Shows HP LaserJet 3330 horizontal lines exactly each 1.5 "when you print a completely blank page

HP LaserJet 3330 shows seven or eight approximately 3.5 "cloudy horizontal lines spaced exactly each 1.5" even when you print a completely white page. This also happens when copy and fax.

There are also 2 very thin vertical lines running down the entire page about in the middle. They are exactly 1 "apart.

However, a scan of a blank page on my computer (not printed) is perfectly clean.

Windows 7. No change or upgrade.

Propbably the toner cartridge, if they are 1.48 "apart that it could be the cylinder in the process of development or the charge roll who are both in the toner cartridge. So a good assumption if you replace the toner cartridge, the problem will disappear. Vertical lines could also be part of this issue.

Tags: HP Printers

Similar Questions

  • Why is my printer HP LaserJet Pro CM1415fnw prints 4 horizontal lines of each color of ink?

    My printer prints 4 horizontal lines of each ink color.  Sometimes it does and sometimes it doesn't.  I tried the recalibration, restart, remove all the cartridges and put in new cartridges.  Nothing works.  What is the drum?  The printer is only 6 months old.

    eswanson,

    This article should cover the problem you are experiencing. Give the steps a shot and let me know if it helps:
    http://goo.GL/KGvSV

    Good luck!

  • HP color laserjet 2605 Error error restart when you print the document

    HP color laserjet 2605 error restart when you print the document, please give me a solution?

    Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

    I hope that the discussion can be useful for each of them, thank you

  • Printer runs a blank page between each printed page.

    I have a HP Photosmart C7280 All in One Printer.  I use Windows 8, whenever I have to print anything, she travels around blank pages before each printed page.  If I print 5 pages, there are 5 white pages also, one between each printed page.  Can you help me?

    Baumer1960
    Thus, Baumer, all other pages is a clean sheet when you print, and it comes from any program you use. Is this fair?
  • HP LaserJet 1536 - gray background when you print pdf files

    MFP HP LaserJet M1536dnf, Windows 7 32 bit

    Data of the 20140123 firmware

    The latest drivers on the official website (HP Universal printing PCL and universal printing PS / 5.8.0)

    When you print from Acrobat Reader pdf files, Adobe Acrobat or FoxIt gray background appears on the paper.  The content of the file is displayed normally. Printing from other sources (Word, Excel, NotePad) is OK

    The problem is resolved. The background is added by some scanners during the analysis of certain types of documents. My HP LaserJet 1536 works great!

  • HP laserjet m277dw: horizontal lines on HP laserjet m277dw

    I have a m277dw HP printer color laser, purchased two weeks ago. After about 10 pages, he began to print horizontal lines 22 and 23 mm. They are better visible on a single color background. Are still visible on the page of demonstration with ball.

    Support couldn't see them on scan I sent by email, but they say it is possible that these lines are ok for this printer (?).

    They are terrible and extremely disappointing, can you confirm that this is a normal operation of the printer?

    I used normal paper and the default settings for printing from my pc. I also sometimes spill toner on a page in different places, sometimes even on the back of the page.

    I tried to clean the drum of imaging with a soft cloth, it helps with spills and also makes lines less visible, but only for a few printed pages next. I also tried to make the calibration and cleaning page, but without success.

    https://www.dropbox.com/s/u4n3y7k67pic6yt/IMG_1426.jpg?DL=0

    https://www.dropbox.com/s/afl549df6cmu23y/IMG_1427.jpg?DL=0

    I see the lines and they are not normal for any laser printer which makes HP.

    I suggest trying some different solid color pages that mix the colors as a green page and perhaps a red page.

    You can also see the problem in print quality pages that have been mentioned by the previous poster.

    You just need to get something where support can see you have a problem and then be insistent that they fix it.

    But let's be practical here, you bought less than two weeks, return it and get another, it's probably only a defective cartridge but you should not have to fight the HP support for service.

    And I want to return and get a refund then buy the replacement. You want a receipt to go with your new printer clean, clean as in with a good date and anything else on this topic.

    If my post is solved your problem and click the accepted as button solution under him.

    In order to thank a Tech for a post click the thumbs up button under the post.

    You can even click on the two keys...

  • After the installation of update ver14.0.1, when you print a page on aweb site, why is that each line of the page to be printed each line on a separate page? !

    Each line in the document is printed on a separate page, IE: ten lines will print 10 separate pages for printing.

    Try of the reset described here:

    http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

    Make sure that you reset all the print preferences.

  • Printing error when you print from the Internet only - HP LaserJet 1022

    HP LaserJet 1022

    Windows 7

    Error message when the impression from the Internet:

    An error has occurred in the script on this page.

    Line: 2126

    Char: 1

    Error: Unexpected call to method or property access

    Code: 0

    URL res://ieframe.cll/preview.js

    What should I do to fix this?   Help!

    You need to just uninstall and reinstall the software and drivers for the printer.

    They may have been corrupted.

  • When you print an email subject line is displayed at the top left, can I change it to my name?

