My laptop says "system on the disk volume is damaged," How can I secure my data?

Similar Questions

• Won't start not satellite M300 - system on the disk volume is damaged

  OK on the 1st...
  Today, I turn on my laptop but it just will not start until... stop just at the TOSHIBA LEADING INNOVATION he...
  and the drive light lit upwards or blink.

  After that I tried the several times, it starts.
  When I went into windows, IE opened, it hangs again.
  After a while a black screen with a mouse crusor only...

  I tried to turn it back on it... it comes out the window repair.
  after repair, he says that:
  "the system on the disk volume is damaged."
  'system QuickIN' file is repair.
  but always after some time, the problem came again...

  So I wonder what problem is that and what can I do to solve this problem?
  Is a software or hardware problem?

  Hello

  For me, this looks a bit like a HARD drive problem.
  I guess that HARD drive developed and the hardware error.

  Have you checked if the HARD drive is listed and recognized in the BIOS?
  Do this!

  If the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and must be replaced.

  Even if the HARD drive would be listed in the BIOS, you test another new HARD drive to check if the problem is not related to the failure of HARD drive.

• "Found root system on the disk volume is damaged."

  Hi, have a Dell laptop Inspiron 1720 under Vista. Suddenly the screen turned blue, my wife tells me, and she tried to restart. A message passed very quickly, and she was unable to read. When I tried to restart the screen has come to give the option to start in safe mode, guest, with the network and other options, including to start normally. I tried each of the options, and none worked so I am unabe to run chkdisk or system restore because I can not get the prompt. I used my boot drive and ran the repair, not good ran, it ran and said the system should restart, he did, but windows could not load.

  I ran a few other test with the F2 and F12 keys-drive unit as much as I've been able to say all items being passed. I took the vista disc and tried to do a clean installation, the computer wouldn't complete installation, it just hangs on the system configuration. After running another one of the diagnosis he was one of the tests that gave information

  " Root cause found" "" system on the disk volume is damaged".

  What is this and can I replace the hard drive for this problem?

  Thank you

  Hi Michel S

  Changed the BIOS to ATA and was able to download Vista and put in place. When I set the BIOS to SATA boot computer a blue screen that passes if fast, cant read then stops start towards choosing a nail system, to the system recovery of windows screen then the screen of windows recovery and repeated the same thing each time.

• I have a micro cell phone memory card, I'm trying to delete files MPG and it says that the disk is write-protected, how can I disable this?

  I have a micro card.  I used to put photo files.  Today I'm trying to remove them and I get a message that the card is write protected.  How can I disable this?

  I guess you put the micro card in full-size SD card reader? Look on the side of the SD card. There is a small switch that is write protected. Put it to the other position.

• I try to install Smart Notebook and I get a error message saying "could access the location %APPDATA%\ network." How can I fix?

  Thank you

  Check the registry entries referenced in these articles:

  http://support.Microsoft.com/kb/886549

  http://support.Microsoft.com/kb/2258121

• have deleted pc hp printer has changed, but when I turn on pc, it continues to put the disk back in place, how can I stop this

  tried to delete on pgrammes, but does not

  Hi crockett55,

  Not sure if this is your type of printer, but HP has something to help:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-49133-2&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=2511767

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• THE INSTALLATION FILE IS DAMAGED, HOW CAN I DOWNLOAD A TRIAL

  I AM TRYING TO DOWNLOAD A TRIAL VERSION OF DREAMWEAVER AND PHOTOSHOP AND I GET AN INSTALLER IS DAMAGED

  See if download trials from the page linked below works best for you.  Don't forget to follow the very important Instructions, shown on this page.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• I am trying to load XP Pro SP2 as the key on the bottom of the system says xp pro. But during installation it says the key is invalid? How can I fix?

  Invalid product key?

  I have an old laptop that I am donating to a charity.  I try to load XP Pro SP2 above, because the key on the bottom says xp pro.  But during installation it says the key is invalid?  How can I fix?

  It is possible that you will need to a disk with SP3 slipstreamed in there - much SP3 keys are a new slice that has been issued and is not recognized by the previous discs.

  Your machone specifies a level of SP? What is the brand / the exact model?

• How to reset the disk volume quota hard C

  Original title: Win XP volume quota

  I'm a partitioning of a HARD drive with win XP service pack 3.

  How reset the disk volume quota hard C, I can not get access to quota controls?

  Size of the disk, it's all the 100 GB, I can see on C is 54 GB. you will need to access the other 50 GB.

  1. What do you mean by "unpartitioning" a disc?  If you mean that you remove some partitions on a physical disk in order to have more space in a remaining partition, you should know that you will not be able to extend the partition system (usually c :)), even if there is unallocated space on the disk unless you use a third-party disk management tool.  Windows XP cannot do with its native tools.

