InDesign shows the possible division for a Word?

Similar Questions

• My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  Don't know what you mean by vertically but it is normal that the  watch to display the time briefly when removed from the charger. If the  Watch is held horizontally with the number key of Crown and side on top can be turned. This is normal and is the point of view of bedside table.

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  t-4-2

• Showing the letters highlighted for the keyboard navigation in vista ultimate.

  How display the letters highlighted for the keyboard navigation in Vista view ultimate permanently as you could in XP pro, (display properties - effects - uncheck to hide a letter underlined for the keyboard navigation up to what the alt key).

  In vista, you can show them with the ALT but that works only for the top pull down for menus not on the right button of the mouse popup menus.

  Hi 3DPC27,

  Welcome to Microsoft Answers Forums.

  By pressing the keys corresponding to the letters highlighted in the menus, commands, or options dialog box, you can quickly select options using the keyboard rather that the mouse. If they are not already displayed, you can choose to show the letters highlighted for the keyboard navigation and input (rectangles dotted around objects) indicators to navigate in Windows, generally with the ALT, TAB, or arrow keys.

  Note access keys and keyboard shortcuts
  http://www.Microsoft.com/enable/training/windowsvista/accesskeys.aspx

  You can adjust these settings on the brand the easier to use page in the accessibility of the keyboard.

  1. open the brand of the keyboard easier to use page by clicking the Start button, clicking Control Panel, on ease of access, clicking Ease of Access Center, and then click make the keyboard easier to use.

  Facilitate the use of the keyboard
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-keyboard-easier-to-use

  Make your computer easier to use
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-your-computer-easier-to-use

  Transcript to make the keyboard easier to use demo
  http://www.Microsoft.com/enable/demos/windowsvista/trans_keyboard.aspx

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to show the multiple declaration for an application

  How to show the multiple declaration for an application

  Thanks for your suggestions...

  Looking at the javadocs you can only save an indicator by application. You will need to do three separate applications and package them as an If you want three different indicators to be visible at a time. Or change the flag that (or which group) of the indicators you want to display.

• Windows Live Mail send any emails. "Your server has terminated suddenly the connection. The possible causes for this include server problems. »

  original title: live mail not sending

  My windows live mail 7 stopped sending a reason any.  It has worked very well.  It receives mail ok.

  Whenever I try to send an email I get the following error

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Topic 'task on cognition.
  Server: 'smtp.tiscali.co.uk '.
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  Any help appreciated.

  It can be something as simple as turning off email in your anti-virus program that is unnecessary and can cause this. However, if it does not, ask the experts in this forum. Here, few people use this e-mail program.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them.

  CC 2015 shows the updates available for the creation and Media Encoder, but fails to download/install them. Generated the log shows "ERROR: DS015: cannot read the target of the symbolic link to the file source (...)" at the end.

  What am I supposed to do?

  Thank you, Carlo Romano

  Finally, what worked for me was to completely uninstall and reinstall both apps until 2015 for CC.

  Thanks a lot for the quick reply anyway.

  Carlo

• Problem with the mixer Volume of Windows: no longer shows the green bars for the application

  Hi all!
  Sorry for my bad English, but it is not my mother language: s
  I have a PC with Windows Vista Ultimate SP2 x 32 with this issue: the volume mixer show me the green bar (indicating the volume level) for the speakers and not for other applications like windows media player, for example.
  Perhaps this screen explains more: http://img11.imageshack.us/img11/4538/immaginevfo.jpg
  I hope someone can help me (if someone understands how I speak English: S)

  Thanks, TheDarkTrainer

  Hi TheDarkTrainer,

  Thanks for posting your question on the Forums of Windows Vista.

  I need more information to help you better.

  1. What is the brand and model of the card its installed on the computer?

  2 - is the first time you encounter the problem?

  For single channel sound cards, you will only be able to see the green bar for Master Volume control and not for other applications such as Windows Media Player.

  Controls on other applications are given to control the volume of the special request regarding the Master Volume control.

  For example, if you scroll the bar to set the Master Volume to 100% and then play a music file in Windows Media Player. You can try to open the mixer Volume and increase/decrease the volume for Windows Media Player, you will notice that the master control will set the green bar accordingly and don't let not the green bar to cross the bar of the Windows Media Player.

  If you disable the control Volume for Windows Media Player, it will automatically make the green bar will disappear from the Master Volume control.

  However, if you have several applications running on the machine at the same time and using the sound card, you can try to change the levels on different controls to see the effect.

