Increase the disk volume

Similar Questions

• Won't start not satellite M300 - system on the disk volume is damaged

  OK on the 1st...
  Today, I turn on my laptop but it just will not start until... stop just at the TOSHIBA LEADING INNOVATION he...
  and the drive light lit upwards or blink.

  After that I tried the several times, it starts.
  When I went into windows, IE opened, it hangs again.
  After a while a black screen with a mouse crusor only...

  I tried to turn it back on it... it comes out the window repair.
  after repair, he says that:
  "the system on the disk volume is damaged."
  'system QuickIN' file is repair.
  but always after some time, the problem came again...

  So I wonder what problem is that and what can I do to solve this problem?
  Is a software or hardware problem?

  Hello

  For me, this looks a bit like a HARD drive problem.
  I guess that HARD drive developed and the hardware error.

  Have you checked if the HARD drive is listed and recognized in the BIOS?
  Do this!

  If the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and must be replaced.

  Even if the HARD drive would be listed in the BIOS, you test another new HARD drive to check if the problem is not related to the failure of HARD drive.

• How to reset the disk volume quota hard C

  Original title: Win XP volume quota

  I'm a partitioning of a HARD drive with win XP service pack 3.

  How reset the disk volume quota hard C, I can not get access to quota controls?

  Size of the disk, it's all the 100 GB, I can see on C is 54 GB. you will need to access the other 50 GB.

  1. What do you mean by "unpartitioning" a disc?  If you mean that you remove some partitions on a physical disk in order to have more space in a remaining partition, you should know that you will not be able to extend the partition system (usually c :)), even if there is unallocated space on the disk unless you use a third-party disk management tool.  Windows XP cannot do with its native tools.

  2. are you sure you really want to use disk quotas?  It would be unusual in their homes.
  2B. which means you that you cannot 'access' to quota controls?  You see the tab "Quota"?  Are you logged on as a user who has privileges?

  3. where are you looking that see you C 54 GB but think you should see 100 GB?

• My laptop says "system on the disk volume is damaged," How can I secure my data?

  I have a Dell Inspiron 1720, which I had for about 5 years now. Recently he lights up and after trying to do the Startup Repair, I found that the system on the Disk Volume is damaged. I can't do anything on the command line because he said my laptop needs to restart whenever I get something. Is there a simple way, I save all of the data on the laptop?

  Hello

  You can remove the hard > put in a USB hard drive case > plug it into another computer > attempt to read data from there.

  Or, you can make a disk bootable operating system "Knoppix".

  It is a single block of working operating system on a disk that uses your machine hardware failures (as long as the damage that you have are NOT appeared to the Dell hardware; hardware must always work)

  http://Knoppix.NET/

  See you soon.

• "Found root system on the disk volume is damaged."

  Hi, have a Dell laptop Inspiron 1720 under Vista. Suddenly the screen turned blue, my wife tells me, and she tried to restart. A message passed very quickly, and she was unable to read. When I tried to restart the screen has come to give the option to start in safe mode, guest, with the network and other options, including to start normally. I tried each of the options, and none worked so I am unabe to run chkdisk or system restore because I can not get the prompt. I used my boot drive and ran the repair, not good ran, it ran and said the system should restart, he did, but windows could not load.

  I ran a few other test with the F2 and F12 keys-drive unit as much as I've been able to say all items being passed. I took the vista disc and tried to do a clean installation, the computer wouldn't complete installation, it just hangs on the system configuration. After running another one of the diagnosis he was one of the tests that gave information

  " Root cause found" "" system on the disk volume is damaged".

  What is this and can I replace the hard drive for this problem?

  Thank you

  Hi Michel S

  Changed the BIOS to ATA and was able to download Vista and put in place. When I set the BIOS to SATA boot computer a blue screen that passes if fast, cant read then stops start towards choosing a nail system, to the system recovery of windows screen then the screen of windows recovery and repeated the same thing each time.

• ESXi 5 - increase the disk space

  Hello

  
  Info:

  Size of the disk hard server: 4 TB

  What are the limits on the increase in size of virtual machine disk space Windows Server? For example, if C: win2k8 is 80 GB, can I increase to say a maximum of 4000 GB (eg. only 1 VM on the host)?

  I get a new server and I would like to give the VMs small readers and increase disk space needed in the future, if necessary. How will I know how much space the augmentable drive by?

  If I start with young readers, does this mean that I won't be able to increase the disk space, as well as virtual machines with more readers?

  Thank you

  Sorry, my bad. The size of the virtual disk does not depend on the HW version, it's just 5.5 ESXi and VMFS5.

  In any case, some words of clarification:

  • You can create virtual disks with up to 16 TB, in c# Client
  • Large virtual disks > 2 TB-512Bytes (with up to 62 to 64 to no) are not officially supported in c# Client, even if this can work for drives <=16TB (see=""> vSphere 5.5 storage improvements part 1: 62 TB VMDK)
  • Note: You cannot manage VMs with HW version 10 in the c# Client.

  André

• Increase the overall Volume of film

  Hi - I have all audio levels fine for my film, and I want to just increase the overall volume of film. How can I do this? I thought I could use the audio mixer - but I put the top slider - but then it goes down again. I'm new so I don't know how everything works again. Thank you

  Yes, Audio Mixer works best as a monitor of audio mixer level, in my opinion.

