InDesign doesn't let Me not open Image files instead in my Document?

Similar Questions

• InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  This happens with a particular .eps file or many .eps files?

  • The EPS files from Illustrator? What parameters are used when files are saved?
  • Also this happens for all files created in Illustrator EPS (even one you create brand new, with just a few text and simple work in it).
  • Where are stored the EPS files that you place in InDesign?  If there is a form of corruption of files on the hard drive? (Maybe need repair file permissions?).
  • If you work on a network: can the files when they are saved as EPS files on your hard drive?

  CARI

• I can not open zip files!

  I had this problem since day 1.  Whenever I get a zip file, Vista will not open the file instead, he associated with Internet Explorer and sends the computer into a loop of windows which can only be stopped by stopping turn signals.  If I associate the file with any other program, it opens not and goves me a message that the content is unreadable.  I do not get an option to "extract files".

  Help!

  Bschum

  Go to: http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to the ZIP entry and click or double-click on it to launch the association of Zip files repair.  Then restart.  Zip files should now behave as usual.  You will still be able to use 7 - Zip instead of Vista if that is your choice.  All you have to do is change the file association by default for the ZIP files to 7-ZIP inntead of Vista.

  If you have this problem withall the speed of your program, Diecut for entry EXE click or double-ICCT top to run the EXE file association repair.  This should solve the problem of all programs to open under internet explore (if that is the case - I'm not sure I quite understand your situation).

  If the programs are open OK but the problem is that all the icons are all the internet Explorer icons, then perform a rebuild of the cache icon as follows:http://www.vistax64.com/tutorials/117229-icon-cache-rebuild.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the camera Sony a6000.  However, it does not open images in camera raw.  What can I do?

  I downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the camera Sony a6000.  However, it does not open images in camera raw.  What can I do?

  I suggest you please update Camera Raw 9.1.1: Camera Raw of Adobe Photoshop CC and CS6 Installer

  Once done, launch Photoshop and click Help > about plug-in > Camera Raw.

  And check the version of Camera Raw, you see there, it should be the most recent.

• I want to create an ad 480 px by 60 px - InDesign doesn't let me.

  I want to create an ad 480 px by 60 px - InDesign doesn't let me. What should I do?

  If you add the margins left and right (or top and), they add up to 72 px. The size of your ad is only 60 px high. This is why there is an error.

• Error "could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  How do I solve this problem

  "Could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

  It turns out that a Windows computer has been infected by a virus that worked its way to the server. We zapped the virus and restore the backup files.

• InDesign CS5 do not open CS4 files

  (I work on a Mac Pro Quad - Core Intel Xeon 2.26 GHz). I've upgraded to CS5 last week and ran into a problem with InDesign does not open some files CS4. It does not at all ID CS4 files and I don't see a common factor that tells me why InDesign CS5 opens some and not others. I can always open in CS4 and they are not locked. I made sure that no one else had it open also. The error I get is the following.

  Cannot open the document "filename". You may not have permission or the document can be opened already.

  I opened the range of information in the finder and the files are not locked and permissions are appropriate. I tried to save the file to my desktop, and still save on the server and it does not want to open it in CS5. These files are shared, we have a file naming convention and storage limited review, trying to find a work around if it is not a fix for this problem.

  Any suggestion would be appreciated.

  WARNING: For a long time Mac user... I know very little except how to connect networks.

  We have implemented in order to connect to our server in the window (from our Macs) via AppleTalk and Samba. We have looked in using Samba on several occaisions, but continue to flow upward with reasons we should not / cannot use only of Samba. Sometimes, if we have a permissions problem with connecting via AppleTalk, we can connect to the same server via Samba and do not have the same permissions issues. We are also limited to files with 24 characters in the file name when write us a file on the server using AppleTalk. I have not found a limit when writing to a file on the server, when it is connected via Samba. (I tested a 100 characters in length file name and didn't see a need to go higher.)

  We have just updated our computers for CS5 to test and found the same problem with not being able to open most files from the server. We can copy the file on our hard drive, work on it, save it, then copy it to the server. But if I connect server via Samba, I can work on the file without any problems. From what I read above, I guess than that, still, has something to do with the number of characters in the file name. I'm not advising all start using Samba - less long-term. (Once again, we did some research and found several reasons we still use AppleTalk.) But it could be a temp fix for some of you, if this is possible on your networks.

  I would also add that the temporary file generated by CS4 had a tilde at the beginning of the name. The temporary files generated by CS5 have a slash and a tilde at the beginning of the name. We had not this problem in CS4 work since Windows Server at all. The slash can be the death blow.

• By pressing 'o' in review mini bridge mode is not opening the file in Photoshop

  New user of Photoshop here and going through the basics.

  When you use the view Mode in mini bridge I can scroll the images using the right/left arrows open the head image in Camera Raw using the 'R' key, and pressing on the 'o' key does not open the file in Photoshop, I knew that it was supposed to. Am I missing something obvious?  By pressing the 'o' key doesn't do anything.

  With the help of Photoshop CS6.

  Thanks for the tips!

  -Daniel

  Gene,

  Unfortunately, this did not turn.

  I have exactly the same problem on two systems, two Windows 7 based charge installs CS6 and Lightroom 4.

  Spent a good support of 45 minutes on the phone with Adobe and they are scratching their heads as well.  Now it seems that the revision in mini bridge would be a great way to open the files that you want to use, but in reality it does not work.  The tech that I do business with Adobe is to have exactly the same problem as well.

