Index of the markers of the Viewer?

Similar Questions

• a question about creating index on the view

  Hi all
  
  I had a problem on the creation of an index on the view
  
  create index sys_ixf_viewpnuc_03 on view_pnuc (ugcode | privatenum);
  
  It's the sql I've run pl/sql
  
  the result of the server is:
  SQL error: ORA-01702
  01702 00000 - "a view is not appropriate here.
  
  Thanks for giving me a helping hand
  
  TKS

  Hello

  You can not use the index on the view...

  better, you can create a view with the best of the select statement with the specified indexed column...

  Since then, the view is nothing other than a select statement. If any changes in the index, alter in the table and create a consequence of the view...

  canno't ' t you create an index on a view except the materialized view

  Kind regards
  Deepak

• Search index of the secuence valuation until you reach a constant value table...

  Hello

  I have an arry of secuence RR values (its peak at the time of peak of ECG wave is seconds). I know that the added value of the paintings is the total time of sample data.

  I would like to separate in different charts in the representation of every hour of recorded data.

  I need to get a way to get the index where the number of added values are-online 3600 s (1 h).

  So that I can know the index of the arrays values to get the correct index in chart 1 h values, another index for another hour for an another graph,... so until you get the hourly chart several data can show.

  I hope you understand me.

  Best regards.

  Modulo division is performed by the function Quotient & remains on the digital palette.

  

  Work with tables and data DBL or integer types.

  When I use the method that Mike designed, in my view, the VI sometimes lacks a time transition. This happens with the simulated data that I generate because it is possible that the rest is different from zero. For example, this can happen if the accumulated sum is 3599.4 s and the next RR interval is 1.3 s. Which gives the following sum = 3600.7 s. The conversion by multiples of the amounts of 3599 and 3601. The remains are 3599 and 1 after modulo division. None are exactly equal to zero.

  I've changed this option to use DBL and then look the big negative transition. The minimum value may be with the largest range of RR in the data. However, there is always a great transition close to 3600 to near zero.

  Lynn

• Query on the view runs slower than the direct request

  Hi all

  I created a simple display and when I run the view she takes more time and when I run the query it answer quickly.

  Here are the plans of the explain command

  Query:

  Execution plan

  ----------------------------------------------------------

  Hash value of plan: 2867537711

  -------------------------------------------------------------------------------------------------------------

  | ID | Operation | Name                       | Lines | Bytes | Cost (% CPU). Time |

  -------------------------------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |                            |     1.   153.  107   (1)| 00:00:02 |

  |   1.  COUNT                         |                            |       |       |            |          |

  |*  2 |   OUTER HASH JOIN |                            |     1.   153.   107 (1) | 00:00:02 |

  |   3.    NESTED LOOPS |                            |     1.   101 |     4 (0) | 00:00:01 |

  |   4.     TABLE ACCESS BY INDEX ROWID | TBLWEBINSPR |     1.    58.     2 (0) | 00:00:01 |

  |*  5 |      INDEX UNIQUE SCAN | IDX_SUBSRIBER_WEBINSPR |     1.       |     1 (0) | 00:00:01 |

  |*  6 |     TABLE ACCESS BY INDEX ROWID | TBLMACCOUNT |     1.    43.     2 (0) | 00:00:01 |

  |*  7 |      INDEX RANGE SCAN | IDX_USERNAME_ACCOUNT |     1.       |     1 (0) | 00:00:01 |

  |*  8 |    TABLE ACCESS FULL | TBLTNETWORKSERVICEINSTANCE | 12828.   651K |   103 (1) | 00:00:02 |

  -------------------------------------------------------------------------------------------------------------

  
  

  Explain the Plan of view:

  Execution plan

  ----------------------------------------------------------

  Hash value of plan: 3639776364

  ------------------------------------------------------------------------------------------------------

  | ID | Operation | Name                       | Lines | Bytes | Cost (% CPU). Time |

