Increase of subform alpha (letter) when you dynamically add a new page

Hi all. I have a question to which I am very confused about. I know very little script, but I really like LiveCycle. I am currently using LiveCycle Designer ss4, Version 11. I managed to create a form that I can add pages to by clicking on "Add a Page" using the Instance Manager. However, I need the form works as follows:

1. the alpha character must increase by one for each addition of page (A, B, C, D, E... etc.).

2. I've limited the dynamic lines of the 'volunteers' to 3, and I would like to have the name "printed" appear on pages that are dynamically added so that they do not have to re-enter it on every page.

The only area that needs to be dynamic is "volunteers". I want the user to be able to add as many sheets as necessary (A, B, C, D +) and each page spread information from "Volunteers" to the next page (s), but each occurrence of the page must be a number of static pages. (that is to say... 1 page will contain information for the element 'A', Page 2 contains information for the element 'B', etc. "And these pages of the individual item should be a number of pages).

Any help at all would be so much more appreciated. I have been research and tested this form using different methods I found here, but I can't find a solution to these problems.

(I tried to download this file, but I get the error "You are not allowed to create or update this content"? So, I have attached an image of the form, which will do little good I don't know.)

image.JPG

Thank you in advance.

Post edited by: Aimee Stephenson

Hello

You can generate the letter that you need with the following code in the event of the object calculate TextField (if you use a text object, you may need to change and make protected and remove the legend)

String.fromCharCode(0)) (65 + Page1.index);

This assumes that page 1 is the thing that repeats.

Not sure I understand the little letters volunteers.  Do you mean names are enter on the first page, then copied into each of the following pages.  If so it probably depends on how you structured your. table, if you have Row1, Row2, and Row3 then opposed in their calculation of the events you might have code like;

If (Page1.index > 0) {}

PrintedName.rawValue = form1.resolveNode ("Page1 [0].") Volunter.Row1.PrintedName") .rawValue;

}

Were the part perhaps Row1 will you need to change Row2, and Row3,.

Here is an example that might make more sense.  https://sites.Google.com/site/livecycledesignercookbooks/home/aimee_boise.PDF?attredirects = 0 & d = 1

Bruce

Tags: Adobe LiveCycle

Similar Questions

  • Why focus/cursor selects the address bar when you click in a new page?

    This happens all the time, but most of the time... When I browse a site by clicking on the links, whenever a new page load the address bar is chosen to start typing. When I go to scroll down (using the down arrow/page keys) he'll scroll rather recent page URL in the address bar, instead of scrolling to the bottom of the page.
    Looks like this behavior just started today...

    To be clear, that's not something to do with the tabs, pages open in the same tab by clicking on the links at left will also affect the cursor to the address bar.

    I don't think I'm in safe mode, I tried to reset firefox and this still happens. If this does not work as expected, can I disable it?

    You open links in the same tab?

    This also happens if you click the link to open the link in a new tab?

    Have you checked for problems caused by plugins?

    In the Firefox Safe mode, these changes are effective:

    • all extensions are disabled (subject: addons)
    • Default theme is used (no persona)
    • userChrome.css and userContent.css are ignored (chrome folder)
    • default toolbars is used (localstore file - safe.rdf)
    • JIT JavaScript compilers are disabled (subject: config page: javascript.options. * jit)
    • hardware acceleration is turned off (Options > Advanced Options > general)
    • plugins are not affected
    • preferences are not affected

  • IE7 freezer when you navigate to a new page on the Satellite A215-S4697

    Hello

    I just bought an A215-S4697 three days ago. Love the computer so far, except for one question. Every so often, my internet explore freezes when navigating to a new page or by clicking on a link. Can I open another IE window when that happens, but I have to use Ctrl-Alt-Del to close the trial.

    If anyone has had a similar problem and know how to fix? I think maybe one of the programs of Toshiba is the cause, but that's just a guess.

    I read somewhere about software of fingerprint reader update which fixes a similar problem, but my machine doesn't have a fingerprint reader.

    Any help would be appreciated. Thank you.

    Hmmm, I also read on the issue of Internet Explorer and the software of fingerprint authentication.
    Found this
    http://support.toshiba-tro.de/KB0/TSB6701I80004R01.htm

    An update of the software of fingerprint authentication helped solve the freezing of EI.

