InDesign point and click incompatible

Similar Questions

• Need help with the exchange of rooms in my point and click game

  OK, I'll do my first point and click on the flash game to familiarize myself with some databases.

  I set up a room with a walls (rooms) 2 for the moment and on the first picture there is 4 screws which, when clicked play a small animation and are then removed, works great so far.  But if I leave this room and go back inside the screws are back in their original position.  How can I prevent this from happening, I guess I put an if formula somewhere on my addChild (TLscrew) or put it somewhere else, somewhere else in the enter_frame function.  Anyway here is my code, any help would be appreciated.

  import flash.events.MouseEvent;
  import flash.events.Event;
  import flash.display.MovieClip;

  Stop();

  myWords.addEventListener (MouseEvent.CLICK, plain text);
  doorHandle.addEventListener (MouseEvent.CLICK, losehandle);
  doorBit.addEventListener (MouseEvent.CLICK, turnDoorBit);
  tele.addEventListener (MouseEvent.CLICK, turnOnTele);
  skyremote.addEventListener (MouseEvent.CLICK, gotoRemoteBack);

  
  addEventListener (Event.ENTER_FRAME, loop);

  var TLScrew:MovieClip = new screw();
  var TRScrew:MovieClip = new screw();
  var BLScrew:MovieClip = new screw();
  var BRScrew:MovieClip = new screw();
  var topBattery:MovieClip = new AABattery();
  var bottomBattery:MovieClip = new AABattery();
  var remoteHand:MovieClip = new Hand();
  var TLout:Boolean = false;
  var trout: Boolean = false;
  var BLout:Boolean = false;
  var browse: Boolean = false;
  var doorBitStraight:Boolean = true;
  var teleSwitchedOn:Boolean = false;
  var beenToOtherRoom:Boolean = false;

  TLScrew.addEventListener (MouseEvent.CLICK, screwout1);
  TRScrew.addEventListener (MouseEvent.CLICK, screwout2);
  BLScrew.addEventListener (MouseEvent.CLICK, screwout3);
  BRScrew.addEventListener (MouseEvent.CLICK, screwout4);
  
  function loop(e:Event):void {}
  
  tele.buttonMode = true;
  TLScrew.buttonMode = true;
  TRScrew.buttonMode = true;
  BLScrew.buttonMode = true;
  BRScrew.buttonMode = true;
  doorHandle.buttonMode = true;
  
  addChild (TLScrew);
  TLScrew.x = 258;
  TLScrew.y = 205,1;
  
  addChild (TRScrew);
  TRScrew.x = 268;
  TRScrew.y = 205,1;
  
  addChild (BRScrew);
  BRScrew.x = 268;
  BRScrew.y = 230,35
  
  addChild (BLScrew);
  BLScrew.x = 258;
  BLScrew.y = 230,35;
  
  if(TLScrew.currentFrame == 24) {}
  removeChild (TLScrew);
  }
  if(TRScrew.currentFrame == 24) {}
  removeChild (TRScrew);
  }
  if(BLScrew.currentFrame == 24) {}
  removeChild (BLScrew);
  }
  if(BRScrew.currentFrame == 24) {}
  removeChild (BRScrew);
  }

  }
  function losehandle(e:MouseEvent):void {}
  myWords.text = 'handle fell. "
  doorHandle.gotoAndPlay (2);
  doorHandle.removeEventListener (MouseEvent.CLICK, losehandle);
  }

  function turnDoorBit(e:MouseEvent):void {}
  If (TLout == true & & trout == true & & BYuT == true & & browse == true & & doorBitStraight == true) {}
  doorBit.rotation = 75;
  doorBitStraight = false;
  }
  Else if (TLout == true & & trout == true & & BYuT == true & & browse == true & & doorBitStraight == false) {}
  doorBit.rotation = 360;
  doorBitStraight = true;
  }
  }

  function gotoRemoteBack(e:MouseEvent):void {}
  gotoAndStop (2);
  addChild (topBattery);
  addChild (bottomBattery);
  addChild (remoteHand);
  topBattery.x = 174.8;
  topBattery.y = 134.75.
  bottomBattery.x = 127.8;
  bottomBattery.y = 192,8;
  bottomBattery.rotation = 180;
  remoteHand.x = 360.3;
  remoteHand.y = 143.75;
  arrowBack.addEventListener (MouseEvent.CLICK, gotoMain);
  beenToOtherRoom = true;
  }

  function gotoMain(e:MouseEvent):void {}
  removeChild (topBattery);
  removeChild (bottomBattery);
  removeChild (remoteHand);
  gotoAndStop (1);
  
  }

  
  function turnOnTele(e:MouseEvent):void {}
  if(teleSwitchedOn == false) {}
  tele.gotoAndStop (2);
  teleSwitchedOn = true;
  } else if(teleSwitchedOn == true) {}
  tele.gotoAndStop (1);
  teleSwitchedOn = false;
  }
  }

  function cleartext(e:MouseEvent):void {}
  myWords.text = "";
  }

  
  function screwout1(e:MouseEvent):void {}
  TLScrew.gotoAndPlay (2);
  TLout = true;
  
  }

  function screwout2(e:MouseEvent):void {}
  TRScrew.gotoAndPlay (2);
  Trout = true;
  }

  function screwout3(e:MouseEvent):void {}
  BLScrew.gotoAndPlay (2);
  BYuT = true;
  }

  function screwout4(e:MouseEvent):void {}
  BRScrew.gotoAndPlay (2);
  Browse = true;
  }

  
  

  Instead of having this code to remove them, you can try to let them withdraw.  In the last picture (24) within each mc live, try to use...