  ------------------------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |                            | 12889.    61 M |   824 (1) | 00:00:10 |

  |*  1 |  VIEW                   | V5                         | 12889.    61 M |   824 (1) | 00:00:10 |

  |   2.   COUNTY |                            |       |       |            |          |

  |*  3 |    EXTERNAL RIGHT HASH JOIN |                            | 12889.  1925K |   824 (1) | 00:00:10 |

  |*  4 |     TABLE ACCESS FULL | TBLTNETWORKSERVICEINSTANCE | 12828.   651K |   103 (1) | 00:00:02 |

  |*  5 |     HASH JOIN |                            | 12889.  1271K |   721 (1) | 00:00:09 |

  |*  6 |      TABLE ACCESS FULL | TBLMACCOUNT | 12865.   540K |   583 (1) | 00:00:07 |

  |   7.      TABLE ACCESS FULL | TBLWEBINSPR | 17680.  1001K |   137 (1) | 00:00:02 |

  ------------------------------------------------------------------------------------------------------

  Query is:

  Select rownum as id, tw.subscriberidentity as user_identity, tw.password, tw.customertype, tw.expirydate, tw.status, nvl (decode (lower (tn.isportal), 'yes', 'yes', 'no', 'no'), 'yes') as passwordcheck,.

  fn_getEncryptionType (TM.encryptiontypeid) as encryptiontype, tw.servicetype, tn.maccount, tn.isroaming, tn.isportal, tn.iprange, lower (replace (fn_getmodemmac (tn.referenceaccountid),'-')) as modemmac,

  NVL(fn_getclientmac(TN.referenceaccountid),'A4-BA-DB-B7-FA-10') as clientmac, 'DEN Delhi address' as address, tn.networkkeyid, decode (lower (tn.isroaming), 'yes', null, 'no', "0:8 ='|") TN.iprange) as checkroaming,

  'ACC0000000' as cacno, ' [email protected] ' as cemailid, 'The account name' as cname, like cmobile's ' 7567077034', '66099965606' as coffice from (select distinct referenceaccountid, param2 Minventa, param4 )»

  IsRoaming, param5 isportal, param6 iprange, NTWRKSRVINSTANCEID networkkeyid of tbltnetworkserviceinstance where systemgenerated = 'n') tn, tw, tblmaccount tm tblwebinspr where

  TN.referenceaccountid (+) = tm.accountid and tw.subscriberidentity = tm.username and tm.accounttypeid = 'ACT08' and tm.systemgenerated = ' don't

  Please suggest.

  Kind regards

  Ronak Masudi

  You do not have show us the request, the view definition or the predicate for the plans section; but speculation obvious that you have included the rownum inside the view definition - which makes a view no-that can be merged that must be instantiated before the predicate of the query can be applied.

  Concerning

  Jonathan Lewis

• Why I can't create indexes on the table of RDF data

  When I tried to create indexes on the table of RDF data, it always say the table or view does not exist. I created the RDF model using java codes:

  Oracle Oracle = new Oracle ("jdbc:oracle:thin:@localhost:1521:orcl", "system", "123");

  Chart GraphOracleSem = new GraphOracleSem (oracle, "test2");

  
  

  And used the following commands in sqlplus to create indexes:

  SQL >

  SELECT THE SEPARATE OWNER, OBJECT_NAME

  FROM DBA_OBJECTS

  WHERE TYPE_OBJET = 'TABLE '.

  4. AND OBJECT_NAME like ' % TEST2;

  OWNER

  --------------------------------------------------------------------------------

  OBJECT_NAME

  --------------------------------------------------------------------------------

  SYSTEM

  TEST2_NS

  SYSTEM

  RDFB_TEST2

  SYSTEM

  TEST2_TPL

  OWNER

  --------------------------------------------------------------------------------

  OBJECT_NAME

  --------------------------------------------------------------------------------

  SYSTEM

  RDFC_TEST2

  
  

  SQL > connect as sysdba

  Enter the password:

  Connected.

  SQL >

  SQL >

  SQL > select * from TEST2_TPL;

  Select * from TEST2_TPL

  *

  ERROR on line 1:

  ORA-00942: table or view does not exist

  SQL > CREATE INDEX test2_sub_idx ON TEST2_TPL (triple. GET_SUBJECT());

  CREATE INDEX test2_sub_idx ON TEST2_TPL (triple. GET_SUBJECT())

  *

  ERROR on line 1:

  ORA-00942: table or view does not exist

  Hi Shifu,

  It is not recommended to use the SYS or SYSTEM to store/manage schema graph RDF data.

  Can you please try the following in a SQL * more terminal?

  SQL > conn system/eu1

  Connected.

  SQL >

  SQL >

  SQL > create user graphuser identified by graphuser;

  Created by the user.