  2. are you sure you really want to use disk quotas?  It would be unusual in their homes.
  2B. which means you that you cannot 'access' to quota controls?  You see the tab "Quota"?  Are you logged on as a user who has privileges?

  3. where are you looking that see you C 54 GB but think you should see 100 GB?

• The file system on the disk structure is corrupted and unusable. ...

  Dell Optiplex 3010
  WD5000AAKX

  Windows 7 Pro SP1 64 bit

  This is the drive that contains the operating system and was just replaced on 23 July. I restored the disk backups using Acronis True Image 2014.

  From July 25, I started to see

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume of OS utility.

  in the system (Source Ntfs, event ID 55) event log.

  I ran a CHKDSK /R on the disk and it reported no problem with the drive.

  Except for the scary messages in the system event log, I see no problem, but I also don't see these errors on the other disk in the machine.

  [I forgot to mention that the drive passes diagnostics pre-boot]

  What happens here?

  I see nothing in the article in PC Magazine directly addressed the problem. You were talking about the complexity and the possibilities of seriously screw things with True global Image?

  In addition, the link to the Microsoft solution irritates me to 'we're sorry, the requested page is not found.

  However, I think I found the solution, and it is quite related software.

  After scouring the logs of system events and application, I realized that the error I've been see is still bracketed by the subsystem VSS starts and stops and was almost always related to a backup operation or a virus scan.

  Some research (Google search, in fact) have allowed me to suspect that successful shadows of the disc were somewhat corrupt, so I simply deleted them (vssadmin delete shadows / for = c: / all). Since then, there has been no error reported, new instant shade have been created, and everything else works OK.

• What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?

  What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?

  Disconnect, and then try to connect again. Use a different cable.

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• Receive error messages: E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS DAMAGED AND ILLISIBLE and unable to run CHKDSK at startup

  Original title: corrupt master file table pleae help

  Hi all I have a problem I hope that someone can help me with
  first of all, I have a toshiba satellite laptop computer running windows vista.i have 2 drives c: and e:
  c being the main one with windows and e being the backup and where I put a lot of my files, movies, etc.
  IV had no problems atall and then I went to the E drive access yesterday and first had it that no info under the drive icon does say just LOCAL DRIVE E:
  When I click on it I get this message E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE
  I tried to run chkdsk at startup and cmd prompt and I get this message "corrupted master file table.
  cannot recover master file table chkdsk abandoned... " Device Manager sees no problem. Event Viewer, says "the file system on the disk structure is corrupted and unusable. Please run the chkdsk on the E: volume utility. »

  I have a lot of files on the drive I want to lose.can someone give me advice on how to solve this problem, I hope iv gives you all the info you need. Thanks in advance

  Hi helzf,

  You can try to run a Checkdisk on drive E to fix disk errors that can cause this problem. You can make a backup of the data on this drive and try to run checkdisk.

  Check out the link:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Hope this information is useful.

• How can I secure my laptop when I surf the internet via a public router at work?

  How can I secure my laptop when I surf the internet via a public router at work? I mean if I use a router to work and others use too and I use a private laptop! I heard that someone hase the knoladge he can enter my laptop the couscous that he uses the same router I do. you have a special program for that, or is there a place in my computer that I need to enable to avoid the unwanted entries?

  If your Windows is updated and your Windows Firewall is enabled and that you have updated anti-virus, that would be fine. In Windows 7, you must check Action Center in Control Panel to see your security status, if something is wrong that it will show a message in Windows XP and Windows Vista, he calls the center of security.

  They may only enter your laptop or hack, if your firewall is disabled or there is a vulnerability in your system or a Malware would cause of vulnerability, and in all cases to ensure that your Windows updates and anti-virus is running, you are protected.

  Another thing is that if your router requires the password, then choose strong password and change it regularly, if it is public without password or authentication, then you need to careful when visiting Web sites because they could be monitor and publicly display information. Some websites have encryption that in Internet Explorer, it shows as a lock icon pad indicating that your transaction is encrypted and you're safe.

  It depends also wireless encryption in your company that will be in service by admin or SOUND Department if it's WPA2 which is good but for WEP or WPA, you should be very careful. I suggest to discuss this issue with your COMPUTER service too.

• Getting an error of ipconfig Media Disconnect on my laptop. Another laptop in the House works well. How can I remedy I have almost tried everything!

  Getting an error of ipconfig Media Disconnect on my laptop. Another laptop in the House works well.  How can I remedy I have almost tried everything!

  Hi Jess,

  Can we have a look if the network adapter is not disabled. Start-> settings-> Control Panel-> network-> Enable connections and departure-> the settings-> Control Panel-> system-> hardware-> device-> adapters Network Manager. Check if the drivers are installed properly.

  Also give a try to replace the work system network cable connected to this laptop.

  I hope this helps.