My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

Similar Questions

• Touchpad not working not for a few seconds after I touch it with your finger, then a more...

  I already tried SMC and reset the PRAM, but who doesn't. I found someone with such a similar problem (Trackpad doesn't work sometimes on MBP after upgrade OS X 10.8.2)

  but the measures that seem to work for them do not work for me.

  Thus, as described in the title. the touchpad works very well as long as I just touching with a finger, so scrolling with two fingers or by changing desktop computers do not work. the mouse freezes for a few seconds after I hit with 2 fingers. After about 3 seconds it starts working again.

  If there is someone with the same problem let me know!

  Technical specification:

  OS X El Capitan 10.11.6

  MacBook Pro (retina, 15 inch, mid-2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Video card: Intel Pro Iris 1536 MB

  flash memory: 500 GB

  I propose a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• Screen of HP Pavilion 15 turn off for a few seconds when I turn on or off charger

  Hello

  I bought new 15 hp Pavilion. I noticed several times when I turn on or turn off my charger, screen off for a few seconds and then after a few second screen turned on. Please help me its furstating me.

  > It is customary, and in this case necessary to provide you with the exact model of Notebook, you have a problem - with. [There are MANY variants of models of HP Pavilion 15 - T, for example.]

  > You should always be sure you have installed/applied all updates for all the hardware devices on your laptop, and all THE updates of Windows marked '' Important '' and all updated Windows "optional"-section for any hardware device in your laptop including service updates Windows detects (and offers an update). "."

  > For example, this link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=678785 has the latest HP drivers and patches for a specific variant of the Pavilion 15-T.

  > AFTER you are certain that you have all the latest drivers and patches on the spot, you can try the 'old trick' as follows: stop Windows; When your laptop is turned off completely (after complete closure), THEN remove the connector of the AC adapter / CC and remove the battery.

  > Hold DOWN the button of power without interruption for a full 60 seconds. Then replace your battery in your laptop. Do not connect your power adapter. Turn on the computer laptop and logon in Windows. Check the settings of control Panel\Power Options and know the level of your battery Charge. If it is less than 25%, then (and only then) plug in your adapter and connect it to your laptop... and leave the charge the battery up to "completely" to the level of 98 to 100%. * Note: If your card has a removable cord AC connector, make sure that the connection is "tight". If you still think that your adapter is defective, GET a NEW one! Damage a laptop for $400 - $800 is NOT worth it, compared to the cost of a new adapter.

  > Use the built-in help of your laptop on how to DISABLE (!) "Hibernation" and eliminate this CAUSING trouble 'feature' in Windows PC. When you did, always restart Windows, to be sure, the changes are applied. Many changes and take 'Entirely' product updates only "for" stop or "during" startup of Windows PCs. [while Windows O.S. 'turns', most of its system files is LOCKED].

  > FYI: let always your battery run down to him below highlights you plug in your sector/charger adapter. Charge a rechargeable battery 'medio-load-levels' causes shorter battery life...

• I get a blue screen for a few seconds after each reboot.

  Can you help me find how to solve this problem? Whenever the computer is now receiving a blue screen of death about 20 seconds after I see all my icons on the desktop after a reboot. I write this in safe mode on my computer.

  EMERALD ASH BORER

  These were related to fsni32. sys that is a pilot of F-secure.  I remove it and replace it with MSE

  You must also seriously update to SP2, without it, you're an obvious target for malware.

  http://www.Microsoft.com/security_essentials/

• Satellite R630-144: faded for a few seconds the time display time

  Hello

  I have problem with my laptop.
  From time to time the screen greyed out for a few seconds and restore again.
  It is not serious laptop runs on battery or plugged in.

  Can someone give me an advice?

  Hello

  Theoretically, it could be just a problem of software; for example, display driver starts to do strange things in this case, that I recommend the update or reinstall the display driver to check if it could contribute

  But it could also be a hardware problem; FL-inverter
  FL inverter is a small part that controls the backlight so theoretically, it could also be the FL inverter malfunction, but that's just my guess
  This should be checked by a technician for more information.

• my computer screen goes off for a few seconds and the lights without turning off the unit. This has happened several times, regardless of the period in which stays on.

  My computer operating system Mac Pro OS X EL Capitan 10.10.3, ink 13"early 2015 screen off for a few seconds and back on without turning off the unit.

  This has happened several times, regardless of the period in which stays on.

  Don't know what is happening with your publication details.  You posted in space of the Macbook Pro forum & even your profile indicates: ' MacBook Pro (retina, 13-inch, early 2015), OS X Yosemite (10.10.3)..