  SQL > grant connect, resources, unlimited tablespace to graphuser;

  Grant succeeded.

  SQL > conn graphuser/graphuser

  Connected.

  SQL > create table graph_tpl (triple sdo_rdf_triple_s) compress;

  Table created.

  SQL > sem_apis.create_sem_model exec ('graphic', 'graph_tpl', 'three');

  PL/SQL procedure successfully completed.

  SQL > insert into graph_tpl values (sdo_rdf_triple_s ('graph', '', '', ''));

  1 line of creation.

  SQL > select count (1) in the mdsys.rdfm_graph;

  1

  You see the same result?

  Thank you

  Zhe Wu

• No index on the primary database. Need help with "COUNT OFF"; option

  11 GR 2 11.2.0.3 under linux

  Hi everyone,.

  It's an honor to be with you guys.

  I have a big question here and I am unable to decide on a permanent solution.

  We have a primary database that is configured to have a logical expectation.

  The logic of the day before was not built by me. But I'm now support...

  So as the title suggests, there is NO primary index / unique + not null on a large number of tables in the database of emergency primary/logic. But the application logic guarantees uniqueness values rather than null.

  Here is where the problem starts.

  Guys request DO NOT want us to create an index on the primary database.

  According to my understanding, because the database lack of clues, the apply SQL must do a full table scan whenever it changes / remove data. It is a very expensive process and consumes a lot of time. This takes hours together to apply a minute with a value of newspapers on the logic of the eve... A huge lag is created during the hours and is not acceptable.

  So as I told you earlier, the guys request do not want an index on the tables not supported.

  They use the database pending logic exclusively for information purposes and it's like production for them...

  
  Let me give an overview...

  According to the document on the creation of the logic of the day before for 11.2 as below

  http://docs.Oracle.com/CD/E11882_01/server.112/e41134/create_ls.htm#SBYDB4730

  Step 1 to find tables without identifying unique logic in the primary database.

  Query the DBA_LOGSTDBY_NOT_UNIQUE view to display a list of tables SQL may not apply be able to uniquely identify. For example:

  SQL> SELECT OWNER, TABLE_NAME FROM DBA_LOGSTDBY_NOT_UNIQUE

   2> WHERE (OWNER, TABLE_NAME) NOT IN 

  3> (SELECT DISTINCT OWNER, TABLE_NAME FROM DBA_LOGSTDBY_UNSUPPORTED) 

  4> AND BAD_COLUMN = 'Y'; 

  The above query has 1040 tables in a particular schema. All the these have no index is not null primary / unique.

  
  Now according to the step 2 as below, we have an option to add a disabled RELY primary key constraint.

  Step 2 Add a disabled RELY primary key constraint.

  If your application provides the rows in a table are unique, you can create a primary key disabled RELY constraint on the table. This avoids the overhead of maintaining a primary key on the primary database.

  Can someone explain what this RELY constraint is disabled and how to function and help please?

  
  I have a few questions about the constraint to RELY.

  (1) change current plans of optimizer on primary for the execution price?

  (2) can help to boost the performance of SQL apply without creating index on the logical standby database?

  (3) it will change current plans of optimizer logical pending for the SQLs running?

  What are the options that I need to increase the performance and table scan complete engine AVOID SQL apply on the logic of the day before?

  Thanks a ton for reading my post.

  
  Kind regards

  Abhishek

  In fact, I've implemented a key primary rely disabled on primary and unique index on the logic of the previous day.

  The logic of Eve runs lightning fast now

• Mark images in the Viewer? AE CC

  Is there a way? I am 18; 12 with the film in a pane of the Viewer.  I want to put a mark.  Of course, I can just write with a pen on the back of an envelope (or try to remember the 1812 opening) but there must be a way to make a mark on the film itself? Impossible to find info

  If you mean the display of source code, then no.. If it's a layer COMP viewer Viewer, you can just place markers comp or layer with the key multiply on the numeric keypad.

  Mylenium

• Load the view definitions in the short data store

  Hi all
  
  If I was able to export the view definitions that there was error on next import
  «"substring on column 5 26 line - ' String index out of range:-161 '"»
  
  I tried the graphic loadviewdefinitions of the QuickStart project and it came with the same error. I also deleted the definition of the base xml view but it error persists.
  
