Increased dictation does not

I think that I've implemented correctly; increased dictation is downloaded and installed.

However when I use the short cut or the menu command, nothing happens; No popup mic; nothing at all.

Don't know what else to do.

Please launch the Console application in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

The title of the Console window should be all Messages. If it isn't, select

SYSTEM LOG QUERIES ▹ all Messages

in the list of logs on the left. If you don't see this list, select

List of newspapers seen ▹ display

in the menu at the top of the screen bar.

Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

Please don't dump blindly thousands of lines in the journal in this discussion.

Please do not post screenshots of log messages - text poster.

Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

Tags: Mac OS & System Software

Similar Questions

  • Dictation does not

    Dictation has suddenly stopped working. Does not work for texting or doing research. I've been on several fast wifi connections (90mbit +). I turned the security setting siri/dictation/turn off and the keyboard to the dictation option.  I rebooted several times with home + power. Dictation servers are not enabled according to the site. Any suggestions?

    LLA buttons not greyed out. It will start the dictation and I see the activity of display work but when I hit actually it crashes just with a perpetual top. Since this days. Currently on 9.2.1. iPhone 6 128.

    Same thing happened to me in the last days.  Is how it works - bar rises and fluctuates as I speak, but no words are typed in the message. Then the microphone greys out and I can't turn it on again until I got close and go back.  iPhone 5s 9.2.1

  • In the speech recognition dictation does not

    While he was trying to use the dictation in speech recognition, no speech text can't.  Was working fine before.  No change to the system, but has several different restorations using a variety of dates spanning back to the initial installation of Vista.  (It was the 10th time that I had to reinstall the OS since I got this computer...)  I am running Vista Home Premium 32 bit SP2, on a Dell XPS410.  None of the posts I've seen here have worked, but I wonder if anyone else has tried the spoken command "Start typing.  When I do that, it will convert text spoke of the individual letters but still will not recognize whole words, obviously not a very useful thing if you dictate a letter.  Normal order, IE. Start Notepad or grid of mouse or scroll work etc fine, but tempting product just dictation one what was that answer, or it will try to open a program, it thinks I want to.  I had re form this feature for every installation, it gets old.  All my drivers are up to date.  Once I did a fresh install and all updates from microsoft and dell and used the computer for anything, have not installed any third-party software be it, simply left the system power and ran only chkdsk and other utilities MS once a week or two and, voila! from now, the thing is finished installing, he already had errors listed in Event Viewer.  After 3 months of abot, he operated with about 60 percent of its features to work, the non-functional remains.  Does not require any intervention from the user to the first slide on the ultimate BSOD crash, which, as always results in a resettlement, as nobody on the planet can provide much in the way of answers or help.  I use computers and Microsoft products since 1983 on a daily basis and keep waiting and hope something that works as advertised, but already I see problems of the usual kind happening in windows 7.  Typical.   Ah, sorry, lost in a mug shot here.  Any suggestions on the problem of the dictation?

    I'm going to assume that you use a headset microphone any. If so and you are using a laptop with a built-in microphone, go to the sound control panel and disable the built-in microphone so that he is not inadvertently picking your voice as well.

    About the command "start typing", it is intended to allow you to start dictating individual letters as a, b, c, and so on. It is not supposed to be used to capture the General dictation. Before you try to dictate, make sure to disable this mode by saying "stop typing.

    Another good forum for more information of the Windows speech recognition is:

    http://tech.groups.Yahoo.com/group/Ms-speech/

    Good luck!

    -Russ

  • Dictation does not not iMac Elcapitan

    Hello

    I have an iMac where I set the settings to allow dictation. I also checked the internal mic and when you talk about Preferences you can see the icon save correctly the different levels of my voice. However, when I go to double press fn in my application (Pages or Mail) nothing part.

    Any ideas why this might happen?

    Thank you

    David

    Is the small window of mic pop up? To see the words you're talking about enhanced dictation must be enabled.

  • Siri and dictation does not work!

    I need help, when I ask Siri something with location (coffee to find close to me) she always says that she cannot get my location. Help, please.