  MovieClip (parent) .removeChild (this);

• By choosing a layer with point and click

  When I used to use Photoshop 6 I could point to a picture of layers to select it. So if I had 20 layers past with lots of complicated things to select the layer that I wanted to work on I would just click in the main window on something in this layer. I could then go straight to working on that layer or begin to move. Now, I have Photoshop CS 8, this technique does not work so I have to play with the palette of layers trying to isolate that I want to work on. Does anyone know how to turn on the feature that I used to use in the 6?

  You can also take command-shift while clicking on the image. Any layer with non-transparent pixels in the place will appear in the drop-down context menu. Use command to temporarily disable the automatic selection Doug speak. This can be useful when you have two layers stacked on top of each other and you want to move there.

• Why spyware attacking my Web page when I point and click on my mouse?

  When I enter a web address, instead of the address that I ask you, there are a few crazy advertisement showing.  How to get this to stop?

  Hi Plummer,

  Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

• The mouse pointer stuck in mode full screen, but works for bearings and clicking on boxes

  Using win7 x 64, when I get full screen of a game (wow) mode, I lose the use of mouse pointer (its icon is stuck, but I can't gess it runs from bearings and clicking any key).

  Also, if I use another game with win7 x 64 (Flight Simulator) everything works. So, without blaming win7 in itself, I suspect a problem of compatibility between the client of the game and also the video card driver.

  Since everything is updated, my only hope is that you can suggest something, the mouse settings, settings, anything which might help as a workaround. Thank you, ricardo

  Found the workaround from another thread in battle.net, and I reported it here:

  http://EU.battle.NET/wow/en/forum/topic/975220040

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• I had my settings the way I liked them. Enjoying a first orientation, then contrast, then I think the shadows, etc.. I accidentally clicked another point, and I can't go back to these settings, ideas?

  I had my settings the way I liked, and click on another point by accident and can't get back to where I was...

  Control or right click on one of the headings on the right panel. Make sure that this basis is selected.

• When connecting on MacMini, password is auto-complete with a myriad of points and is not the right password

  When connecting on MacMini after I click on the user, the password field is auto-complete with a myriad of points and is not the right password.

  There suddenly / maybe after the most recent update 2015-008, which I installed it on 8 January 2016.

  I need to delete points, usually I can remove them by double clicking on it and pressing the delete key, but they will not simply remove by clicking in the field and using the delete key, as would be normal. Sometimes it takes a few tries to remove the points, and then I can connect.

  Does my keyboard or a virus, my usb port, the update of security or something else...?

  I use this computer without problem for a few years.

  Thank you, Kathy

  osX version 10.9.5 processor 2.3 GHz intel core 17

  First try another KB

  Next

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• The search in a table 2d-coordinates for the point of click

  I'm doing a VI that creates a layer of 2d points on an image imported (as pictured). These points are generated by a Subvi, which simply draws points over and over again (based on the 3 selections of initial angle). All the coordinates of the points are stored in a data feed that is sent to a registry change for other future functions. Each coordinate corresponds to an electrode, labeled 0-255, goes into the lines first (although that could change, but I guess it would be easy to change). Labels are created through 2 loops (as seen in diagram 1).

  I would now like to click on a particular point and put it out in a different color, but also an indicator show me what electrode I clicked. I seem to be at a loss on how to do it! I need explore a table 2d-2 groups of the element, where she looks for the line first, then the corresponding column (or vice versa, it is not serious, but just for ease of understanding, let's say she is looking X first, where the columns first) and compare them to 2 elements (the mouse click coordinates).

  Here's what I've done so far. I need to search for the function in the following way; If find X, look no further columns and select that particular column where the X was found and begins to look for the values Y and and then stops when the value of Y is. Once the two values are found, take these out of the loops and throw them in a cluster and the function of drawing lots.

  Thank you!

  p.s. in case anyone is wondering why I have the function "in the range" in there, it's so that the user does not have to be exact pixel this allows the user to click within 2 pixels of the coordinate of the point.

  Hi Daniel!

  What do you think of this approach?

  

  We subtract just the mouse coordinates in the coordinated range 2D (Array stores the coordinates of the points on the image), the absolute value and look for the minimum. X and y the selected point index is returned in minutes or the index. You can replicate the fuction "in range" by ensuring min value is not too high.

  With regard to:

  Andrew Valko

  NOR Hungary

• I am trying system restore and it says I have no restore points and will not let me create restore points

  help I am trying system restore and it says I have no restore points and will not let me create restore points
  * original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.

  Hello

  1. what exactly happens when you try to create a system restore point?

  2. you receive an error message when you create system restore point?

  3. what operating system is installed on the computer?