  Thank you

  Please visit the wiki updated post for how to import the display configuration in the format provided by the design of view export configuration template:

  https://wikis.Oracle.com/display/endecainformationdiscovery/import+view+configuration

  -Ryan

• Reg - Index of the functional basis

  Hi all
  In our application, we have a clue of the type below
  

  CREATE INDEX sme_idx ON sme_tbl(sme_col,1,2)

  And when I view its details in ALL_INDEXES noted as NORMAL of BASIC FUNCTIONAL index, from my first glance I misread it as SUBSTR, but I'm not able to represent something of the syntax.
  
  What does '1.2' mean here? What is the use of having this kind of clue?
  
  Please help me.

  He held a function-based index, because the right-hand columns are constants.

  If it is not uncommon to have a constant leak like that to be sure that nulls in SME_COL are included in the index, I don't understand why you would have two constant end. I would have thought that it was an error, typo, or just a complete misunderstanding.

• index of the tablespace

  Hello
  
  In our Organization, all indexes should be in there own separate tablespace. When poking around the inside of the Data Modeler, I don't see anyway to specify the space of storage that is recommended to use a particular index. The DOF it generates seems to omit the tablespace for indexes option. Any suggestions?

  In the left navigation pane, open the relational model. You should see a node for physical models (under the subview node). That open. There should be at least one there (10g or 11g depending on what DDL you have generated). Click with the right button on this node and select open (this is the part that is not intuitive). Now you should see a bunch of new nodes in the physical model including Tablespaces. Describe your tablespace names here. Once this is done, in the physical model, open the Tables nodes and then open one of your tables, then the index under that node. Double-click an Index name - this will give you a property box where you will find a table field with a drop down menu to your do the assignment.

  You can also set the default Tablespace Index like this:
  In the main menu:
  Tools-> preferences-> data-> model-> physics maker-> Oracle
  Check the "Index Template" box and then click View/Edit. This will give you a place to specify a default tablespace name that will then be generated in the DDL automatically for all indexes on this design.

• Separating the view States

  Hi all

  I'm in following This example on LiveDocs Flex to create reports in ActionScript. Now, I want to separate the logic of the actionscript in a presentation model.

  Presentation model pattern has been in a series of Articles by Paul WIlliams.

  I'm confused about its implementation in these points:

  • When I put in AS relativeTo property, how will access an element defined in a display in the presentation model class?
  • How will bind the currentState to a variable in the model of my presentation?

  Can someone give me please a summary of how to implement this?

  Thanks and greetings

  ShiVik

  ShiVik,

  Now, I understand perfectly what you are after. Unfortunately, in my opinion, using the States of Flex is really messy and it is often preferable to have the display updated directly from a model presenter, rather than having the updated view of the States which are updates to the model presenter. I also like to separate the model from the view and the controller. But since they are all in the blog on the presenter, I'll keep them together.

  So what you want to do, is to have your point of view mxml to declare an instance of a presenter:

  protected var model: PresenterModel = new PresenterModel();

  PresenterModel has a property for each chart element property in the mxml view that must be updated:

  public var user: UserVO = null;

  PresenterModel has a method for each event of the GUI in mxml view that needs to be addressed:

  public void showUser (index): void

  {

  user = userList.getItemAt (index) as UserVO;

  }

  Your view links components to the elements in the template:

  Your view handles the events by calling methods on the model:

  The effective way to show and hide according to the State of things is like this:

  In the model:

  public static const = "init INIT:String."

  public static const NORMAL: String = "normal";

  public static const ERROR: String = "error";

  public var viewMode:String = INIT;

  Notice:

  For recovering and sending data, the PresenterModel can use Cairngorm events since you are using Cairngrom.

  So, whenever there is interaction with the user, the event calls a method on the PresenterModel, and that the method updates the PresenterModel property, then the display updates via links.
  This system (even if I use a different class to model and controller) worked very well for me on major projects from the beginning to the end. It does never messy.
  Thank you
  Philippe

• JavaScript to create indexes, accumulating the character offset

  HI wonder-workers in script-index

  I have a script that I run on a single document of two or 160 pages of a list of terms to index.

  He does the job, but has a tendency to misplace the index gradually plu markers offset from the actual location of the actual target word.

  The direction of the offset changes depending on whether I increments to the top or to the bottom of my list of txets returned from the story.search.

  With the help of CS2, there are notes.

  The offset is not exactly = number of referrals met so far, but largely move with about 60% of it (I have not checked it in detail) with 1000 points in a few pages later have on an offset of 50char of the s word in my file list.

