A few minutes after HDMI connection my Satellite breaks down and restart
Dear people of good day,
I hope you can help me.
My new laptop perfectly transfers the signal HDMI audio/video. However, after 3-10 minutes the following occurs:
The laptop screen is almost entirely black. It remains strange pixelated horizontal stripes on the screen of the laptop. The TV screen has in which a fixed image. In addition, a buzz is coming during this process.
Then the computer restarts, so is completely black and the HDMI signals transmission is interrupted.
There is no difference is I use laptop on the power cord or try it on battery power.
The laptop from my friend (different model, but also Windows 8) works correctly with the same TV and the same new HDMI cable.
I hope someone can help me with this problem. Thank you in advance.
If it is a warranty case I return again.
Message was edited: assignment has been translated
It is not easy to explain what the problem is here.
I recommend you reinstall your laptop with version and function test of original Windows with the "settings" again. Do not install anything either and do not change the standard configuration. Just test it.
If the problem persists I would recommend you to contact your reseller or Toshiba service provider directly.
Tags: Toshiba
Similar Questions
-
MSN keeps disconnecting a few minutes after I connect.
original title: Logout MSNMy guard msn disconnect me every few minutes, I connect to msn and start chat from my contacts, then it just logs out me automatically and told me to press a button saying connect. This has happened for almost a week now. It works pretty well when I'm at home, but not when I'm at the office and my office colleagues don't know this error. Y at - it something wrong with my profile. Appreciate your help. Thank you.
Hello
Given that the problem is related to Windows live messenger, I suggest you to post the question in the forums and check them off below if it helps:
http://windowslivehelp.com/forums.aspx?ProductID=2
It will be useful.
-
Lightroom 6 still does not respond after a certain number of shut downs and restarts
I used lightroom6 on a computer laptop windows 10 a few months with no problems. The last two days, I'm not able to launch the application after you stop and restart the computer. Windows Task Manager says that he does not.
Any suggestions?
I have the original CD but currently away from home and not be able to uninstall and reinstall.
any help is appreciated.
Windows Task Manager says that he does not.
If Lightroom opens upward, disable the use of the GPU in Lightrroom.Uncheck 'Use the graphics processor' preferences > Performance.
In addition, please ensure that you use the latest version of Lightroom.
Refer to keep updating Lightroom to download the latest version 6.3
I have the original CD but currently away from home and not be able to uninstall and reinstall.
Re installation is not necessary, but you can still use the Photoshop Lightroom Installer direct download link
Kind regards
Assani
-
Satellite C650 USB - Ports off a few minutes after the start of every day
When I start my C650 Satellite for the first time every day the USB ports work perfectly, then after a few minutes, that you hear the-, they stop working and features of disappear of display devices & Printers.
Reboot during the day makes no difference but the next day to the first commissioning of the USB ports working again. I think that every day they work a little longer, but I have not yet proved.
Anyone got any ideas?
You already posted in this thread.
http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=73552Therefore, it would be interesting to know how USB ports work after that USB controllers was removed and installed again. The comments appreciated.
In addition, you can disable the option that allows to disable USB ports in order to save power. This can be done in-USB Controllers-> properties > Device Manager - > last tab (power management)
-
Satellite Pro P300 restarts a few minutes after the stop
Hello
I'm unable to download the update of the BIOS for a Toshiba Satellite Pro P300 PSPCDE (WIN 3.00), the reason being that I wonder a user name and password to download the file!
The laptop has this annoying problem to revive a few minutes after the laptop has stopped, and that's why I want to update the BIOS to see if it suits him. Laptop is running XP Pro (downgraded from Vista).
Ideas how I can get the update of the BIOS and will it solve the strange rebooting problem?
Paul
Where are you trying to download the BIOS?
I always download my updates on the official website of Toshiba and if it doesn't work maybe you should wait a day.
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversTo be honest, I doubt that the BIOS update will solve this problem. I often read about this problem and you can solve if you disable the wake on LAN function in the BIOS and Windows (properties of the wireless network card).
Check it! -
I've just implemented a new M201nw of the LaserJet Pro and it works fine, except for a problem with the printer with ePrint.
I could implement Web Services on the printer and add it to as an ePrint, connected HP printer. Thanks to ePrint and Google Cloud Print printing for a few minutes after you have turned on the printer.