    I use an iPod touch 6th generation with iOS 9.3.2

    Check if location Services turns on and enabled for Siri, in settings > privacy > location Services.

  • Apple Watch dictated either does not or tape a word at random

    all of a sudden Apple Watch message dictation does not work.  It creates only the audio and I get a message that the dictation has failed, or slap a word at random that I do not dictate.  Emoticons go through

    HI - try the following steps:

    On your iPhone, go to: settings > General > Siri - disable, pause for a few moments, and then reactivate the Siri.

    If it does not immediately help, restart both devices also subsequently. Turn on both devices power off, and then restart your iPhone first.

    -To turn off / restart your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

    -When he is ready to go back, press and hold down the side button until you see the Apple logo.

  • Why is to speak the text doesn't work does not correctly?

    I get a circle turning for a while and no results. He used to work. I have the latest OS 9.2.1. I can see the memory. I have hard reset (home + power on button). I have reset the settings. Nothing helps.

    Hi, PBoesmans.

    Please visit Apple support communities.

    I understand that the option to dictate does not work with Messages on your iPhone 5.  Because force applications to close no has not solved the problem, please go through the troubleshooting steps below.

    Help with Siri

    • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
    • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
    • If Siri is not available or responding to questions, see the next section.

    If Siri is not available, or do not understand or answer questions

    After each step, see if you still need help:

    1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
    2. On your iOS device, make sure that Siri is enabled in settings > general > Siri.
    3. Restart your iPad, iPhone or iPod touch.
    4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
    5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
    6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
    7. Contact Apple support.

    Use Siri on your iPhone, iPad or iPod touch

    See you soon

  • Dictation and Siri does not work on iPhone6

    The dictation and Siri functions on my iPhone 6 do not work. When I try to use them, I am able to push the button of the microphone, but after that, all I can see is a continuous wavy line. Regardless of how quiet is in the bathroom, the wavy line will not disappear and the phone does not hear me. Does anyone have any solutions for this? I tried to reset, software update, turning Siri and dictation and turn it back on.   Is there something that I am missing?

    If you record a memo, voice your voice picked up on this?

  • Satellite A200 does not correctly reduce or increase the volume

    Hello

    Our Satellite A200 is having problems with its Volume control wheel.
    If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
    He jumps rather the volume level in seemingly random directions (with a preference for the volume).
    Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

    BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

    -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
    -Which driver/firmware is attached to the order of the volume control?
    -How can I determine if this is a hardware or software problem?

    Advice would be welcome.

    Stephan

    Hello

    There is no software or hardware problem.
    It is a new generation of volume control.

    First of all there is no mechanical limit turning right or left.
    In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

    By the way;
    > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
    You can change the volume as in the sound settings that could be found in the control panel.
    > Which driver/firmware is attached to the order of the volume control?
    Audio driver controls the volume controller.
    > How can I determine if this is a hardware or software problem?
    There is no problem

  • How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

    How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

    Version OS X?

  • Memory of the computer on the Local C drive does not increase after deleting all the photos and the video.

    On my computer, the operating system is Windows Vista Home Premium. I am facing a problem, in which case, the amount of gigabytes, on the Local C drive.

    does not increase after remove/delete all the photos and video to my computer.

    I've done a disk cleanup.

    Any help will be greatly appreciated.

    Elliott R.

    Hello

    Check if the files that has been deleted and still resident in the trash, if so, empty the trash.

    http://Windows.Microsoft.com/en-us/Windows7/permanently-delete-files-from-the-Recycle-Bin

    Method 1;

    I suggest that you run the System File Checker.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2: Test the issue in a new user account.

    Create a user account

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  • Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

    Re Windows XP: At the opening of the hearts, the window is very small.   How can I increase the window to fill the screen.   Double click on the top panel does not work.

    Hi Rosa,.

    The size of the window for Hearts is actually design in Windows XP.

    However, there is a solution. You can follow these steps:


    Step 1

    a. first of all, copy the game.

    b. click Start, all programs, games.

    c. right-click on the game of hearts .

    d. Select Properties from the list.

    e. press the button find the target on the next window.

    f. right click on the highlighted file and select copy.

    g. then paste the copy on your desktop.

    h. right click on your desktop.

    i. Select Paste from the list.