    Changed computers & previously my name appears at the top left when I printed an email. Work in a large office, and all use the same printer, so now when I print an email its not so easy to find.

    Select E-mail
    File > print preview
    a window opens showing email print.

    Click on the "Page Setup" button
    Click on the tab "margins & header/footer".

    Under "headers and footers".
    Click the first drop-down - menu and select "Custom... '
    by default it usually says "Title", which refers to the "subject".
    A small window will open allowing you to "' enter your custom header / footer text '."
    Enter your name and click OK

    The preview window is updated so that you can see the changes.

  • Photo printing, vertical lines when you print multiple images on a page

    I went from iPhoto to Photos. Now I'm having a problem printing (HP Photosmart Premium 309 c) pages with many photos for my annual calendar. Often the picture on the right will have vertical lines. I use PS 14 items.  I did this for years and I am sure that the problem is related to Photos and the fact that my photos are now in the cloud and not on my Mac.

    I recently removed my hard drive iPhoto library - because I don't have enough space on my Air.

    Hello

    Thank you for using communities of Apple Support.

    I understand that whenever you print photos of the Photos on your Mac app, the lines appear in the printed image resulting.  The following steps will help isolate the matter with Photos or the printer itself.  To start, please print one of the photographs from the Photos app to confirm a specific photo translates into lines on the printed copy.  After seeing the photo, please export the original photo of the Photos app on your desktop, open the photo in the preview and then print this photo.

    Export pictures in their original format

    1. Select the photos you want to export.

    2. Choose file > export > export Original unmodified.

    3. Click Export.

    4. Choose where to save the exported photo files and then click Export the originals.

    Please report back with the results of these steps so that we can help you.

    Take care.

  • HP color laserjet 2840 printing and copy blank page

    Hi all

    I have hp color laserjet 2840, printing and copy empty, I change the toner and drum but nothing! any idea?

    Sorry for my bed English

    Thank you

    Try this test.

    Printed page in after you get the blank page open the access door and see if you can move the carrousel by hand.

    If the carousel will rotate the carousel latch is stuck.

    The lock can be fixed by disassembly of the valve and clean some foam sticky residue deteriorated and its replacement by a thin piece of material. I use stickers very thin markers of a dollar store.

  • horizontal lines appear in the photos when printing

    I'm having a problem with printing photos in an indesign document.  When photos, jpeg files, are placed in the document and printed, there are small black lines that travelled horizontally through photos to a half inch.  These lines run through only the photos, not the rest of the document, and they do not appear when the photos are printed separated, and not in an indesign document.  This may be the cause?  Is there a guide that I accidentally put under tension which might be the cause?

    Thanks for any help on this matter.

    What version of InDesign and operating system? InDesign is fully patched?

    Your printer has a dragt mode and it stops in the driver?

  • When you print envelopes LaserJet 401dne

    I have a printer Laserjet 400 401dne replaced my old HP Laserjet 4 p.  Has been able to print envelopes without any problem of Windows XP pro with MS Word 2002.

    Now I can't get the printer to print the envelope without spoiling.  With the settings default to the printer and using the envelope feature, I have selected "manual for Tray 1.  It did not work.  It tray print on a letter-size sheet 2.  Went to the printer, and the type and selected envelope paper size as envelope #10.  Was able to get out of the bin, however, the impression gets compensated because it is somehow the printer still thinks it gets a 8.5 x 11 sheet.  So when the envelope going by for printing, the return address is cut.

    What I'm doing wrong here?  I've never had to change the settings of the printer for the type of front support.  I let the software handle this?  Don't see why they had to do printing envelopes so complicated.

    Hi Repairontheside,

    I suspect that your question it will be better answered in the HP Enterprise business community, like the HP LaserJet Pro 400 series is a business model.

    My technical expertise is with consumer products and software, I'm sure the sales people would be happy to help you if you re - ask your question for them to answer. The HP Enterprise business community is a Forum HP designed for commercial customers and business help each other. I'm sure you'll find some people here HP help also.

    Click here to connect to the trading forum > HP Enterprise Business Community

    Good luck.

  • When you print photos it prints black evey line 1/2 inch on the page

    My Photosmart HP 7510 prints black lines every 1/2 inch on the page when printing pictures what is the solution.  I cleaned the print heads and the print quality and the allignment.  What Miss me?

    Hello

    I would suggest trying a hard reset with the printer.

    Hard Reset:

    Unplug the power cord from the printer and the wall

    Take out the toner cartridges.

    Wait for 30 seconds

    Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

    Replace the toners/cartridges in the printer

    Let me know the results

  • Insertion of the brands exact on a dial when you use arbitrary spacing

    I'm currently add a ramp to my dial, so it gives it the color for a gauge of RPM.  My question is that you must use to perform arbitrary spacing setting color and I was wondering is there a way easier then guess and do a right-click on each post?  Instead somehow enter the number I want like 1000, 2000, 3000,...?

    I think this property node should work.

    Simply fill out the table of cluster with marker values and colors.

Maybe you are looking for