  It is designed so that you can control the audio level that you play your movie. But this creates a large number of additional keyframes and can be quite messy.

  The method you use - in the line of scene - is probably the easiest way to increase or decrease the volume of an entire track.

  The best way to resolve the audio for individual items in montage mode is to drag the horizontal line that runs through the clamps upwards or downwards. (There are also more advanced methods, including standardization and keyframes, which I cover in my book.)

  But the key is to watch these counters in the Audio Mixer Panel! You don't want to overload your audio (or underload)!

• Increase the disk space

  My C drive has 5% free space. and my drive D "New Volume" 93% of free space. When I right click on drive C 'Player Extend' option is not usable. How can I increase the capacity of the C drive? I tried shrinking the D drive, thinking it would give me the ability that I could use to extend the C drive, but that did not work.

  To extend the Windows partition, free space must be nearby and located at the end of the partition, you need to develop, in this case your Windows partition. Disk management cannot shrnk forward of the partition (the partition next to your Windows partition), if you need a third party utility to boom the beginging of the partition in the Windows aprtition look, then you can extend the Windows partition.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/personal.htm
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• Increase the shared volume Px4 - 300 d

  I have a question.
  
  Declare the shared volume with a size of 4 to and need to expand.
  can do it without losing the current volume information?

  Hello Ricardo-Lenovo,

  Distribution of the volume can be increased without data loss.

• Reference Dell poweredge r530 - increase the disk space

  Hello

  We currently have a Dell Server poweredge R530, with installed 5 hot swappable drives with RAID 5 configured. I need to increase disk space for our virtual machines, bought an x 2 extra 1.2 TB SAS drives to install. What is the correct process to add 2 new readers to the table and increase the space available in the 2012 R2 windows server? Could someone sanity check process below please:

  1. install the 2 new drives while the server is powered and operating normally. (What I have to install 1 player and wait a while, or two disks can be installed directly after the other?)

  2. go in dell iDRAC and confirm the visibility of 2 new readers.

  3. wait until the readers successfully have been added to the State through iDRAC Tracker

  4. go in the management of the storage within the 2012 R2 server to allocate new space for the virtual machine partitions.

  Is more correct? It feels like I'm missing an essential step, it cannot be that simple that it allocate the additional storage space on a live production server?

  Any advice appreciated

  Thank you

  1. the two drives can be added at the same time.

  2 iDRAC is not the best way to do it. Unless this is your only access to the server, use OMSA leave within the OS.

  3. the process is not automatic. Once readers show up in a State of PREPARATION, you will need to go to OMSA, PERC, storage, virtual disks and select Reconfigure in the drop-down list of tasks available for RAID 5. (In fact make the statement reconfigures / expansion was the 'crucial step' you left on your list of ;).))

  4. Yes.

  Are your 1.2 to existing disks SAS drives?

• How can I increase the disk space

  Hello world

  I am new member communities and virtualization technologies.

  In my office, there are 2 esxi servers and they are mirrored with veeam server. All servers to have converted from physical servers to virtual machines using vmware. We have a problem with the exchange servers that there is not enough disk space. Normally I have to turn off the exchange server and type the new value. I need suggestions on these steps.

  Thank you

  You can increase the size of the virtual disk with the virtual machine... Take a look at this blog post for instructions: http://blog.pluralsight.com/resize-vmware-windows-server-drives

• Increase the disk space on a virtual computer which was extracted

  I have my computer running virtual Windows 7 checked. I then checked back in the VM. I need to increase disk space on drive C (the winSxS directory seems to never stop growing). But there is a snapshot on the disc 'View Local Mode of instantaneous anchorage'. What are the consequences of the removal of the snapshot myself in order to increase the size of the disk? Throw this out of sync between my laptop and the virtual computer and require all of ~ 30 GB to download again?

  Hello
  If a replication extracted from a desktop computer, a snapshot of the local desktop is created and then the changes are replicated with the data center.
  If you delete the snapshot, you ensure that you validate the changes.  This force probably allows you to download all of the Office during the next Check-Out operation.

  Best regards

  Patricio Cerda

• How to increase the speaker volume?

  Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?

  On Wednesday, April 10, 2013 23:21:42 + 0000, JRHoot wrote:

  Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?

  Have you set the physical volume on the speakers control
  themselves?

  Ken Blake

• can I use an external hard drive to increase the disk space and memory on xp?

  I am considering an external hard drive of 1 TB to trasmet all files on the computer. There is little hard drive space and memory left. Can I use the external hard drive free space and can it will be installed via USB and use my operating system?

  You can use the external hard drive to transfer your data from your internal hard drive.  Cannot move system files (such as Program Files, Windows and swap files) well.  Looks like your use of the word 'memory' made reference to disk space - it normally refers to which an external drive would not affect RAM.  If you mean disk space, however, you can certainly free SPAC drive this way.

  I hope this helps.  Good luck.

• Increasing the option Volume does not work

  As the title suggests - it starts ringing at the level I put.
  I'm seting ringtone volume up because of its notifications ridiculously low.

  A factory reset fixed it.