  Not quite ready for prime time...

  D

• Could not open the file on the computers hard drive Windows

  Let's first if I'm in the wrong place, I'm sorry if I'm not at the speed that the rest of you try a point of view, I'm not an expert in computers, in any case, my problem is that Google will not launch task bar or in the browser. I ran chkdsk a couple of times and still nothing, but in my action center it says "Windows could not open a file on your hard drive of computers 3 times, last on 17/08/2014 16:58 go online to the troubleshooting steps" when I view the message details he said that the solution can not be downloaded. Most likely causes: the problem report for this solution has been deleted or changed on this computer and the East is no longer available any help would be greatly appreciated

  I just did a clean boot and it seemed to fix my problem with the launch of chrome, so if someone has the same problem and then perform a clean boot

• 25541 error could not open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, 2147024786 system error... what kind of error is it?

  25541 error could not open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, 2147024786 system error... what kind of error is it?

  I had tried... .but not possible... someone has this problem soluton...

  Prom KrishnaNyaupane Hello,

  Please check the TechNet link below for a proposed solution.
  http://social.technet.Microsoft.com/forums/en-us/officesetupdeploy/thread/86787c69-5909-4885-843e-b8b977e5cc33

  Let us know if it helps.

  Marilyn

• Where can I get help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly d

  Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.

  Hi brionp43071032,

  Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files

  Let us know if you still experience the problem.

  Kind regards

  Meenakshi

• ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora ORA-15001

  ASM, database version: 11.2.0.3

  Get error in the two alert logfile of ASM in cluster with two nodes below.

  ============

  Errors in the /u02/diag/asm/+asm/+ASM1/trace/+ASM1_ora_86521.trc file:

  ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora

  ORA-15001: diskgroup 'M0347_DG1' does not exist or is not mounted

  Same thing is written to the trace file as well.

  There is that a single database that p0347 runs and diskgroup that m0347_dg1 has been for other databases M0347 which is interrupted both diskgroup m0347_dg1 was abandoned.

  But why is it looking for spfilem0347.ora, please let me know how to fix.

  ORA-17503: ksfdopn:2 could not open the file +M0347_DG1/m0347/spfilem0347.ora

  P0347 database has nothing to do with the question. right?

  Probally you have not deleted from database M0347 of OCR and CRS was trying to start the database.

  $ORACLE_HOME of database using

  $ srvctl config database-d M0347

  If it is saved in OCR you should remove it.

  This command will delete the database.

  $ srvctl remove the d M0347 database

  Make sure Diskgroup is registered.

  With the help of GI $ORACLE_HOME

  $ srvctl config diskgroup g M0347

  If registered in OCR you can remove it.

  $ srvctl remove diskgroup g M0347

• Power error: could not open the file exists

  This weekend a partition containing my virtual machines VMWare has been accidentally deleted by the Acronis backup software
  I have rebuilt the partition and re-assigned the same drive letter.
  Then I restored the 'Virtual Machines' from my backup folder.
  Now when I run VMPlayer and start my virtual machine I get the following error:

  Power error: could not open the file 'H:\Virtual Machines\Windows\XP Professional\Windoes XP Professional.vmdk': the system cannot find the specified file.

  The directory search I find the file with the name and the correct directory path.
  Some attributes (readonly, hidden, etc.) are on.
  I am logged in as administrator.

  Is there some other files/directories should I have also restored?
  Suggestions?

  "" According to the newspaper files of the virtual machine has a 40 GB virtual disk consisting of 21 files Windows XP Professional - s001.vmdk '-Windows XP Professional - s021.vmdk. However, the screenshot shows only 5 of these files hard! Please check if you can recover the missing files.

  André

• Do not open the file .xlsx 'reason '.

  Try to open a file .xlsx, I've got the announcement that it could not open the file due to "some reason" ("created reden" in Dutch)

  What the reason is, however, is not mentioned. There is something special with this file?

  The file is a file .xlsx from a bookseller in line line in the Netherlands, with a list of books that I have offered online (like Amazon)

  Cannot guess what "reason" may be, but I suggest you try to open it with Apache, OpenOffice or LibreOffice, both available for download at no cost. (Donations are requested, however.)

  Kind regards

  Barry

• Satellite U300 PSU3DA: error: could not open the file attribute execution of concept maps

  I have a PSU3DA-U300 which I changed from Vista to XP.
  This is because my main computer use will be for navigation (boat) and I was told that most navigation programs will work better with XP. I have almost nothing on my laptop so far, and the system already seems to be slow and freezing too often.

  My question is now on the program of concept maps which I just installed and which does not open. He repeats to me "Eorror: could not open the file attribute.

  What does that mean? I uninstall and reinstall the program, and he comes back with this message.
  I had a glance at the Device Manager, and the only thing that seems incorrect is the PCI memory controller.
  I did a bit of research on this and it seems that this driver is not required for XP? Is this true?

  Would this be a cause of C-Maps program does not?

  Thanks in advance.

  > I did a bit of research on this and it seems that this driver is not required for XP? Is this true?
  Where did you read this info?
  I put t know if the driver is not required, but you get all the drivers on the Toshiba site.

  For your problem with concept maps, I think that it is best to contact you that support the conceptual maps. Here, this is a forum for Toshiba laptops.