But after a while, that can last from 3 to 10 minutes, the printer appears as "offline" in connected HP. If I check the settings ePrint to the printer through the front LCD or the web interface, for "ePrint Server Status", one of two things happening: sometimes there's just busy, or after a few seconds, I see "connection error. Check the Internet connection. »
When I see the error message, I ask 'Tour ePrint temporarily turned off.' The printer will reconnect ePrint and work for a few minutes again.
Local networking features of the printer such as network printing and web interface do not seem to have any problems.
I don't think that the problem is related to my internet connection, which is reliable. I can monitor the traffic on my network and see communication between servers, XMPP from HP ePrint and the printer when the printer is working normally. When the printer has this problem, I still see the traffic coming in from HP but no traffic coming out of the printer. It's very strange and suggests part of the firmware of the printer does not work properly.
Anyone else had problems with this printer model?
Finally, I have determined the cause of the problem. While doing a follow-up, I discovered a router not authorized on the network itself advertising via the Protocol RIP (Routing Information) emissions. It seems that his presence finally confused the printer to know where to send the traffic. After turning off the emissions from the router, the ePrint feature, now works well.
-
Laptop will not load web pages for a few minutes after sleep
HP M6-1045dx, Windows HP 64, SP1
After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.
I've tried to follow several times:
Disabled/enabled wireless adapter
Wireless adapter uninstalled/reinstalled software both links to HP and Intel.
Did a clean install of the operating system.
I sit within eight feet from my wireless router. Another laptop connects instantly to sleep with no isses.
Thank you.
Download and install the latest Intel Wireless driver
Intel Wireless Driver version 15.2.0.19
I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.
-
Could not open the MS Sites
My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access. Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...Hello
Please let me know if:
1. you are able to access other Web sites, or the question appear with only Microsoft based sites?
All other websites work well. problem only in trying to gain access to www.microsoft.com
2. What is the operating system that is installed?
Windows XP Pro.
3. are you aware of the physical RAM installed?
1 GB
4 and it meets the minimum requirements of the browser you are using?
For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.
Provide answers to the following questions.
a. also mention the name of the operating system that you use.
Windows XP Pro
(b) is there an error message that is displayed when the site no longer works?
trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.
c. What is the browser you are using?
Tried it on IE, mozilla and chrome.
I tried to change the size of the memory virtual and also changed to the size of the managed system.
formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.
tried to change the physical memory.
Tried with different browsers.
at the top does not a little luck. :(
Method 1: Please visit the following link to change the size of virtual memory
Change the size of virtual memory
http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory
Method 2:
See the following links
http://support.Microsoft.com/kb/967897
WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
After a Windows updated 12/09/2009 from my computer stopped working. It starts (without error) and then freeze a few minutes after loading Windows.
I removed all the updates of Windows since mid-November, but this has not fixed the problem. I also tried to boot to the last known successful configuration and has followed the procedures of "clean boot upward" found elsewhere on this forum. None of these actions resulted in necessary corrections.
Any other ideas?
Hi lizseh,
Welcome to Microsoft Answers Forums.
I suggest you to restore the system to a previous state where it was working fine and check.
To restore the operating system to an earlier point in time, follow these steps:
1. click on start toreduce this includes this image, type System Restore in the Search box, and then click System Restore in the programs list. Collapse this includes this image
2. If you are prompted for an administrator password or a confirmation, type your password or click continue.
3. in the System Restore dialog box, click choose a different restore point, and then click Next.
4. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
5. click on Finish.
The computer restarts and system files and settings are back to the State they were in when the restore point was created.
For more information, please visit the link below,
http://support.Microsoft.com/kb/936212
Hope this information helped you.
Kind regards
Arona - Microsoft technical support engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
When I connect my Toshiba L300D laptop to my Samsung 40 inch lcd tv using vga to vga connection it works fine for a few minutes. Then the screens on the laptop and the TV start to turn on and turn off, also jumps around cursor. Can someone tell me what is the problem and how to correct.
Hello
Try changing the VGA cables and check if it helps.
If the problem persists, then I suggest you to update the firmware.
Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
-
BSOD a few minutes after starting. And another after entering IE.
Wake up BSOD a few minutes after starting. Then I start and it's OK. Then when I go into IE I get a new one. Then, everything is OK for a long time (often for the rest of the day). Trouble started when I downloaded Firefox, while IE was found to have a big security problem. Download problems. Tried to go back to the previous state good. Still getting BSOD. Then I backed up all personal files, reinstalled windows 3 times! Still no luck. Updates seem to work. I have no material on it, more just printer, keyboard, mouse and speakers. Something about a Bad pool caller and something on a manually initiated crash appear to be the most common BSOD. Anyway, I don't understand all this. I tried to talk with Microsoft technical support, but they could not help and indicate that it could be the hard drive itself.