  With several cards his channel as sound blasters, it would be possible to see the green bar on individual applications also.

  Hope the information will help. Please post back and we do know

  Thank you & best regards
  Ashish Gupta - Microsoft Support

  ===================================
  Calm sea never make skillful sailors!

• HP Pavilion dv7 / LM00EA #UUW: upgrade of the possible SSD for my Pavilion dv7?

  Hello

  I want to upgrade my computers hardrive portable SSD-Drive. It says on my laptop service guide that only intel based model supports on the ssd drive. However, my flag has AMD Turion. Anyone would confirm, weather, I can upgrade the HDD-> SSD?

  In addition, if the upgrade is possible, can I install the current HARD disk drive in the second location on hard disk? If so, are there needed additional cables/adapters.

  I tried to find this info on the HP partsurfer, but no luck.

  Any help much appreciated...

  News of the laptop:

  HP Pavilion dv7 / LM00EA #UUW

  Kind regards

  Jarno

  jhuuskonen wrote:

  and the number of products. It's actually3EA #UUW (zero, zero) LM00. Sorry, my bad.

  Hello

  Much better now. The following link shows the specifications of your machine:

  http://support.HP.com/au-en/document/c02776731

  It's a HP Pavilion dv7-6010eo. Currently it has 500 GB SATA (7200 RPM), you can switch to the SSD. You can also put a second HDD of your machine, but you need to caddy and connector. Please visit the following link:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info & products_id = 379

  Kind regards.

• New computer, transfer of hard drives... How can I access the files executable for MS Word or, more importantly, Visual Studio 2012?

  I had an old computer get taken out by a storm. I managed to save to computer hard drives and installed them in a new computer. I can see my programs MS Word, PowerPoint, etc. and Visual Studio 2012. The problem I have is to find the executables for these programs so that I can actually use them. Is there a work around or do I still have to pay for them? VS is a pro version and more than 2K last I checked! Am I missing just the files in a folder, that I don't see? I seem to be able to find the files exc for other programs. (Rosetta Stone)

  Really, I don't want to buy these programs and will probably go to another (more accessible) suite of software, if necessary. I can write the code in other IDEs and use another desktop software which ensures the compatibility of the MS products if that's the case.
  Thank you for your time and understanding,
  HH

  You cannot run programs from the old hard disk, they must be reinstalled on the new installation of Windows computers.

  Apart from the home folder for Office who would be in the Program Files folder, directory on the original drive Setup performs a number of other things. It will make hundreds of changes to the registry, install many libraries and sign them and put some files in the Windows directory itself.

  Also, if the version of Office that was on the old computer came with the PC, it's more likely to be an OEM license. As such, it cannot be installed or run on the new computer as a limitation of the original end user license agreement.

• What are the possible values for APP_COMPONENT_TYPE?

  The possible values of APP_COMPONENT_TYPE documented anywhere?

  Also, I want to ask all the components in my APEX application. My current query of multiple views unions APEX (apex_application_page_items, apex_application_page_buttons, apex_application_page_regions,...)-a point of view by each component type. Is there a better way to list components?

  Thank you

  -Kris

  Select * from APEX_APPLICATION_ALL_AUTH

  View:	APEX_APPLICATION_ALL_AUTH
  Description:	All the authorisation schemes for all components of the Application

  Column Name Comments WORKSPACE Model authorization workspace WORKSPACE_DISPLAY_NAME Full name of the workspace APPLICATION_ID Number of request of authorization Scheme APPLICATION_NAME Name of the schema to request authorization PAGE_ID ID of Page authorization regime COMPONENT_TYPE APEX authorization schema component type NAME OF THE COMPONENT Name of the component system APEX authorization AUTHORIZATION_SCHEME Name of schema authorization STATUS Situation of authorisation system

  See http://eberapp.com/pls/apex/f?p=447:1301:35096966318357:CLEAR_SORT:RP, 1301:P1301_VIEW:APEX_APPLICATION_ALL_AUTH

• A workflow that lists all the possible values for VirtualMachineGuestOsIdentifier

  I want to set up a workflow that will present you with a list of values VirtualMachineGuestOsIdentifier and their long name equivalents. My goal is to create a service that other people can use to select the operating system they run on a new virtual machine. It is in favour of a 'portal' that develops where users will be "order" new virtual machines and manage their existing virtual machines.

  I know I can get the list of the VirtualMachineGuestOsIdentifier of the vim file - types.xsd our vCenter server but it is a huge file and it does not list the long names for possible values of the BONES. I want to somewhat make life easier for our web developers about it.