    But as you say, this software is not installed on your Satellite.
    In your case, I recommend reinstall Internet Explorer on your computer. Maybe it helps.

    PS; Have you tried to use the internet browser Firefox?

  • fix for you receive a "Multiple controls with the same ID" error message when you dynamically add UserControls set caching for Web Forms

    where can I download this fix

    Follow the instructions in the article you cited.  Microsoft will provide you with a download link after following due process.  There is no charge for it.

  • How do you define the ID of a symbol when you dynamically add it to the stage?

    I use this to try to give the symbol ID:

    s.setVariable ("id", data [i] .title);

    The problem is that I try to hide all the symbols later on a button, click. I can't understand how to hide them. I tried to use Firefox to inspect the divs in the browser, but they all show that:

    ID = "Stage_92".

    ID = "Stage_93".

    ID = "Stage_94".

    etc.

    Any help would be appreciated.

    I'm sorry that I had the previous version.  In any case simply use addClass() and it will work. However, you need to add jquery in the script Panel.

    Here is the current version

    https://app.box.com/s/7umo8jjzry9we7admd35m39l1f166bm6

    the symbols that you use to create

    getSymbolElement()

    Instead of

    element

  • When you go to a new page, this page is displayed in the left sidebar, no not as a new window.

    From my home page, I try to go to one of the sites I have tabs on top. Instead of going to a new page, the target page opens in the left sidebar of my homepage. I can't make a whole page.

    Hello, please right click on each bookmark, then select properties and make sure that load this bookmark in the sidebar is disabled...

  • When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?

    When you use find on the page (ctrl + F on Windows) it is a message indicating the total number of matches. What does the first number?
    I'm more interested in the case when this number is smaller than the total.

    Hello

    I think you mean the text stating "x of there matches", to the right of the box where you entered the search term.

    The first number ("x" in my example above) indicates the current entry highlighted on the page that matches the search phrase. If you use the upper and down arrows to navigate through the instances of this term on the page, you will see this number go up and down.

    I hope this helps, but if not please come back here and we can look at another solution for you.

  • Error when you open Add or remove programs: "failed to create value" At Line 451 how this can be corrected?

    Once all updates completed, I now can't add remove programs to work.

    I get the following in a box error message: "failed to create value"at line 451.

    Someone knows how to fix this?

    Hi ZebWebb,

    1. What service pack is installed on the computer?
    2. You have security software installed on the computer?

    If you have recently installed Windows XP SP1 on the computer, then see the article and check if that helps.

    Error when you open Add or remove programs: ' failed 'at line 410' of value creation.

    http://support.Microsoft.com/?kbid=823768

    If you have not installed Service Pack 1 of Windows XP on the computer recently then check if the problem persists in the safe mode and after return details.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

  • Shows HP LaserJet 3330 horizontal lines exactly each 1.5 "when you print a completely blank page

    HP LaserJet 3330 shows seven or eight approximately 3.5 "cloudy horizontal lines spaced exactly each 1.5" even when you print a completely white page. This also happens when copy and fax.

    There are also 2 very thin vertical lines running down the entire page about in the middle. They are exactly 1 "apart.

    However, a scan of a blank page on my computer (not printed) is perfectly clean.

    Windows 7. No change or upgrade.

    Propbably the toner cartridge, if they are 1.48 "apart that it could be the cylinder in the process of development or the charge roll who are both in the toner cartridge. So a good assumption if you replace the toner cartridge, the problem will disappear. Vertical lines could also be part of this issue.

  • No preview image deployed when you try to import new images, no possible imports all the

    Hello

    I use Lightroom 5.7.1 on a 'Late 2012 iMac' with Yosemite OS X.

    I installed Yosemite first and then Lightroom 5.

    After that I encountered the first problem (no preview images shown the import module when you try to import new images, the central part of the screen remains black, now shaded not extracted, nothing, no possible to import at all), I tried all possible changes to checkboxes and preference settings.

    After reading dozens of Internet Forum articles on very similar problems seem to many other users, I even deleted all preference setting files in the OS X Finder (a recommendation that has been said to succeed), however, the problem remains.

    Also, I completely deleted the software entirely from my iMac (including all the system and setting files), downloaded the latest version (5.7.1) Adobe, rebooted the system, installed new Lightroom, even restarted again, WITHOUT SUCCESS.

    What could I do? As I can't work at all with Lightroom, I would be very happy to get any help on this issue.

