Incredibly slow import after the installation of 2015.3.  Everyone knows a similar problem?

Similar Questions

• Photoshop missing in the object model viewer (ExtendScript ToolKit CC) after the installation of 2015 CC

  After you have installed Adobe Photoshop CC 2015 (32-bit) on Windows 7, entries for Photoshop in the object model viewer (OMV) were missing.

  I checked a few properties before the update to 2015 CC - so I'm 100% sure that Photoshop was in the list just before the update.

  How to make the entries in the Photoshop object model in the list (I have a 2 or 3 versions, but they have all disappeared from the list when installing CC2015)?

  

  Thank you

  Andreas

  Attached is the required omv.xml file for Photoshop CC 2015. Here are the steps to install manually. I will work with our team of the installer for this in future versions of Photoshop CC 2015.

  On mac is the folder "/ Library/Application Support/Adobe/script dictionaries CC /" and on windows, it's probably "C:\Program Files (x 86) \Common Files\Adobe\Scripting CC\ dictionaries.

  On the use of the mac Finder to go-> go to folder and make sure you are in the library of the system and NOT the user library.

  If you have a photoshop file keep it, it's probably an older version as CC 2014.

  Make a folder "Photoshop" 2015

  Drop the omv.xml in there and restart the ESTK.

• Tecra Z50-A-11 q - slow start after the installation of Win 8.1

  Today, I installed Windows 8.1 CD. Also, I followed the instructions and had a old BIOS in the UEFI.
  The installation has been successful, but now the BIOS starts slowly. After almost a minute to look at the Toshiba logo, Windows 8 starts.

  I can't find the solution.
  There is one thing that is strange: I see several partitions on the hard disk, in the following order:
  1.00 GB (OK, recovery partition)
  100 MB (EFI system partition)
  455,46 NTFS
  9.08 GB (OK, recovery partition)

  Help or advice welcome.

  Thanks & greetings
  Maurice

  Solved, because after installing updates Windows 196 he starts suddenly fast. (VERY fast)

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Sound stops and slows down after the installation of Microsoft Vista SP2

  Its malfunction after installing Microsoft Visa SP2

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  Here's a thread on these forums on how to fix this: http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/f16247af-313a-418d-915e-6403012c25eb

• Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  Since El Capitan update that I can't use my secondary monitor as a full screen preview on the first and after the effect CC 2015

  I also have this problem. I was told that it is a bug, they work.

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• My CC of LR 2015 stops right, "do not answer", after the installation of windows 10. What should I do?

  My CC of LR 2015 stops right, "do not answer", after the installation of windows 10. What should I do?

  This means that a problem with the graphics card.

  You update your graphics card drivers?

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Satellite P100-119 - software after the installation of recovery

  I use a Toshiba Satellite P100-119 since 2006. I want to run the original liveries Product Recovery CD after you back up all my data, so that with a vacuum system, the laptop gets even faster.

  But as there were pre-installed software (office, Toshiba programms) when I bought it, I don't know if they went after the recovery. I do not have CD for these programs, they were just pre-installed and what my Windows xp, should recover fully with the cd?

  Hey Buddy,

  After the installation of recovery, you have the same settings that bought the laptop. With other words recovery disk will restore the box settings.

  Firstly the recovery disk will wipe the entire HARD drive and remove all. After this Windows will be installed all the drivers and tools. In addition, will be also installed software preinstalled such as office, etc. and you can use it again. :)

  Backup all important data like the photo, music, etc. but everything will be removed for a clean install of Windows.

• Patches of Toshiba Service Station closes after starting after the installation of 3

  Hello

  We recently have a "patch day" Toshiba Service station. I think from my memory that the patches are released earlier, but I installed them on April 23, 2010. There are three patches, and so that I can restore from the system recovery, it was:

  -Flashing of BIOS
  -Patch HDD/SSD Alert
  -HDD Recovery patch.

  So, not to mention that I had problems to make the flashing patch BIOS to run, finally extracting installation files to another location and run it with administrator rights.

  My problem is that after this session of patch, my Toshiba Service Station no longer starts. When I start my system, after recording on it seems to start upward but always farm then again with windows say error report 'stopped working' and that's it. I'm not sure patch who this could be. I also believe that one of these Islands said in the description that it will update station itself? I downloaded Service Station on the Toshiba site but it will not prove at best, does not matter if I uninstall it, before you start the installation with administrator rights or not.

  My system is Satellite A500, Windows 7 64 bit.

  I hope you can help. Unless I can't access the updates anymore!

  Note: A few days before I installed a graphic driver for my Nvidia GT 230 m SINCE THE SITE WEB of NVIDIA. Why am I? I've lived literally all HOURS a unwanted system reboot and I see in the problem report it was always because of the graphic driver. Subsequently, I installed the two patches from the site of Toshiba, the elders and the most recent, but the problem persisted. Fortunately, a few days I have recheched the Nvidia site and there was a new driver.

  Although he said BEFORE (not now anymore) that this graphics card should be based on a driver manufacturer, I installed it but because he Coulnd't ' t get worse. The positive thing is that I didn't have a single far system crash even if I leave the phone turned on for hours.

  I'm not sure if the problem with the gas station started right after the installation of the graphics driver, but it can't be because I installed the three patches mentioned above, through gas station, a few days later.

  But he seemed to have affected the software after these patches? I'm not sure.

  Hello

  Simply said; Toshiba Service Station breaks down and new installation of this tool didn't help.
  Right?

  Well, because you are not sure what s wrong and depending on the assignment, you have other problems with the software, I recommend to recover the laptop using the recovery of HARD drive option!
  This will outline the laptop to factory settings.

  Of course, you must back up the data if you have important files.

  Run recovery disc HARD and after that check how the laptop would serve!

• After the installation of Sierra, websites follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  After the installation of Sierra, Web sites started to follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  What are your privacy settings in Safari preferences.

  

• Computers on the local network does not show up after the installation of macOS Sierra

  Shared on my LAN Macs make their appearance is more after the installation of macOS Sierra. See the attached servers is checked in the preferences of the Finder and the computers appear in the list of DHCP clients on the router. I can see these computers to each other. Sharing is disabled on the computer of the Sierra. Any ideas?

  Thank you!

  p.s. I can not even 'go' to the IP address of these computers.

  Correction: I can afp: / and vnc: / to IP addresses (and so far as a temporary solution, I assigned permanent IP addresses in the router on all computers on the local network). Once I afp: on a local computer, it appears on the side bar of the Finder under shared devices, well I saw several times it appears and then disappears. Nothing has changed on the network since the installation of Sierra.

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• can not start after the installation of 10 Windows via bootcamp OSX

  Hello, I need help.

  I tried to install 10 Windows via bootcamp, and I did it successfully with no problems. However, after the installation, I restarted my computer, hold down the option key and tried to boot into OS X, but it won't work. It would be a symbol that boot lead me to windows 10!

  all solutions? I do not have a backup of my files under OSX, I lose my files?

  NOTE: when I formatted the partition for windows, he said not bootcamp next to him, but it is clear that the partition that I had to format, it is the same size that I decided to make Windows when I was in bootcamp in OSX + it was empty at 100%.

  UPDATE 1: so I managed to get into the recovery of the internet and deleted the partition that had the windows and install OSX Marverix instead (temporarily) also, I fixed the hard drive MACINTOSH HD, but now I can't boot it at all when I press the option button during the priming of the mac. all solutions?