    Step 2

    Finally, we will change the resolution for the game setting:

    a. right click on the game you just pasted on your desktop.

    b. Select Properties from the list and click the Compatibility tab.

    c. put the check box marked "run in 640 x 480 screen resolution.

    d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

    Hope the helps of information.

  • Removal of documents does not increase the amount of available space (Cruzer facet)

    When I delete files on my drive Cruzer facet Flash to make room for other files, the available space does not increase and so I can't add more files. Everyone knows this? How should I do?

    You use a PC or a Mac? If you use a Mac, you must empty your trash, while the disc is still connected or will not remove the files.

  • microphone does not work with voice-dictation

    Original title:

    MIC problems

    My microphone does not work with voice-dictation in Win Vista. However, it does not work with Sound Recorder?  I went to the Hardwear and Sound but MIC is not yet in speaker properties so I can't make adjustments. Any ideas?

    Hello

    Thank you for joining Microsoft Community!

    The microphone does not work with voice-dictation.

    Quick questions:

    1. What is the brand and model of the computer?
    2 - is a built-in microphone?

    We will follow these steps and check:

    Method 1:

    Select Microphone, a default device.

    Follow these steps to do the same thing:

    (a) right click on the "speaker" icon located on the bottom right corner the screen of the taskbar.

    (b) click on sounds, click on the recording tab.

    (c) click Microphone, and then click Properties. (Note to make sure that this work appears under Microphone. If the job does not appear, click on Microphoneand then click set as default.)

     

    Method 2:

    Check if dictation is enabled or not.

    See the following links for the same:

    Turn on dictation for all programs

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-on-dictation-for-all-programs

    Troubleshoot speech recognition

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-speech-recognition-problems

    I hope that helps!

    If the problem persists, or you need help on Windows please keep us informed.

    We will be happy to help you!

  • Laptop HP 630: computer laptop fan does not increase speed

    I had problems of heating very wrong with my pc it would tend to turn off all the tkme when it overheats, I decided to blow into the fan and dust came out. He continued to work perfectly until last night where he continued to heat up, I checked on the Internet and I found I just had to clean the fan, that's why I opened my laptop this morning and cleaned the fan. But now the fan does not accelerate if the temperature is high before her and make a horrible noise, now the fan is on, but does not change its speed when the cpu heats up! I tried a lot of freeware that increases the speed of the fan but the fan cannot be detected, but the fan is always on and idle. I opened the laptop 3 times to check if everything is connected and they are, but what could be the problem? Please help my laptop is my life right now.

    Yes I used to blow from the outside, it is very help full. I took it to get it fixed but the guy could not fix it, so he said he has tried to change the CPU and RAM, but nothing happened so I gave up. An amd box external hard drive, I bought a Hp Pavilion Dv6 of second hand, I thought my lapt lasy forever, that is that a good model does not only take care of it right. I still have faith in HP products and will soon buy a new laptop for their part again!

Maybe you are looking for

  • Adoption of iWork Suite

    Hello My specs are: My problem is that I spent 20 years using Windows programs and recently converted to Apple products and software, almost exclusively 100%. I am a business owner of IT Support, where I assist businesses and individuals in the creat

  • Launchpad icon missing

    My Launchpad icon disappeared after the installation of a printer.  How can I get that back?

  • Qosmio f10 - 137 boot problems with wireless

    I bought the above my local PC World yesterday. Was to restore the system myself (only the demo model is available, do not have the time to wait for them to restore, so I accepted and ended up with 100 pounds). Anyway, the problem-it hangs during sta

  • BSOD on all options after starting windows updates running.

    I ran the windows updates last night I shut down my computer.  I remember it being about 12 updates to run. Windows Vista, 32-bit This morning, I rebooted my computer and during the loading sequence, updates continue (the non-graphical part) and then

  • Can't open a PDF document: error related to the "data execution prevention".

    original title: data execution prevention I have a pdf file, I use to get in but can not now because of the prevention of execution of data and can not turn off because I don't know the name of the file