Similar Questions

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

• I'm looking for the fill in function. I sign up for a lot of gifts and have to put in all my information.

  I am trying to find something that will be put in my information automatically, for example name, address, telephone number, etc... I sign up for a lot of gifts and have to put in all my information to get. I wish I had something that could put in my info by a simple click.
  Thank you in advance,
  Scott French

  You can do a search for form fill extensions.

  • AutoFill Forms: https://addons.mozilla.org/firefox/addon/autofill-forms/
  • AutoFill: https://addons.mozilla.org/firefox/addon/autofill-262804/

• Time Machine breaks down during the work week, working all weekend after preferences rebuilt

  End of 2013 the MacBook Pro 13 "Retina display, 16 gig RAM, OS x 10.10.5, gigabit networks are home and work, NAS at home only.

  MacBook is used as working on simple business network machine all week. Time Machine off and save a couple hundred K and then crashes when I connect to home network at night. Same thing happens when I return to the home network for the weekend. I have disable TM, kill the TM preferences, restart to create new ones, back up on my home network NAS all weekend without problem. I turned off TM before going to work on Monday and back at home Friday night, and it fails. If the routine is now restore preferences TM Friday night, let the backup of its contents all weekend, turn off TM and go to work all week.

  I would like to have the security of offline backup that comes with the TM run all the time.

  It was suggested elsewhere to rebuild the Spotlight database. It did not work. I use locate on the command line and have rebuilt the database too.

  Any suggestions?

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• InDesign CS6 breaks down and used to start after reboot - iMac

  Hello

  I have a strange problem that began in the last two weeks. If I restart or reboot my iMac my indesign will not open again. He's trying to start open ("loading image" appears and icon bounces in the dock) but always fails and gives an error subsequently each time (I will attach).

  What I've done so far, it's the usual removal of the preferences, replace the default file and restart the machine again, but nothing works.

  The only thing I can do to get it working again is to reinstall indesign from the disk (design & web premium). All of the other Creative Suite applications don't need to reinstall and work very well.

  If anyone else has had this problem and if so how they solve this problem as its bit of a pain to have to reinstall indesign after each reboot.

  
  

  It had been updated for the latest version on CS6 several times (after each re-install).

  The only way I could get the shutdown problem was to re - install Creative Suite in a new user account on the Mac, not the ideal way to make it work again, but at least I don't need to worry if the user stops their machine.

• Firefox 5 breaks down and restoration of session does not load tabs that have been previously opened.

  Also, if I get out Firefox 5 it is more requested confirm that I wish to close several tabs - even if this option is checked in the folder. Have changed the different settings in all: config but nothing helped. Any ideas gratefully received...

  Session restore

  https://support.Mozilla.com/en-us/KB/session%20Restore

  Check and tell if its working.

• Dell Vostro 430 sometimes breaks down and does not find the hard drive in the bios

  So I have this old - ish Dell Vostro 430, intel cpu, windows 7 hard disk sata 250 GB, 4 GB of ram.

  Update BIOS to the latest version 2.4.0

  In certain exceptional circumstances, this PC sometimes crashes in windows, it is restarted, and then when he comes back it does not find the hard drive as a gift. He is not seen in the bios and does not start.

  To fix, I have to unplug the power cable, wait a few seconds, plug in, reboot the computer and it starts normally, load windows and everything.

  So far, I have tried to paginate on another hard disk, reinstall the Windows operating system from scratch, and same thing happens from time to time.

  It is difficult to find the cause of the problem, because this happens very rarely.

  Sometimes, when the pc is turned on for the first time in the morning, the hard drive is not found by the bios and we reappear at the same trick (disconnect the power cable) to take him back.

  When it crashes when using inside Windows, it seems that the reason is the computer can't find the hard drive.

  Such computer is out of warranty.

  It would be nice to just throw this computer because it is still fine for the work it has to do, + I have Windows and Office OEM license on it, as well as many other software that I have to reinstall etc.etc.

  No idea what I could troubleshoot?

  Maybe change the motherboard? How can I buy a new motherboard for an out of warranty Dell?

  While possibly keeping all the OEM licenses (Windows 7 and Office 2007).

  Desu

  .. .once in a while...

  That will make hard to resolve this situation.

  • Have you tried to replace the battery in the motherboard, if nothing else than to exclude it? CR2032, 3-volt lithium-ion, ~ $2 at discount stores. Do not forget to open the BIOS Setup and copy down all current settings first because remove battery BIOS resets the default values, which is maybe not correct for your specific system.
  • Have you tried another SATA data cable, or reinstall the existing at both ends?
  • Have you reinstall RAM and PCI card in their slots?
  • Have you used canned air to blow out the dust?
  • Maybe a power supply problem... ? If insufficient voltage, he could not start the HARD drive quite fast at startup, or quick enough after your option settings to be able to turn the HARD drive off when it is not accessed, what may cause this error message 'not found '.
  • If you use a power strip or surge protector, have you deleted and the PC connected directly to a wall jack?

  If it is a motherboard defective and you replace it with another jury of Vostro 430, you shouldn't have any problems with Windows or Office licenses. Assuming you are using Windows Dell reinstall for exact same version of Windows drive that was installed at the factory, it should not even ask the product key, if you must reinstall Windows on the HARD drive. But even if she asks, there should be a sticker somewhere on the PC with your unique product key so you can enter if the installer made the request.

  and make sure you have the Office product key too...