  In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.

  Method 1:

  Step 1:

  Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.

  To check the service

  (a) click Start

  (b) in the start search box type Services

  (c) click on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Shadow copy volume started Automatic\Manual

  Step 2:

  Also check the dependency services that are required for the System Restore Service run.

  To verify that double-click the service, and click the Dependencies tab.

  This service must be started before the restore point is created automatically or manually.

   

  Method 2:

  Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.

  Follow the articles given below to change the settings for the firewall and security software settings

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note:

  If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.

   

• Error installing updates "insert microsoft XP Professional disk and click ok.

  original title: "insert the microsoft XP Professional disk and click ok.

  When I try to install my windows xp updates, I get the message "insert the microsoft XP Professional disk and click ok. If I had this drive, it's long since disappeared. Is there another way I can get my updates?

  Hi Nick ev.

  Follow the steps in this document to complete a system restore. This process will restore your computer to a previous point without affecting your personal information. If you have recently installed software or updates, and you select a restore point before installation, the software and updates will have to be resettled.

• Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive. Can you help me?

  Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive.  Can you help me?

  Hello

  Thanks for posting in the Microsoft Community.

  I don't know it must be frustrating!

  Let us try these steps and see if that fixes the problem:

  (a) press Windows + R keys to open search Run

  (b) type regedit , and then click ok

  go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  c) on the right, click it, click permissions

  (d) click on ADD and type everyone and click ok

  (e) now click on all

  (f) below, you have permissions for users, select full control and click ok

  g keys) press Windows + R to open Run Search

  (h) type services.msc , and then click ok

  (i) double-click base filtering engine service.

  (j) Make sure that the service status is started and the startup type is automatic

  (k) the procedure for the windows firewall service

  (l) click on apply and Ok.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information:

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope the helps of information. We know if you need help. We will be happy to help you.

• I looked under system restore points and the earlier it had was on March 27, which was still after that I got problems

  Good so my computer has some corrupted files... I looked under the system (Yes, including the section 5 days ago) restore points, and the earlier it had was on March 27, which was still after that I got problems... I want a later date... Help, please.

  Hello

  If there is no previous restore points until 27 March, including even more that 5 days more then they just do not exist

  and you can not do something which

  Follow these steps instead:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Jumping mouse pointer and Vista "busy circle" using WMP

  When I plug in a "memory stick" SanDisk, WMP trying to 'sync', 'something something '.  The mouse pointer and the Vista 'busy circle' jumping around.  I disabled the auto-start, I deleted the box "Start synchronization when the device connects" and I tried all the options in Sync Center.  WMP recognizes the different sizes of "memory sticks" and each is full.  Sometimes, the "memory sticks" shows in the library list.  I ended up the sync on a partnership, but this command is grayed out on the other.  The side "edit" of WMP sometimes shows the "memory stick" he said here drag the items to synchronize.  Sometimes the side "edit" of WMP says "connect the device.  Once in about 50 tries, WMP actually synchronize with the "memory stick".  I use the memory sticks for data transfer and storage only.  I NEVER want anything to synchronize!  I'm from the old (old, old, old read) school, so if I want something copied, I will use the copy command.  I've seen similar problems here and tried the solutions provided, unfortunately, nothing seems to work.  HELP PLEASE!
  TYVM!

  After the cohabitation on maybe 10 different forums, I came across an apparent solution.
  Apparently, the "guilty" is the Portable device enumerator Service.
  When I disabled it, my problems went away.

  Follow this step to turn off the service.

  1. click Start and type services.msc in the start search box and press on enter.

  2. scroll through the list and select the service.

  3. right click on the service and choose the Propertiesoption.

  4. you can change the Startup type to disable or the status of the service to stop.

  Good luck to all!
  Ed

• Microsoft enhanced Point and print compatibility driver printer driver is not installed on this computer

  We are running Windows 7 Enterprise 64-bit (using VMware View 6.1) virtual work stations and the connection of users to a printer Xerox 4 Type driver/file being hosted on a Windows R2 server in 2012. The driver on the server is listed as "Xerox WorkCentre 7970 V4 PCL6" and when the user of Windows 7 connects the driver appears as "Microsoft enhanced driver compatibility point and print. In the "Print Management" client Win7, it appears as the 6.3.9600.17415 version

  The Printer works fine during their Windows session, they disconnect you and when they connect in the print queue is still there but when you right click and go to "Printer properties", he throws the following error

  "The printer driver ' improved point and print compatibility Microsoft driver" is not installed on this computer. " Some printer properties will be unavailable, unless you install the printer driver. You want to install the driver now? »

  Deleting the queue and then add it again resolves the problem for Windows session, you're.

  Note: we use Persona management of VMware to save data from the user profile of the disconnections from the virtual offices are non-persistent. I've been able to reproduce this in Windows 7 using a virtual office, I can't reproduce it on my physical Windows 7 machine.

  We get around this by using Group Policy and a vbs script to delete the queue on logoff, then another script to add back on logon, but it's just a band-aid.

  In addition, a Type 3 driver works fine in all of disconnections but we need the Type 4 driver in this case.

  Hello Brian,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.