow( ) {

            InitializeComponent( );

            graph1.DataContext = this;

        }

  public AnalogWaveform Data {

            get { return analogWaveform; }

            set {

                analogWaveform = value;

                PropertyChanged( this, new PropertyChangedEventArgs( "Data" ) );

            }

        }

  public event PropertyChangedEventHandler PropertyChanged = delegate { };

  private void button1_Click( object sender, RoutedEventArgs e ) {

            Random random = new Random( );

  int pointCount = 100;

            double[] data = new double[pointCount];

            for( int i = 0; i < pointcount;="" ++i="">

                data[i] = random.NextDouble( );

  Data = AnalogWaveform.FromArray1D( data );

        }

    }

  You can also expose Data as a dependency property in this example, that would manage the notification of changes automatically.

• Sky of memory over time, bad performance rockets.

  I noticed when I come home from work, my Fire Fox is incredibly bad. Tabs take a while to open, has a time mouse wheel scrolling, etc. You tube video could pause and stutter on video but audio is fine. I started to exercise oversight and it is the fact that my wife will open 10 windows, sometimes with tabs, but never completely close all of them. When I get home, its 1, 5-2, 2 GB of memory used in the Task Manager. I tried everything: memory and cluttered with references to facebook, even if no facebook tabs are open. It can have 1 or 2 tabs for recipes.
  The only solution is to close FireFox all together and then open.
  If I lose its tabs open, she gets a little upset, so I have to kill the exe in the Task Manager, so when I reopen it, it will offer to resume the previous session.
  It is a simple touch of the tedious after a few weeks.
  Is there a different command or something I can do to leave current windows hunting fair and open on all used storage space that?

  Hello, these quantities of used memory can't be normal, even with a few windows open. as a troubleshooting step, you can try to reset firefox (this will keep all the Favorites and passwords): Firefox Refresh - reset the parameters and modules

• Make an increase in AO signal over time

  Greetings,
  I'm new to LabView and try to do a few simple programs.
  I want a signal voltage 0 - 5 V in 20 sec.
  For my first program, I added a slider and connected to the DAQ Assistant, so that I could manually control the tension between 0 and 5V.
  Could someone help me with this problem?

  Thank you

  Here is a picture of what Dennis, maybe this will help.

  

  I have everything on the labeled diagram so you can look for more specific help if you need.

  We have also a few tutorials available basic here: http://www.ni.com/gettingstarted/labviewbasics/ and training here: http://ni.com/self-paced-training

• Memory lost over time in my C: drive

  I noticed over time that I lost memory over time in my C: drive. I have about 500 GB, now showing only about 3 GB of space left. I have some downloads, but nowhere near 400 GB (I had pictures, but they deleted the hard drive that saved the GB)

  What would cause it to lose so Go? only from downloads?

  Was going to do a restore system to delete everything and start again see if that can solve the problem, but when I went to do this, he tells me that I need a backup of windows 7 Professional disc.  Went to the microsoft site, but could not find.

  Could I download another version of windows, and it will work correctly?

  Hello

  It is now called the disk space to avoid confusion with the RAM, which is the main memory.

  ____________________________________________

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Advice on the restructuring of code to avoid the downturn over time

  Hi, I am a new user of LabView, you want some advice on how to better structure the program I wrote and which is used to perform a hydrostatic test arrangement. Data are collected on a module of AI cDAQ 9207 and a cDAQ 9474 module is used to control the two valves that subsequently controls pressure in and out of the test Chamber. I enclose my first version of the reference code.

  What the VI is supposed to do when the user of the weapon system and strikes then the execution, the program switch will cause a transition of the test chamber through several States corresponding to the levels of different pressure for some time. Time curve vs pressure is written to a file of measures. I built using a state machine structure.

  My problem is, during the initial trial, when the duration of the test was about 5 minutes or so, the program went very well. However, once I started to test the length of the actual test of 2.5 hours, I noticed the program running slower and slower as time progressed to the point where it would take several seconds for each iteration of the loop, then by accident about an hour or two in the test. After scouring the articles and messages, I suspect the main culprit is the diagram of waveform and to a lesser extent DAQ assistant.

  While I need the loop structure data collection and case to run pretty quickly (preferably the order a few hundred s/s) I need the code to be able to react to changes in pressure in the room quickly enough, the actual data, that I need to store and display the graph can be as slow as a sample per second or even longer. My guess is at this point that I have to rebuild the program using some sort of architecture of producer/consumer, I'm looking for some advice on how best to structure the program.