  Very little havewords in my index notes, although 1 or 2 I am OK to catch them just.

  I tried réinvoquant story.search to create a new pageReferences.add list text after each (or 1/5)

  in the case where the insert of the index mark creates the shift - but this makes it just run more slowly and does not solve the problem.

  Most of the refs index will be correct but there will inevitably be some that drop from page to page x-1 x

  Any ideas where I should look?

  The monarticle var becomes a copy or a pointer to the changing history?

  for (var s = 0; s < doc.stories.length; s + +) {}
  var monarticle = doc.stories.item (s);
  
  If (myStory.length > 800) {/ / avoid the small objects-history (notes, headings, etc.)}
  toIndex = myStory.search (myUpper); With drop cap index entry in this text of story
  If (toindex.length > 0) / / found the text at least once...
  {
  newtopic = doc.indexes [0].topics.add (myUpper);
  r = 0;
  for (i = toindex.length - 1; I > - 1; i--) / / this way brands DRIFT after Word
  for (i = 0; I < toindex.length; i ++) //marks DRIFT before term
  {
  r ++ ;
  Try
  {
  newtopic.pageReferences.add (toindex [i], PageReferenceType.currentPage);
  If (r == 5) {}
  toIndex = doc.stories.item (s) *.search (myUpper); costs of time, help? restart DERIVES every 5th round
  r = 0;
  }
  }
  catch (_)
  {
  many of them will be the places of reference...
  Alert ("' problem of Index >" + myUpper + "< item" + i + "can be in a note" ');
  }
  

  Good tests! I wasn't sure what version of Indesign had the problem of the terrible table, CS1, or CS2, he was apparently CS2. The problem with tables was that they slowed down the scripts to a pathetic crawl. It seems that they affect scripted index as well.

  By placing all of the tables in their own frames I had the problem of overall speed.
  Maybe it works for the drift of the index as well. Worth a try.

  Peter

• Questions about the views system...

  Hello
  
  (1) why this 2 queries are not similar?
  
  Select count (*) from SAMPLE_TABLE;
  Select num_rows from user_all_tables where table_name = 'SAMPLE_TABLE. "
  
  (2) in the views system, I can learn about primary piece?
  
  (3) where I can the description of each of the views system and what information it contain?
  
  Best.

  (a) the statistics in views because _TABLES are only updated when you calculate freshly statistics, while the number of rows in a table established by count (*) is dynamic and always up-to-date.
  (b) what do you know about primary keys? The columns that make up their, for example? USER_CONSTRAINTS where constraint_type = 'P' will tell you what primary key constraints exist and the indexes are used to enforce them. You can then do a query of USER_INDEXES and USER_IND_COLUMNS to work on the columns are part of these indices, where they are stored and so on.
  (c) the official documentation lists each view (see part II of this page, for example: http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/toc.htm)

• How it warns Oracle to use an index for the join of two tables...

  How to prevent the Oracle to use an index for the join of two tables to get a view online that is used in an update statement?
  
  O.K. I think I should explain what I mean:
  
  When you join two tables that have many entries sometimes there're better is not to use an index on the column that is used as a criterion to join.
  
  I have two tables: table A and table B.
  
  Table A has 4,000,000 entries and table B has 700,000 entries.
  
  I have a join of two tables with a numeric column as join criteria.
  
  There is an index on this column in A table.
  
  So I instead of
  

    where (A.col = B.col)

  I want to use
  

    where (A.col+0 = B.col)

  in order to avoid Oracle using the index.
  
  When I use the join in a select query, it works.
  
  But when I use the join as inline in an update statement I get the error ORA-01779.
  
  When I remove the '+ 0' the update statement works. (The column is unique in table B).
  
  Any ideas why this happens?
  
  Thank you very much in advance for any help.
  
  Hartmut cordially

  You plan to use a NO_INDEX hint as shown here: http://www.psoug.org/reference/hints.html

• How to change the view to playlist on iTunes 12.4.2 in windows?

  12.4.2 iTunes is the worst piece of trash program I've ever tried sailing, and I can't even downgrade easily, nice going Apple. Previous version showed a button that would lead to a drop-down list to view what I want on my playlists, and now they are stuck in this very large point of view instead of list view I want. Thanks in advance.

  Use the view > see... menu.

  TT2