  I know how to get a guest operating system object, if I already have the value corresponding to the call to VcVirtualMachineGuestOsIdentifier.fromString (). But if I can get a list of all possible values?

  Please and thank you.

  Colin j.

  If you want to get the values of interactively simply use the input type.

  

  If you want to list these programmatically, use:

  var array = Server.findAllForType("VC:VirtualMachineGuestOsIdentifier");
  
  for each (var element in array) {
      System.log(element.value);
  }
  

• InDesign is the right tool for ebooks based on a browser (including videos and photos)

  This my first post, so please bear with me

  I am a teacher and I intend to write an eBook based on a browser (including videos and photos), accessible by my students, say, Safari or Chrome. Is InDesign the right tool for the job?

  Thank you!

  Probably not. It can create fixed EPUB3 of page layout files that can be found in the electronic book readers that support this standard. Currently, this includes iBooks (Mac OS X Maverick and iPad), readers of eBooks for Kobo and the plug-in on the browsers Chrome Readium. Support is growing and other platforms can support as well. But in general, InDesign does not create what you are looking for.

  You could try to build a Web site in Adobe Muse for use in web browsers.

• The possible values for fFileType when you add a file in frame files?

  Hello
  
  I did experiment with creating links to files in the framework Folders pane. Currently I have it works using the following parameters:
  
  fParentGUID: the GUID of the folder parent where the new link will be created.
  fFileType: the type of link that you want to create.
  dDocName: the name of the document to the target of the link.
  
  I was unable to find out what the possible values of fFileType. The value that I know is 'owner' but, my understanding of fFileType stops.
  
  I tried to find valid values in the 'Configuration Manager' applet (views-> FoldersFileTypes), but I'm unable to view/edit all values. It is said:
  "Cannot get to change the"FoldersFileTypes"view information. The "FoldersFileTypes" view isn't a view on a table. »
  While at the same time, it says in its description:
  "View of system on SharedObjects table FrameworkFoldersFileTypes.
  
  I guess then SharedObjects tables are not considered in tables (DB?). Then the question would be how to access the SharedObjects.
  
  Alternatively, if anyone knows of the documentation on that?
  
  Kind regards
  Niels

  The only two possible values are 'owner' and 'soft '.
  'soft' will create a shortcut to the item content link.
  It can be one and only one "owner" a link to a piece of content (consider this canonical location in the folder for the element tree).
  There may be several 'soft' links (shortcuts) for the content item.

• [JS CS3] Try to delete the discretionary hyphen for compound words

  Hello

  A unsightly typographical error is when a compound Word stops at the end of a line, but not to the hard hyphen. The solution is to add a conditional dash before or after (I can't tell if there is a difference here) the hyphen difficult. But sometimes one or two of the words in the compound word also have optional hyphens, so the words will break in any case.

  First of all, I have to eliminate all the optional hyphens in compound words, then have a function that calls a single conditional dash to the hard hyphen.

  I'm having a problem with the first function, which is copied below. It works fine except when the compound word is the final word in the text and this word has a conditional dash. It would be great if somebocy may report the error here.

  Thank you

  Tom

  myDoc var = app.activeDocument;

  Looking for a link with a word before and after.

  var hyphenatedWord = theGrepFinder (myDoc, "\ < \\w+\\ >-\ < \\w+\\ >" "");

  for (var hyphenatedWord.length - 1; g = g > = 0; g-) {}

  for (: var = hyphenatedWord [g].characters.everyItem (.contents.length - 1; h) > = 0; h-) {}

  If (hyphenatedWord [g].characters.everyItem (.silence [h]) == 1396983920) {number is conditional dash

  hyphenatedWord [g] [h] .characters .remove ();

  } //end if

  } //end h

  } //end for g

  Tom,

  I think you're kind of lost with this line: If (hyphenatedWord [g].characters.everyItem () .silence [h] is 1396983920): ask yourself if each character is an optional hyphen, what true isnever. This wotks for me:

  for (var hyphenatedWord.length - 1; g = g > = 0; g-) {}

  hyphenatedWord [g] .silence =. contents.replace hyphenatedWord [g] (/ \u00AD/g, "");

  }

  There is no need to scroll through the compound words found. \u00AD is the optional hyphen, so all you need to do is remove of the found items. Insert a discretionary hyphen at the beginning of the two members of the compound is easier separately by a find/change GREP:

  Search: (\w\w+)-(\w\w+)

  Change of: ~-$1-~-$2

  Peter