  Data acquisition obviously belongs in the producer loop that will run at a fast enough pace and there will be a consumer loop that will run at a much slower pace for the Bulletin Board writing to the extent of the file vi, but where should I put the case of structure state machine which currently controls the valves? Should put in the loop of the producer since it must run at the same fast pace as the collection of data, so it can react to changes in pressure or should I build another loop of consumer for him? What other indicators (pressure and Boolean) and controls on the front panel, they should be on another loop operating at a medium speed I want to respond to a faster pace than the data to the chart/write the loop, but they do not need to be as fast as the data acquisition loop?

  Finally, I'm not quite sure what would be the best way to reduce the sampling rate of the data that I have in fact appear on the graph and the store in the file, it wouldn't make sense to create another task of measurement that samples at a rate below just for that purpose. Suggestions and advice would be greatly appreciated! Thanks in advance!

  Bob

  My guess is that if you monitor the use of memory over time, you see that going up, Yes? Everything is is always a good idea to get rid of the express VIs, I would look for the problem of slowdown in the structure of the case. You repeatedly open and never close tasks which are created using some DIO channels. Hnece each time that the loop more memory is allocated. Try to move creating channel screws out of the loop, then the tasks are created once before the start of the loop and then written to as required inside the loop - and don't forget to delete tasks once the loop over.

  Mike...

  PS: You are right with your comments regarding the structure of the producer consumer. Basically it break up as things get quickly (DAQ IO) that there is in a loop, while the user interface and the stuff that can take a long time (such as the data record) are in another loop. You can even have three loops with one for the acquisition of input data and the other for the digital output.

  PPS: Finally don't forget that even if the structure of consumption of the producer is usually represented with everything in a single diagram, there no need to be. I wrote a lot where each loop is in his own VI which is run dynamically, then the application starts.

• Poor memory - rendered Management slows over time

  I noticed a problem with my renders involving sequences. animation and not purely of the layers of things etc, but based on sequences of images as assets. I have a lot of free RAM initially with no other open applications. When I start making my CPU usage is very high and AE takes memory and gives him a number of aeselflink processes. Over time however in my iStatMenus I can see my 'active' RAM drag and my 'inactive' RAM goes upward, while at the same time my CPU usage slowing down my render grinds gradually stopped. It's like once it loads an image of my images in RAM for rendering, that he cannot let go of it completely once it is done so gradually, he eats all my RAM and my rendering slows down. If I stop the rendering and nothing do but running an application to empty all the 'inactive' in 'memory' memory and restart immediately made things are in their fast normal operation. He then proceeds to gradually slow down again. Everyone knows what is happening here? All the images located on the external eSATA drives and are made to external eSATA drives. Here are my specs for reference:

  AE CC 2014 (v 13.0.0.214)

  Mac Pro (early 2008) 3.1 8-core

  18 GB OF RAM

  Memory and multiprocessing:

  18 GB installed RAM

  RAM to leave for other applications 5 GB

  CPU reserved for other applications 2

  Allocation of RAM per CPU / 3GB

  Real CPU that will be used 3

  Any ideas would be greatly appreciated. Thank you!!!

  Robert

  What is the State of reduce the size when system is low on memory Cache preference?

  I describe this preference here:

  http://blogs.Adobe.com/AfterEffects/2012/10/after-effects-CS6-11-0-2-update-bug-fixes-and-added-GPUs-for-ray-traced-3D-renderer.html

• I want to increase the speed of scaling over time, but I have no idea how do.

  I don't know how I explain it, but as the title says, I want a clip to scale upwards or downwards faster over time. I've checked everything but I couldn't get on mine. Any help would be appreciated

  Too bad everyone! I found it myself. That's what I was looking for https://www.youtube.com/watch?v=vbI-qmTTGww

• How to increase the video memory on Portege Z830 - 11 M?

  Hello!

  I have a Toshiba Portege Z830 - 11M. I want to increase the video memory.
  I don't know if it's possible and how to do it. I tried to open the bios by pressing the F2 key (as in the product specifications, I received with my laptop) and I arrived at the Toshiba help settings. The ESC and F1 keys open the Windows startup settings. If anyone can help me, please advice.

  Thank you very much.

  Hi Mishal

  In general the Portégé Z830 - 11 M is designed to escort us in usual daily activities such as sending mail, Office Automation and communication internet and feature thin and lightweight design allows us to take it anywhere.

  Hardware configuration has limited the performance of course, but at the same time offer excellent multitasking and long battery life. As far as I know on this machine you will not find any option to increase the performance of the GPU and everything that it works automatically.

  According to some feedback non demanding games should be playable with this graphics card too.
  I can't imagine that you want to play games with this machine so I would like to know what it is to ask about the graphics performance more.