  Your post indicates you are using a Mac Pro, which is a desktop computer and with the help of El Capitan who is 10.11.2 not 10.10.3 which is Yosemite - 'my computer operating system Mac Pro OS X EL Capitan 10.10.3.

  

• Hi, I installed Lightroom and Photoshop, but the application does not launch when I try to start it. It shows 'OPEN' in the desktop menu. It doesn't show anything (busy for a few seconds) if I try to run it from the windows menu. Is there something else t

  That's what I see (blelow), but it shows on busy for a few seconds and no application is started:

  

  Hi bennievivier,

  • Not really necessary, can you please check your task manager, if somehow PS running in the background, also please try to put an end to all the process Adobe running in the background and then open PS and LR both and see if they launch.
  • Also, be sure that your Windows operating system is up-to-date.
  • If it still doesn't work then please try provide full permissions on all folders of adobe.

  Concerning

  Rohit

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Why my Macbook Pro hangs for a few seconds every time that I unlock it?

  Hello

  After the update (10.11.2 (15 c 50)), my Macbook Pro hangs for a few seconds every time that I unlock it!

  Even after rebooting, it's always the same problem.

  I have the MacBook Pro (retina, 15 '', Ende 2013)

  Thank you for your answers, I would appreciate all comments regarding this issue.

  Reset the PRAM.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

  Boot mode safe. http://support.Apple.com/kb/PH18760

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it, select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Laptop 15 R-063tu: black screen occurs for a few seconds when the charger is connconnected

  Mr President, there are a lot of problems occurred after the upgrade to windows 10 but I have a lot of them except that, when plugged into the charger for my laptop on the screen goes black for a few seconds(3-4) and even when I plugged. He was failed on the help of version.please victory 8.1.

  Hi there @Dip009,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you had upgraded to Windows 10 and now you have a problem with the screen going black when you plug the AC adapter or disconnect your laptop of HP 15-r063tu.

  You get an error with the black screen?

  Have you tried to see if you get the black screen in Mode safe?

  Have you tried to run the Troubleshooter of power?

  Have you checked the power settings to ensure that the brightness is not set to 0% when the power cord is plugged?

  

  Have you tried to go to change advanced power settings to ensure that none of these settings are defined to enable the black display when it is plugged in?

  Have you tried to do Windows updates?

  Have you tried to make updates using the HP Support Assistant? Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system at the time of purchase or need to be updated.

  Another option to try would be to go on the software of HP 15-r063tu notebook PC and the driver page, click the check now orange and HP will identify missing or outdated drivers and software necessary.

  I have a couple of documents for you to read for more troubleshooting. Here's one called Management of power (10 of Windows) Options. Here is another document for you to Microsoft called Troubleshooting black screen problems.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• roar of hard disk and the computer freezes for a few seconds

  My hard drive makes a sound whirring for a few weeks now and when I type in emails or messages like this, the computer freezes for a few seconds. Any ideas how to fix this?

  A desktop computer. Your problem could be overheating.

  You must remove the side panel right and remove dirt dust bunnies fans. Also, make sure that all the fans are working. Safety switch the computer off and pull the power cable before removing the side panel. You can then move the computer backon and check that the fans are working.

  Then, turn off the computer and some time for that cool. It is best to use a wrist band, which you set on the casing of the computer to you the earth before touching anything inside the envelope. You can buy one in a store of computer accessories. Static electricity can damage a motherboard if you don't take precautions.

  Then, you use a small brush to remove the sheep of dust around the fan on the processor. I used an electric razor, cleaning brush. I use an Air blower to clean the power supply fan. An air Duster is also useful fopr cleaning keyboards.

  Removal of the dust bunnies should reduce the noise that makes your computer. It can also reduce overheating, which can lead to errors of Blue Screen of Death.

  Another way to check the hard disk to see if it is overheating is to use HD Tune 2.55 (free):
  http://www.hdtune.com/download.html

  You have to scroll the page to see the freeware version.

• Videos will play for a few seconds and start the buffering again.

  Buffering

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  You download the video more slowly as you watch it. So when he says "buffering", he expects to catch up and download what you are willing to watch next.

  This type of internet connection do you have? Dialup? DSL? Cable? Whatever it is, it's too slow for what you do, or do you have some problem that it slows down.

• You tube problems and streaming video. System keeps the buffering, plays for a few seconds and starts the buffering all over again. Why and how can I fix

  On My Space, I can't watch/listen to the music streaming video and is similarly on YouTube.  The problem is persistent in all media streaming.  Videos open, play for a few seconds, then start buffering again. Why (?) How can this be fixed (?)

  Hello Maria,.

  Did you ever end up installing Silverlight or Flash?
  You can download and install the latest versions of both these sites:
  http://www.Silverlight.NET/
  http://get.Adobe.com/flashplayer/

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.