• Then, Firefox crashes when I try to reopen, I get a message saying that it is already open and must be closed. It is not open and I can't shut it down and have to restart. It is very annoying, as often happens.

  Firefox closes unexpectedly so when I try to open it I get a message saying that it is already open and I first need to close. I can't find it anywhere open and then I have to restart to open Firefox again.

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs
  • Firefox crashes or does not - how to fix

  See also:

  • http://KB.mozillazine.org/Firefox_crashes

• Help! After you open a .psd in illustrator, he breaks down and is no longer able to open .psds.

  I have a photoshop document that is a few coats of the same image that contain different amounts of "threshold" applied, which what color do differently "Posterize" style image multilayer.

  I've done this before and it worked fine, no problem.  Today, after that, everything was fine, I used the trace of image [that I have in previous iterations of this technique] on the top layer and it was good, worked perfectly, then the 2nd layer, which returns an error message something like "this operation cannot be completed, reason: cannot. When "ok" is clicked, all the Illustrator crashes. If I try and open the exact same psd which was normally open in illustrator, it returns the error "file is not readable. I could make the psd a CMYK document and then opened he tried again, the process more and it came with the same mistakes every time.

  I recorded the 2nd attempt if that might help to understand what happens [please excuse my * drawings haha] why - YouTube

  I think it's called layer "dark", which causes the error. I'll try to figure out why - currently, I think it might be the border being too detailed [but I have a record of the whole image, where the border has been drawn very well...] But this does not mean that I can use this border to the image if I can find a way to open the psd again.

  Help, please

  I have "fixed" the question of the Illustrator completely reinstall.

  No idea on how to really solve this problem, or even if someone else has it.

• Latest IOS Revel day breaks down and will not be installed

  I've been using v 2.3.1 Revel - 548 on iPhone 5 and iPad 3 no problem. An update has been published today (June 29) and it will not be installed and blocks the application on both devices, so I had to go back to the old version. Does anyone else have this problem?

  Steve

  Hi Steve, this is Mike from the Revel team.  We are aware of the problem and we are studying the cause and a solution as soon as POSSIBLE.  Thank you for your patience because look us into this.

• When are you going to fix this shit work, constant breaks down and freezing, slow loading, slow navigation?

  Web browsing, while another program is running is darn almost impossible. It took me two minutes just to type this message.

  I solved the problem, download and install browser 'Opera', transferred account info and bookmarks, works perfectly, no crashes, no stands, just the speed. Much better browser, for those who still have problems.

• A few minutes after HDMI connection my Satellite breaks down and restart

  Dear people of good day,

  I hope you can help me.

  My new laptop perfectly transfers the signal HDMI audio/video. However, after 3-10 minutes the following occurs:
  The laptop screen is almost entirely black. It remains strange pixelated horizontal stripes on the screen of the laptop. The TV screen has in which a fixed image. In addition, a buzz is coming during this process.
  Then the computer restarts, so is completely black and the HDMI signals transmission is interrupted.

  There is no difference is I use laptop on the power cord or try it on battery power.

  The laptop from my friend (different model, but also Windows 8) works correctly with the same TV and the same new HDMI cable.

  I hope someone can help me with this problem. Thank you in advance.
  If it is a warranty case I return again.

  Message was edited: assignment has been translated

  It is not easy to explain what the problem is here.
  I recommend you reinstall your laptop with version and function test of original Windows with the "settings" again. Do not install anything either and do not change the standard configuration. Just test it.

  If the problem persists I would recommend you to contact your reseller or Toshiba service provider directly.

• How an application can be kept to continue working after a host down, and hav has its effection?

  After you have configured hav, to test it, stop the host, the virtual machine can restart on another host. but the application is unable to continue to work.csn for example, watch movie online can't keep continue, he should revive in the manual. How can he do continue to operate automatically.

  I believe that other applications such as SQL server or Exchange server must restart with restart the VM OS, right?

  Thank you.

  George

  Hello

  You can try with tolerance to failures.

  Best wishes / Saludos

  -

• Adobe InDesign CS5.5 breaks down, update failed

  InDesign crashes on my system. I tried to update, but the update failed with the following message is displayed:

  Dreamweaver CS5 11.0.4 Updater

  Failed installation. Error code: U44M1P7

  
  

  Extend Script Toolkit 3.5.1 update

  Failed installation. Error code: U44M1P7

  All tips for me?
  

  Check this. http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

• Player Windows Embedded 10.1.2 breaks down using the typewriter tool

  Since 10.1.2 drive my typewriter tool documents do not work correctly in an integrated Adobe Reader window, for example in Firefox or Internet Explorer.

  Open the first file to http://www.ld-didactic.de/software/1.pdf shows the typewriter as usual tool window.

  Open the second file to http://www.ld-didactic.de/software/2.pdf does not display the typewriter tool window more.

  Also, the first new opening document will not display the typewriter again tool window. Instead the player often crashes while loading several documents of typewriter or by closing the built-in player.

  I tested it with Adobe Reader 10.1.2 in Firefox and Internet Explorer on Windows Vista and Windows 7 x 64 systems. He has worked with Adobe Reader 10.1.1.

  Can anyone reproduce this problem?

  Michael

  This issue seems to be fixed with Adobe Reader 10.1.3.

  Thank you