• Want a ramp of output voltage over time and measure input 2 analog USB-6008

  Hello

  I want to produce an analog voltage output signal that increases over time with a certain slope, which I'll send in a potentiostat and at the same time I want to read voltage and current (both are represented by a voltage signal) that I want to open a session and ultimately draw from each other. To do this, I have a DAQ USB-6008 system at my disposal.

  Creation of the analogue output with a linear ramp signal I was possible using a while loop and a delay time (see attachment). Important here is that I can put the slope of the linear ramp (for example, 10mV/s) and size level to make a smooth inclement. However when I want to measure an analog input signal he's going poorly.

  To reduce noise from the influences I want for example to measure 10 values for example within 0.1 second and he averaged (this gives reading should be equal or faster then the wrong caused by the slope and the linear ramp step size.) Example: a slope of 10 mV/s is set with a 10 step size. Each 0.1 s analog output signal amounts to 1 mV. Then I want to read the analog input in this 0.1 s 10 values)

  Because I use a timer to create the linear ramp and the analog input is in the same loop, the delay time also affects the analog input and I get an error every time. Separately, in different VI-programs (analog input and output) they work fine but not combined. I searched this forum to find a way to create the ramp in a different way, but because I'm not an experienced labview user I can't find another way.

  To book it now a bit more complicated I said I want to measure 2 input analog (one for the voltage of the potentiostat) signals and one for the current (also represented by a voltage signal) and they should be measured more quickly then the bad of the analog signal. I have not yet started with because I couldn't read on channel work.

  I hope someone can help me with this problem

  An array of index. You want to index the columns for a single channel.

• Get information from change of color over time

  Hi all

  I am new to LabView and on this forum, so I hope I'm in the right subforum. If this isn't the case, it would be nice if a mod could move this thread.

  My problem is the following:

  Let's say I have a white spot I want to observe with a camera. The color of the spot turns green over time and I want to acquire the photo, as well as to get the color intensity of green increase developing countries over time. I do not know what features I need to use to get there. Can someone me hint in the right direction? I think that it is at least possible in LabView.

  Thank your all for your help.

  Best regards

  Tresdin

  I don't know what the best resource for IMAQdx pilots, I think that the examples that provide OR are pretty useful. Here's a simple VI which will tell you the average value of green of all the pixels in your image.

  

• Svchost size seems to me like svchost (s) becomes larger and larger over time (between restart).

  original title: svchost size

  It seems that svchost (s) becomes larger and larger over time (between restart).

  He/they tend to reach the top of the sort (PWS) in memory of my task manager.

  It automatically get rid of her... whatever... it is now for use by more than one process (when they are no longer used)?

  If not, is there a way for him to say?

  Hello

  Sometimes you try more than once (the link of MVP) and there may be a site
  issue.

  Try this link to my profile
  https://MVP.support.Microsoft.com/profile=D2CBAC3A-D59A-4085-BA97-22B57FD00DF2

  Here is the link to the signature
  https://MVP.support.Microsoft.com/profile/Rob1

  I tried to answer the question in paragraph 1 above. Unless you encounter
  a kind of system problem the SVChost in Taskmanager will vary, in particular
  so shortly after a restart. And when you use the computer SVChost entries will be
  adding and removing management tasks on the fly. Check the information in the upper part
  two links in my previous answer.

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Increase the video memory of the A40-211

  Hi all

  I have the Satellite A40-211. The Intel chipset also supports all of the graphical stuff, so he needs a little more memory RAM as video memory. This is possible up to a maximum of 64 MB. The problem is that the chipset is now using a maximum of 16 MB of video memory, but I want to expand this to 64 MB.

  Where can I find the settings for this in Windows XP Home Edition?

  Thanks for all the help!

  Bart

  Hi, it s not possible to increase the video memory yourself!

  Let me tell you that your laptop is a dynamic memory management

  Your computer system reserved graphic only as much memory as it needs to accomplish all tasks running on your A40.

  .. dynamic video sharing .This is not bad, as I think!

  More info on your graphics chip basic find on pages of Intel.

  good evening...

• Since the installation on my Windows 7 64 - bit installed, Firefox has constantly gotten slow that hour passes, hangs for 10-15 seconds at a time and just gets worse over time with updates and all.

  Since the installation on my Windows 7 64 - bit installed, Firefox has constantly gotten slow that hour passes, hangs for 10-15 seconds at a time and just gets worse over time with updates and all. It was fast when I installed first, but of the six latest mos has slown to a crawl.

  upgrade your browser Firefox 8 and try

  • getfirefox.com