Someone at - it look at my https://onedrive.live.com/?cid=7C2BA0B8D210B559&id=7C2BA0B8D210B559%21105 minidump file
And I would like to know if this is something that I can fix it or do I have to take the whole thing in a shop for repair.
Thank you!!!
Linda
Hi Linda,.
BAD_POOL_CALLER (c2)
This indicates that the current thread is doing a bad pool request.
4: kd > k
Call child-SP RetAddr site
fffff880 '03bf5928 fffff800' 031f2be9 nt! KeBugCheckEx
fffff880'03bf5930 fffff880'01015431 nt! ExDeferredFreePool + 0 x 1201
fffff880 '03bf59e0 00000000' 00028000 excsd + 0xa431
fffff880 '03bf59e8 00000000' 642 d 0 x 28000 0000
fffff880'03bf59f0 fffffa80 1006475 c 0x642d0000
fffff880 '03bf59f8 00000000' 00000000 0xfffffa80 1006475 cexcsd.sys (Diskeeper - ExpressCache) is tempted to rescue the pool which was previously already released.
Uninstall ExpressCache as soon as possible.
Kind regards
Patrick
-
After the connection to my computer today and to go to Youtube, I get this error message on my screen.
The assertion failed!
Program:...
File: common\npn_gate.ccp
Online: 267Expression: pPluginShim
I try to press abandonment and try again but nothing happen.
Hi Shadwik,
Thanks for the reply.
I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
After that my PC works fine. -
Jin
Sometimes, my keyboard stops responding, despite the checkist troubleshooting.
Then it works again after I have shut down and restart my mac!
is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...
What else could be?
I just replace the keyboard with a new one, but the problem persists.
my mac has also been in mac repair and they found nothing wrong.
Thank you!
Please run and view a report of EtreCheck http://etrecheck.com/
-
After the upgrade to Windows 8.1, I have to enter my password, if I click on the 'Rainbow' at RPM screen and moving toward my office after I shut down and restart by pressing the power switch.
However, if I click on the power icon and select [Restart], the rebstarts 15 t on the desktop (I want!).
I ran "netplwiz" and all options offered, but none of them ignore the display of password to the power on - so frustrating!
H-E-L-P
BobO'B
Hello
Hope the following video helps:
https://www.YouTube.com/watch?v=-VOlZl7UmwQ
Kind regards.
-
New computer falls a few minutes after connecting to the Internet.
When I firstl newspaper in my internet computer will work fine, but after a few minutes, I get the dns server does not. How can I fix? My computer is new, I have troubleshooted my internet connection and all right?
original title: WHY do I GET the SERVER DNS DOES NOT WHEN browsing WEB sites? HOW CAN I FIX?
Hello Jackie,.
· What is the operating system installed on the computer?
Check to see if the following is useful.
Method 1: Rinse and save DNS.
a. Click Start. Click Run, type cmd. Press ENTER.
b. at the command prompt, type the following command and press ENTER. It will display the message properly emptied the cache of DNS resolution.
ipconfig/flushdns (there is a space between ipconfig and /)c. at the command prompt, type the following command and press ENTER:
ipconfig/registerdns (there is a space between ipconfig and /)Method 2: Release and renew the IP address by following these steps.
a. Click Start. Click Run, type cmd. Press ENTER.
b. at the command prompt, type the following command and press ENTER
ipconfig/release
ipconfig / renew
Now check the issue.
Maybe you are looking for
-
When you play Farmville, I get the warning that I'm leaving a non-secure secure website. This warning is very irritating and seems to interfere with messages from Farmville. How to disable this warning?
-
Satellite C650D - is slow on dial-up connection
The only thing that I downloaded on the computer is Microsoft Word and I set up an email for my daughter (it is his birthday present!) we're on dial-up, so I know it will be slow but crikey, it's ridiculous. My own desktop computer Windows XP (2and a
-
Is a solution for January 1, 1970 in the iphone?
Some maliciuos colleague told me that tha change my date and restarting my iphone updates a new iOS..., there a solution?
-
I noticed recently that my speakers do not work, but when I plug in my headphones I can hear everything. I could use some help to solve this problem, thank you!
-
Hello I do an app in Cascades (Momentics C + c++ / QML) who, when a button is pressed, play a selected sound effect in a menu drop-down. For this I need a volume control slider to set the volume of the media unit, as in the app volume control slider