    Best regards

    Thomas.

    If the Destination Panel does not appear.

    You must make the Destination panel displayed on the right side by right-clicking one of the other items Panel (like "file management") and then place a check next to the Destination

  • Hi, I want to get rid of "in search of Babylon" of firefox, I did everything but its always come when I press + for a new page. Please help me...

    Hi, I want to get rid of "in search of Babylon" of firefox, I did everything but its always come when I press + for a new page. Please help me...

    You are welcome.

  • When you use firefox, a new firefox window opened and blocked to continue using firefox unless I have a fine. I can't delete the page or even let him. Any help?

    The new window is "http://block.policehunt.org/?id=d04201572567089f9b464bbb1b065531". It is said in very rough English that they recorded me have access to child pornography and in order to unlock my browser, I have to pay $300 through some point of payment. When I try to close the window, a pop-up asks you, "do you want to leave this page? IF you click Yes, it flashes and repeats the same pop-up over and over.

    The English used in the message indicates it is clearly a fraud... it seems that maybe a virus, even if I have an internet virus scanner.

    Any suggestions how to "selectively" delete this 'blocking' window without having to reset firefox entirely?

    Go ahead and force close Firefox by using the Task Manager.

    CTRL + Shift + Esc > process tab > select firefox.exe > 'End process' button

    Then open the currently active settings Firefox folder by using the search box of the start menu to open this short address:

    %APPDATA%\Mozilla\Firefox\Profiles

    If you see more than one folder, click on in the most recent. If there is only a single folder, click on in this.

    Search for files beginning with sessionstore. Generally, you will find sessionstore.js and sessionstore.bak. If Windows hides file extensions, you can view according to the method described in this article to support: http://support.microsoft.com/kb/865219.

    Rename sessionstore.js to something like sessionstore_bad.js file, so that Firefox does not restore this last series of windows and tabs automatically.

    Leave this window open, and then restart Firefox.

    If you want to reopen some of the pages of the last session, you can use the tips in the following threads for 'mine' the sessionstore_bad.js file to extract the URL:

    Success?

  • run-time error when you try to play new worlds of star trek

    When I try to play new worlds of star trek, I get a runtime error and the game ends.  I tried to put the game as if it was on windows 95, but when I try to play the game then he ask for me to use the original cd, but the original cd is in the cd tray already.  I tried to locate the support of the game website, but I guess that since the game is kind of old they do not support for it more.  Right now I am running the beta of windows 7, but I don't know if it perhaps is the problem or not.  I also searched areas of windows tech support anything on errors, but nothing shows up on my type of runtime error.

    frankster195,
    The game worked on this computer under another operating system?  If you have a Core duo, it may not work on it.  Also try different compatibility modes, not only of Windows 95.  Try all of them - I have heard that some people got to work in NT 4.0 or Windows 2000 mode.  Try searching the Internet using the exact phrase that you put in your header post - you'll find forums for players who might have solutions for you.  Let us know if this helped, or if you still need help.

    Thank you
    Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I remove J2SE Runtime Environment 5.0 update 11. Application of transformation error when you use Add/Remove programs

    Cannot remove J2SE Runtime Environment 5.0 update 11 or Java or Java 2 Runtime Environment SEv1.4.2_6.

    Add/Remove Programs DOES NOT WORK.  Message received when you try to remove programs is, "error application of transformations".

    Java (TM) 6 Update 21 is installed on my computer.

    Please let know us the step by step procedure to remove the old Java programs.  Thank you.

    E-mail address is removed from the privacy *.

    use revo uninstaller

  • When you tap on my new laptop, the cursor jumps around and letters are places in the words entered previously.

    New laptop yesterday. When you type, the cursor jumps back and letters are placed in the words entered previously?

    original title: keyboard probkem

    wendyjjll,
    Thank you for visiting the Microsoft Answers community forum.

    Most likely, the problem is due to the sensitivity of your touchpad.  Whenever you type, your thumb probably affects the touchpad with the cursor to another location where you type.  You can set the sensitivity of your touchpad, or turn off the tapping by going into settings start, Control Panel, mouse and keyboard.  If it is not under that, the manufacturer of the laptop most likely installed custom software to control the touchpad.  Let us know what kind of cell phone, brand and model, and we will be able to help you.

    Thank you

    Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for